Only show results available in Virginia? Ok

Industrial Gas Detection Applications

  • Gas detection analyzers for solvent based printing industry

    Solvent based inks in different colors and patterns are applied to paper, plastic, film and foil substrates. Finished products include all sorts of wrapping paper, wall covering, candy wrappers, flexible food packages, shrink labels, high quality magazines and many, many more. These industries employ ovens or dryers to remove the solvents from the finished product.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • End Point Detection

    Hiden Ion Milling Probe – End Point Detector The only dedicated end point determination tool for ion etch control and optimum process quality. End point Analysis. Target Impurity Determination. Quality Control / SPC. Residual Gas Analysis. Leak Detection The IMP is a differentially pumped, ruggedized secondary ion mass spectrometer for the analysis of secondary ions and neutrals from the ion mill process, featuring: High Sensitivity SIMS / MS with Pulse Ion Counting Detector. Triple filter Quadrupole, 300 amu mass range is standard. Differentially Pumped Manifold With Mounting Flange to Process Chamber. Ion Optics with Energy Analyser and integral ioniser. Penning Gauge and interlocks to provide over pressure protection. Data System with integration to the process tool. Stability (less than ±0.5% height variation over 24 h). MASsoft control via RS232, RS485 or Ethernet LAN. Programmable DDE, Parallel Digital I / O, RS232 Scripting Communication

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Gas detection analyzers for coil coating industry

    Coil Coating is a high-temperature solvent vapor monitoring application in which rolls of aluminum or steel are coated with a color finish, oven cured to desired specs and sold to makers of cans, rain gutters, home appliances, building & automotive products and other fabrications. Coil coating requires the use of our PrevEx Flammability Analyzers to monitor the flammability of the solvent vapor driven off during the drying process. PrevEx analyzers accurately measure solvent mixtures and can withstand the temperatures required to prevent sample clogging in coil coating plants.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Freeze Drying

    Lyophilization, commonly referred to as freeze drying, is the process of removing water from a product by sublimation and desorption. The freeze drying process is optimised by the introduction of solvents and gas species to improve product quality and to enhance the drying process. Hiden's gas analysers provide detailed information about the gas/vapour composition during both the primary and secondary drying phases. Detection of the on-set of the secondary drying phase is readily detected. Analysis during the secondary drying phase enables a reduction in process cycle time and provides end point detection. Accurate determination of a user defined process 'end point' enables high consistency in product yield from batch to batch.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Oxygen Generating Systems for Waste Gas Treatment in the Semiconductor, PV and LED Industries

    Waste gas treatment is an often overlooked but important function of Semiconductor, PV and LED fabrication. Several serious accidents have taken place in factories where no abatement was installed. Even today waste treatment is often seen as a cost rather than a safety issue. There are three main reasons why waste gas treatment is installed in factories: health and safety, environmental factors, and quality control.

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Integrated real-time gas analysis solution for R & D industry

    Universities and research institutes, including federal agencies and laboratories, regularly call upon CIC Photonics to custom design and fabricate gas cells and FTIR gas analyzers for innovative research studies. Their research spans a range from the synthesis of new chemicals to spectroscopy of the universe. Hence, their requirements often demand the complete utilization of the company’s staffing skills in physical chemistry, chemical engineering, optics, mechanical engineering, and electronic engineering, as well as computer programming.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Residual Gas Analysis

    Residual Gas Analysis is a general term for the analysis of gas and vapour species in vacuum chambers and vacuum processes. The Hiden RGA series quadrupole mass spectrometers provide for routine, fast, wide dynamic range residual gas analysis, measuring the partial pressures of the species that are critical to vacuum quality and process requirements. Applications include: vacuum chamber leak detection vacuum quality measurement and monitoring virtual leak detection outgassing studies bakeout cycle/vacuum pump down monitoring

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Gas Production and Storage

    Hiden's gas analysers provide for high sensitivity analysis of gases and vapours from gas production and storage facilities. Gas analysers provide for: Bottled gas quality assurance Diving gas monitoring Medical gas Semiconductor gas

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Integrated real-time gas analysis solution for specialty gases industry

    CIC Photonics’ extensive experience with gas analysis has also included what the industry refers to as Specialty Gases, as distinguished from Semi Gases, Electronic Specialty Gases, and Industrial Gases. Specialty Gases are high purity gases used across many applications by researchers, by government agencies, and by commercial businesses. Included among these users and applications are: hospitals for medical gases; environmental labs and testing companies for blends of protocol gas mixtures; calibration gases; spectroscopy standards; gas composition measurements and confirmations; and others.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Nitrogen generation for the Marine, Oil & Gas industry

    Marine conditions pose a number of challenges and issues. Size, weight, rough sea conditions, corrosion, high temperatures, cargo needing protection, just to name a few.Oxymat’s Marine, Oil & Gas division produces nitrogen PSA generator systems to the marine industry with the necessary experience and know-how to address these issues. Compared to a traditional membrane based system, PSA systems significantly decrease redundancy and can cut energy consumption with up to 30%. In addition, a PSA system can produce 5% or lower oxygen levels.With the highest quality in components, PSA systems are extremely reliable with at least 48.000 running hours before CMS replacement is needed.

    By Oxymat A/S based in Helsinge, DENMARK.

  • Gas Detection Solutions for Carbon Fiber Manufacturing Industry

    The carbon fiber manufacturing industry requires a unique process control solution that conventional gas detection technology lacks. Boreal Laser’s line-of-sight laser based gas detection system is the perfect fit for measuring HF in various pan oven applications and stack emissions monitoring . Whether you are looking for gas detection solutions for safety, environmental or process control needs Boreal Laser has you covered.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Landfill Gas Monitoring for the Bioenergy Industry

    Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen (O2).

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Premium

    Gas Leak Detection for the Gas Industry

    Sewerin gas detection instruments are used to identify and quantify gas leaks in natural gas distribution networks. Designed to be intuitive to use for many different tasks in the gas utility industry the infrared sensors ensure accuracy and sensitivity. Our equipment is used in many countries by all the world`s major gas supply companies.

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Premium

    High technology gas generators for air monitoring industry

    Air Monitoring Industry.

    By Leman Instruments SAS based in Archamps, FRANCE.

  • Premium

    Measurement of hydrogen in fuels for oil & gas industry

    The combustion properties of fuels are key to the efficient and safe operation of engines used in machinery and plant. One important way to measure the combustion properties of a fuel is by its hydrogen content. The measurement of hydrogen content is widely used for the characterisation of aviation fuel but with the increasing costs of all fuels and the greater incentives for fuel adulteration, this test is increasingly being adopted for non-aviation applications. Our benchtop NMR analyser MQC-23 system is widely used for the measurement of hydrogen in fuels in accordance with ASTM D7171-05.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Flow meters for the process control & manufacturing

    Sierra`s mass flow meters and controllers are widely used in the process control and manufacturing industries. From bulk gas delivery to cleaning to purging operations, Sierra`s mass flow meters and controllers offer the simplicity and robustness demanded in these applications. Our ability to handle corrosive gases, high flow rates and multiple gases with the same unit makes Sierra`s mass flow meters and controllers a tool-makers choice.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Argon mass flow meters flow solutions

    Thermal mass flowmeters and controllers are ideal for Argon application where precision is key. Sierra specializes in accurate mass flow measurement and/or control of Argon gas. Popular applications range from general industrial process control, inerting and steel purification processes to name a few.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Industrial solutions for the carbon dioxide (co2) lasers

    Carbon Dioxide (CO2) lasers are high power lasers, usually used for cutting of ferrous and non-ferrous metals. High-performance gas flow control is a key requirement for achieving high cutting performance with CO2 lasers. Gas flow control plays an important role for mixing key gases at a number of locations with a CO2 laser: Beam Generation: The gas mixture used as the emitting medium usually consists of CO2, He and N2. Most laser manufacturers specify a minimum required purity for the beam generation gas mixture, which is typically > 99.99%. A highly-accurate gas mixing control is therefore necessary, either for production of pre-mixed gas cylinders, or for in-situ mixing within the laser unit.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Marine envrionmental solutions for oil & gas industry

    Fugro EMU Limited provides turn-key marine environmental services to major oil and gas providers in the UK and overseas by combining its multi-disciplinary capabilities in environmental consultancy, ecology, geophysical and metocean survey, geology and laboratories with its fleet of dedicated offshore vessel services. Fugro EMU vessels enable its consultant teams to deliver project specific needs from exploration through to development and decommissioning in addition to oil spill contingency planning. This includes all aspects of environmental operations and maintenance requirements in UK and overseas coastal and offshore territories. Recent mergers have seen Fugro EMU develop and grow as a company and has continued to support the fundamental belief in the importance of health, safety and welfare. Fugro EMU prides itself on conforming to the stringent standards expected by the oil and gas industry.

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • Nitrogen Generator Specialty Beverage Systems

    The importance of the right nitrogen generation system for beverage storage, CO2 mixing, transporting, and dispensing to your end users can’t be overstated. That’s why it is critical to work with the right company to supply you with the best nitrogen generation beverage system in the industry, and that’s Gas Control Systems.

    By Gas Control Systems, Inc (GCS) based in Sparta, MICHIGAN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you