Hydrostatic Level Monitoring Equipment For Monitoring And Testing Available In Belarus
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The plastic submersible probe LMK 807 is designed for continous level measurement for waste water or and different aggressive media. Basic element of the plastic submersible probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and elastomer materials are available in order to achieve maximum media compatibility. ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 382H has been designed for continous level measurement in waste water, waste and higher viscosity mediums. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels. Features: - nominal pressure range 0 ... 60 cmH2O up to 0 ... 200 mH2O - accuracy: 0.1 % FSO - diameter 39.5 mm - HART®-communication (setting of offset, span ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe – piezo-resistive stainless steel measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in clean to slightly polluted liquids. With piezo-resistive stainless steel measurement ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was developed for level measurement in waste water, sludge or water courses. The ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The slimline probe LMK 306 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids. Different cable sheath materials are available in order to achieve maximum media compatibility. Features: - nominal pressure: 0 ... 6 mH2O up to 0 ... 200 mH2O - accuracy: 0.5 % ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The precision screw-in transmitter LMP 331i demonstrate the further development of our industrial pressure transmitters. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation and the transmitters with excellent maesurements and exeptionally attractive price to offer on the market. ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The level transmitter LMK 307 is designed for continuous level measurement in water or waste water applications. Basic element is a flush mounted ceramic sensor. Suitable for all fluids which are compatible with media wetted materials. Different cable and elastomer matierals can be offered according to the customer-specific operating conditions. Features: - nominal pressure: 0 ... 4 mH2O up to 0 ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe 4 - 20 mA for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell and free configurable measurement range via ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 387H was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outer diameter is only 22 mm, whereby the installation or retrofitting can be easily carried out in 1 "pipes or in confined installation ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe with 1” thread and 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Hang-in probe with capacitive ceramic measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure range 0 ... 60 cmH2O up to 0 ... 100 ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O - ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable plastic immersion probe LMK 858 was designed for level measurement in aggressive media, desalination plants and for use in more viscous media such as sludge. Since the area of application is often outside a building, great emphasis was placed on high surge / lightning protection. The immersion probe is based on an extremely robust and precise pressure sensor, the membrane of which ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 382 has been designed for continous level measurement in waste water, waste and higher viscosity media. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily. Features: - nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O - accuracy: 0.35 % (opt. 0.25 %) FSO - diameter 39.5 mm - especially for sewage, viscous ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The LMK 806 with ceramic sensor and diameter from only 21 mm has been especially designed for the continuous level measurement at confined space conditions. Permissible media are waste water or and different aggressive media. Basic element of the plastic submersible probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMP 307i is designed for continuous level measurement in water and clean or lightly polluted fluids. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with good long term stability Features: - nominal pressure from 0 ... 4 mH2O up to 0 ... 200 mH2O - output signals: 2-wire: 4 ... 20 mA, 3-wire: 0 ... 10 V (others on ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
BD|SENSORS has developed the LMK 307T for continuous level and temperature measurement in water or waste water applications. The advantage: simultaneous recording of level and temperature with separate independent signal amplification. The maintenance and wiring costs are considerably reduced. In addition to classical signal processing of the level, an additional signal circuit independent of ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The plastic submersible probe LMK 809 is designed for continous level measurement in waste water or in most of aggressive media. Basic element is a capacitiv ceramic sensor. Basic element of the plastic probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and seal materials are available in order to achieve maximum ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMP 308 is designed for the continually level measurement of water and thin fluids. In order to facilitate stock-keeping and mainten-ance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O - accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO - diameter 35 mm - ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you