Industrial Gas Monitoring Equipment For Monitoring And Testing Available In Quebec
-
ShowcaseManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® In-line flow meter you have the perfect tool for measuring consumption of machines, cost allocation and pressure loss monitoring. The unique design makes this flow meter especially suited for smaller diameters. It is built for small pipes up to ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Integrated pressure monitoring for leak control. Special features: Complete realisation, ranging from the design to the commissioning. Piping systems can be realized in various materials, e.g. in copper or stainless steel. Integration into existing fabrication hall construction is possible. Use of gastight DILO unions without intermediate seal compound. Production in nominal diameters of up to ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope M is a 4-in-1 insertion flow meter for compressed air and technical gases. It can be installed under pressure and measures bi-directional flow, pressure, temperature, totalized flow simultaneously. The VPFlowScope M is the next step in gas measurement. You are industry 4.0 ready, with the additional Ethernet output. With the VPFlowScope M re-calibration is history: simply exchange ...
-
Manufactured by AMETEK MOCONbased in USA
The PetroAlert 9100 incorporates the sensitivity, stability, linearity and selectivity of a flame ionization detector (FID), making it the ideal choice for the analysis of aliphatic hydrocarbons. The instrument is designed specifically for the oil and gas industry’s surface logging process. Fast C1 to C5 analysis is completed in 30 seconds, preserving the C1-C2 separation at >200:1 ...
-
Manufactured by ADEV SRLbased in ITALY
Rugged Zirconia analyser for ppm or % Oxygen measurements in combustion & inert gas. The instrument features a special Zirconium Oxide sensor with reference to the solid state (micro-pod technology) eliminating the need for a reference air flow. The weatherproof and explosion proof 8864 is designed for field installation in the most severe conditions, minimizing the sample conditioning ...
-
based in USA
The Model MGT14 is a stand-alone fixed gas detector for continuous industrial gas monitoring applications in non-hazardous areas where there is no risk of potentially explosive gases being present. The detectors can be powered from either a mains power supply of between 85 and 265VAC or a DC power supply of between 9 and ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
Gasboard-2200 UV-DOAS NOx gas bench adopts high-precision ultraviolet differential absorption spectroscopy gas analysis technology to measure NO & NO2 simultaneously. It’s widely used by gas analyzers and PEMS manufacturers due to its flexible integration, high quality and easy ...
-
Manufactured by Focused Photonics Inc. (FPI)based in CHINA
FPI AQMS-650 measures NH3 in the ambient air, which delivers a stable and precise value. It adopts chemiluminescence technology with an external converter that can combine its use with AQMS-600 measuring NOx; during the measurement, NH3 will be converted into NO by oxidation. And it also comes with its own developed software. The remote PC software allows for a remote connection with a virtual ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
Gasboard-2100 micro flow NDIR NO gas bench adopts independent intellectual property rights and international PCT patent (PCT/CN2018100767) dual-chamber sensor technology. The gas chamber is composed of measured gas chamber and reference gas chambe, this design has great capacity to solve environmental temperature instability and electronic components aging issues. It is very suitable for low ...
-
Manufactured by Pietro Fiorentini S.p.A.based in ITALY
Aperflux 101 is pilot controlled pressure regulator for medium and high pressure. Aperflux is a 'fail to open' regulator i.e. it opens in following conditions: failure of main diaphragm; failure of pilot diaphragm/s; failure of pilot seat valve; lack of feeding to the pilot loop. These regulators are siuitable for use with previously filtered, non corrosive ...
-
Manufactured by Teledyne Hastings Instrumentsbased in USA
The HFM-305/HFC-307 is Teledyne Hastings' fast response series of mass flow meters and controllers. Featuring reliability and stability, the 300 Series is chosen for its fast response under a wide range of ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9000 Hydrocarbon Analyzer is a microprocessor-based instrument designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. The analyzer can be purchased in a variety of configurations with internal components for single or multi-point sampling (with or without a sample pump) for pre-filtered non-condensing ...
-
Manufactured by ADEV SRLbased in ITALY
Rugged Zirconia analyser for ppm or % Oxygen measurements in combustion & inert gas. The 8870 is an extractive Zirconia Oxygen analyser that is typically employed for O2 trace measurements in pure gases (typical in technical gas production industry) or in heavy duty applications thanks to an extremely rugged ...
-
Manufactured by HYPER VALVES PVT. LTD.based in INDIA
Size: 1/2” to 6” Rating: 150# to 300# Max. set Pressure: 1 to 5 Kg/cm2, 5 to 15Kg/cm2, 15 to 25Kg/cm2 Max. Temperature Range: 40 Deg C To 100 Deg C Applicable Media: Steam, Air, Gas, Liquid Material: WCB, CF8, CF8M, CF3, CF3M, Duplex ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9000 MNME uses a flame ionization detector (FID) in conjunction with an oxidation catalyst switched in and out of the sample stream. The catalyst oxidizes all hydrocarbons except methane to produce a methane only measurement. This catalytic reaction relies on the presence of oxygen (O2) in the sample. The methane value is then subtracted from the total hydrocarbon concentration to ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9000 TCA Total Carbon Analyzer is a microprocessor-based instrument designed to measure total hydrocarbon content as well as provide a combined carbon monoxide (CO) and carbon dioxide (CO2) reading for impurity detection at industrial and specialty gas companies. Detection limits down to < 0.1 ppm. User-programmable ranges from 1 ppm to 100 ppm are factory-configured per the ...
-
Manufactured by Forensics Detectorsbased in USA
A basic 4 gas monitor by FORENSICS with simple functions that incorporates high-quality sensors. Large LCD and with backlight. Robust for industrial use by utility workers, refinery workers, firefighters, maintenance engineers, and those who spend time in sewers and waterworks, underground storage tanks, oil rigs, tanks, and silos in the maritime industry. Multi-gas monitors are essential for ...
-
Manufactured by Aerionics, Inc.based in USA
The TXP-WTA can be configured in single or dual sensor configurations to allow redundant readings for critical operations or monitoring combination gases. The TXP-WTA’s smart sensors allow changing sensor types quite easily. (Aluminum and Poly Black Enclosures ...
-
Manufactured by Airwave Electronics Ltd.based in CANADA
The Model 4001 System Controllers provide concentration display, alarm activation, and power supply functions for field mounted gas sensing devices. The system controller works in conjunction with any 4 – 20 mA Sensing Head for monitoring a wide variety of toxic and combustible gases. The two user adjustable alarm levels for each channel permits you to set the activation points to conform ...
-
Manufactured by KNF Neuberger GmbHbased in GERMANY
Diaphragm Liquid pumps combine maximum performance with minimum size. The use of chemically resistant materials enables the pumps to convey virtually any type of liquid, whether neutral or corrosive. They are dry-running, self-priming, maintenance free, and available with many different motor- and hydraulic connection ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you