Hydrostatic Level Monitoring Equipment For Monitoring And Testing Available In USA
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The LMK 458H has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 85 °C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. The basis for the LMK 458H is a capacitive ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. Since the area of application is often outside a building, great emphasis was placed on overvoltage / lightning protection. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe 4 - 20 mA for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell and free configurable measurement range via ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The screw-in transmitter LMK 351 has been designed for measuring small system pressure and level measurement in container. The LMK 351 is based on an own-developed capacitive ceramic sensor element. Usage in viscous and pasty media is possible because of the flush mounted sensor. For the usage in aggressive media a pressure port in PVDF and the diaphragm in AI2O3 99.9 % is available. An ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The screw-in transmitter LMK 331 has been especially designed for level and process measurement and is suitable for pressure measurement of liquids, oils and gases. Usage in more viscous or polluted media is possible because of the semi-flush pressure sensor. For the usage in aggressive media we recommended the version with PVDF pressure port. Additional features like e.g. an intrinsically safe ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe with 1” thread and 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The precision screw-in transmitter LMP 331i demonstrate the further development of our industrial pressure transmitters. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation and the transmitters with excellent maesurements and exeptionally attractive price to offer on the market. ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Mobile measurement system for discharge measurement in watercourses, such as rivers, streams and canals. The NivuFlow Stick is a mobile measurement system for discharge measurement in watercourses, such as rivers, streams and ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The screw-in transmitter LMP 331 has been designed for continuous level measurement and is characterized by an excellent performance and a robust construction. The modular construction allows the user the highest possible flexibility in the adaption of LMP 331. Optional features like e.g. an intrinsically safe version or a functionally safe version (SIL 2) increase the advantages when launching ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For easy installation of hydrostatic sensors. The mounting accessories allow the quick and easy installation of hydrostatic level pressure sensors. The solid high-quality accessories are made of stainless steel 1.4571 and are suitable for indoor and outdoor ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. For level measurement in river courses, on weir systems or in locks, great emphasis was placed on overvoltage / lightning protection. In addition, the cable can be protected against bites if ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 382H has been designed for continous level measurement in waste water, waste and higher viscosity mediums. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels. Features: - nominal pressure range 0 ... 60 cmH2O up to 0 ... 200 mH2O - accuracy: 0.1 % FSO - diameter 39.5 mm - HART®-communication (setting of offset, span ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Screw-in with capacitive ceramic measurement cell. Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water, wastewater and gases. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Screw-in probe stainless steel measurement cell piezo-resistive. Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water, wastewater and gases. With piezo-resistive stainless steel measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Process measurement transmitter with DIN rail enclosure. Multifunctional process measurement transmitter with LED display for Ex- enabled 2/3-wire sensor supply. For hydrostatic level ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 387 was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the front-flush ceramic diaphragm faciliates an easy disassembly and cleaning of the probe in case of service. Compared to the level probe LMK 382 the outside-diameter is only 22 mm, which allows an easy installation and backfitting in 1" tubes or ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The LMP 308i is designed for continuous fill level and level measurement of water and liquid mediums. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation of sensor intrinsic deviations from normal condions like nonlinearity and thermal error. In order to facilitate stock-keeping ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The LMK 458 has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 125 °C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. The basis for the LMK 458 is a capacitive ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe DCL 551 with RS485 in-terface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data are transferred in binary form. DCL 551 has been designed for hydrostatic level measurement in ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Diameter 19 mm – ideal for deep wells. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement. Suitable for measurements in deep wells through small diameter of only 19 mm. With piezo-resistive stainless steel measurement ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you