Hydrostatic Level Monitoring Equipment For Monitoring And Testing Available In Iraq
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O - ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was developed for level measurement in waste water, sludge or water courses. The ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. For level measurement in river courses, on weir systems or in locks, great emphasis was placed on overvoltage / lightning protection. In addition, the cable can be protected against bites if ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 382 has been designed for continous level measurement in waste water, waste and higher viscosity media. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily. Features: - nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O - accuracy: 0.35 % (opt. 0.25 %) FSO - diameter 39.5 mm - especially for sewage, viscous ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The screw-in transmitter LMP 331 has been designed for continuous level measurement and is characterized by an excellent performance and a robust construction. The modular construction allows the user the highest possible flexibility in the adaption of LMP 331. Optional features like e.g. an intrinsically safe version or a functionally safe version (SIL 2) increase the advantages when launching ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Screw-in with capacitive ceramic measurement cell. Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water, wastewater and gases. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMP 308 is designed for the continually level measurement of water and thin fluids. In order to facilitate stock-keeping and mainten-ance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O - accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO - diameter 35 mm - ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The LMK 458H has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 85 °C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. The basis for the LMK 458H is a capacitive ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For easy installation of hydrostatic sensors. The mounting accessories allow the quick and easy installation of hydrostatic level pressure sensors. The solid high-quality accessories are made of stainless steel 1.4571 and are suitable for indoor and outdoor ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The plastic submersible probe LMK 809 is designed for continous level measurement in waste water or in most of aggressive media. Basic element is a capacitiv ceramic sensor. Basic element of the plastic probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and seal materials are available in order to achieve maximum ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Hang-in probe with capacitive ceramic measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Diameter 19 mm – ideal for deep wells. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement. Suitable for measurements in deep wells through small diameter of only 19 mm. With piezo-resistive stainless steel measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Mobile measurement system for discharge measurement in watercourses, such as rivers, streams and canals. The NivuFlow Stick is a mobile measurement system for discharge measurement in watercourses, such as rivers, streams and ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Level and temperature measurement with a system lifetime up to 5 years. Internal SD card up to 1.000.000 readings. For use in ATEX Zone ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The screw-in transmitter LMK 351 has been designed for measuring small system pressure and level measurement in container. The LMK 351 is based on an own-developed capacitive ceramic sensor element. Usage in viscous and pasty media is possible because of the flush mounted sensor. For the usage in aggressive media a pressure port in PVDF and the diaphragm in AI2O3 99.9 % is available. An ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Process measurement transmitter with DIN rail enclosure. Multifunctional process measurement transmitter with LED display for Ex- enabled 2/3-wire sensor supply. For hydrostatic level ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The screw-in transmitter LMK 331 has been especially designed for level and process measurement and is suitable for pressure measurement of liquids, oils and gases. Usage in more viscous or polluted media is possible because of the semi-flush pressure sensor. For the usage in aggressive media we recommended the version with PVDF pressure port. Additional features like e.g. an intrinsically safe ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMP 307i is designed for continuous level measurement in water and clean or lightly polluted fluids. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with good long term stability Features: - nominal pressure from 0 ... 4 mH2O up to 0 ... 200 mH2O - output signals: 2-wire: 4 ... 20 mA, 3-wire: 0 ... 10 V (others on ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The plastic submersible probe LMK 807 is designed for continous level measurement for waste water or and different aggressive media. Basic element of the plastic submersible probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and elastomer materials are available in order to achieve maximum media compatibility. ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 387H was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outer diameter is only 22 mm, whereby the installation or retrofitting can be easily carried out in 1 "pipes or in confined installation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you