Inclinometers Equipment For Monitoring And Testing Available In New Brunswick
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Radial displacements along vertical or horizontal measuring lines are measured automatically and continuously with inclinometer measuring chains (Clino-Chain). The Clino-Chain consists of measuring elements connected with ball joints, which can be 0.5 m to several metres long. The measuring elements are equipped with precise, long-term stable inclination sensors. The measuring accuracy in ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The digital inclinometer probe is used for section-by-section displacement measurements radial to the axis of the measuring tube. The probe has a base length of 0.5 or 1.0 m. The vertical inclinometer is used in vertical boreholes and the horizontal inclinometer in horizontal boreholes. These probes can be integrated into the system of displacement measurement along lines (combination with ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The sliding micrometer measuring line is formed by the measuring tubes installed in the ground, rock or ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Measure excess pore pressure that is generated during soil penetration with our digital CPTU piezocone testing system. In the quotations, Gouda Geo-Equipment issues a clear distinction is made between on one hand the CPT penetrometer pusher (this could either be a truck-based, crawler-based, trailer-based or stand-alone unit) and on the other hand the CPT system (this could either be mechanical ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
Welcome to the steerable, zero-emissions, portable, battery-powered TROGLOTREK Sewer Crawler. This robot is one of the smallest options on the market, able to inspect straight 4" (100mm) pipes, and light enough for a single operator to pick it up, transfer it to a jobsite, run the inspection on battery power with no additional cables, generators, and carry it back. This crawler can be efficiently ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Crawler-Truck CPT Penetrometer Rig (lightweight) – Max. 170 kN. The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The TROGLOTREK Sewer Crawler is a steerable, zero-emissions, portable, battery-powered robot designed for inspecting straight 4" (100mm) pipes. It is one of the smallest options on the market and light enough for a single operator to easily transfer it to a jobsite. The robot can run inspections on battery power without the need for additional cables, generators, or inverters. Optional ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT crawler-truck is a CPT penetrometer rig based on a truck-chassis provided with a crawler undercarriage. The crawler-truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT crawler-truck, either an electrical or mechanical ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 150 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
New SIGMA HD advanced pipe crawler is an extremely reliable, expertly designed steerable pipe inspection robot that is loaded with great features. These units are one of the most advanced and affordable crawlers which can be used to inspect storm water lines, sewer drainage and construction areas, duct work, pipe/gas lines, and industrial sites. This is perfectly suited to use in areas from 150mm ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The Gecko 9060 steerable pipe inspection robot is a sturdy compact device designed and manufactured in Germany to be versatile and productive. It can be used to inspect a wide range of pipes, duct work, and industrial sites. The crawler comes with an is interchangeable 78mm (3”) auto-leveling, pan and tilt camera head and a 120 meter (394 ft.) cable. These units are great for inspecting ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design operates by only allowing any excess water in the system ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The inclinometer casing tubes are designed to accommodate all commercially available inclinometers. They provide access and precise orientation for both wheel-mounted and fixed inclinometers. They are primarily used to monitor the stability of embankments, dikes slopes, rock cuts, foundations, excavation walls, piles, coffer dams, slope areas, ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The SIGMA HD-LR (LONG RANGE) pipe crawler is specifically designed to inspect extra-long distances up to 6,560 feet in a single run. It is an extremely reliable, expertly designed steerable pipe inspection robot that is loaded with features. These units are one of the most advanced and affordable crawlers which can be used to inspect pipelines of extra ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The sliding deformeter measuring line is formed by the measuring tubes installed in the ground, rock or structure. The measuring tubes consist of telescopic couplings made from ABS and HPVC connecting tubes. The connection between the telescopic coupling and the measuring tube can optionally be made water ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 110 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The ability to accurately measure, transmit, and record mooring line tension on critical offshore platforms is important to assure safety by maintaining mooring line tensions within established design limits. The RAR Plus offers this mooring tension monitoring capability with redundant methods. An integrated strain gauge provides direct measurement, while integrated depth sensor and inclinometer ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The STORMER S3000 Pipe Crawler is an all-in-one device used to inspect pipelines in diameters from 150 to 1000 mm (6" - 40"). It is manufactured in England and features a dependable, sturdy design offering users the ultimate inspection experience and true portability. As of today, this unit is one of the most efficient, easy-to-use and affordable pipe crawlers on the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates by only allowing any excess water in the system to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you