Industrial Inspections Applications

26 Results found
Only show results in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Industrial Inspections ×

Video Inspection of Drilled Shafts, Piers, Caissons

by Allegheny Instruments, Inc.     based in Williamsville, VIRGINIA (USA)

Allegheny Instrument's GeoVISION borehole video camera inspection systems are used to visually inspect drilled shafts, caissons, piers. Downward view, side view, and pan and tilt options.

Gas Monitoring and Leak Detection in Underwater Application for the Offshore Oil and Gas

by Franatech GmbH     based in Lüneburg, GERMANY

With over 300 sensors and systems sold world-wide and over 35 scientific users publications, Franatech is market leader for underwater methane detection and monitoring. Franatech is a developer and supplier of sensors for detection of gases in water. The company has more than 15 years experience in subsea applications, working with all kinds of sensing technologies. Coming from a scientific environment and further engaged in long term co-operation with universities and institutions, the company has been involved in several oil and gas projects, piloting the use of point sensors for continuous monitoring of gas leakages.

Construction Xray Inspection

by Geomorph Instruments     based in Piraeus, GREECE

A non destructive test for concrete plays a central role in determining the quality of cement casting. Bubbles and sediment in the cement weaken the construction considerably. NDT testing equipment is also used in construction to determine the quality of the wired foundations. One of the challenges of construction NDT is the possible difficulty in reaching testing locations. A non destructive test for concrete conducted with a portable digital radiography system provides an excellent inspection tool. Combining mobility with phenomenal penetration capabilities and the highest quality digital radiology imaging, Our portable X-ray inspection systems provide a comprehensive solution to construction NDT technicians.

Inspection Equipment for the Process Industry

by Inspectahire Instrument Company Ltd.     based in Aberdeen, UNITED KINGDOM

Safety and cost are two of the biggest concerns in industry today. At Inspectahire we realise this and aim to minimise the effect of them both. We do this by using the latest inspection technology which can either be operated remotely or if the requirements allow, by man.

In-process and preshipment inspection, testing and expediting of mechanical and electrical equipment for the hydropower industry

by Inspecteam Hydro     based in Godstone, UNITED KINGDOM

INSPECTEAM Hydro performs the surveillance of your suppliers on your behalf by offering inspection and expediting services across Europe. Such as supervision, in-process and preshipment inspection and testing and expediting of mechanical and electrical equipment for the Hydropower industry. INSPECTEAM Hydro’s scope of work is to ascertain that products and materials meet the contract requirements, by ensuring that they conform to the design and standards specified by our clients in the purchase order and in the other contractual agreements. We have a team of qualified engineers and quality/NDT inspectors, experts in the energy sector and especially in the hydropower and water resources industry. Our team is subject to a continuous training program and offers our clients the highest technical competence and professional skill.

Industrial Weighing - Validation

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Challenged by computerized system validation. The consumer should have access to safe medications, medical devices and services through processes that are understood and controlled, and therefore reproducible. These claims are contained in healthcare regulations and laws worldwide.

Inspection of flow measuring equipment for hydraulic inspection

by NIVUS GmbH     based in Eppingen, GERMANY

Definition of Task: Metrologic inspection of flow measuring equipment according to German self-control ordination (EKVO). Inspection of flow measurement at relevant discharge point according to German regulations.

Tunnel Structural Health Monitoring Systems

by Roctest - part of Nova Metrix LLC     based in Saint-Lambert, QUEBEC (CANADA)

Structural Health Monitoring allows rapid assessment of a tunnel’s state of health and such approach is becoming recognized as an appropriate mean to increase the safety and optimize operational and maintenance activities of tunnels. Data resulting from the monitoring program is used to improve the operation, the maintenance, the repair and the replacement of the structure based on objective results. Detection of ongoing damages can be used to discriminate deviations from design performance. Malfunctioning tunnels can often have serious consequences. The most severe are failures involving human victims. Even when there is no loss of life, populations suffer if the structure is partially or completely out of service. Learning how a tunnel performs in real conditions will help design better structures for the future. This can lead to cheaper, safer and more durable structures with increased reliability, performance and safety.

Cloud software solutions for hospitals

by Titan Cloud Software Company, LLC     based in Brentwood, TENNESSEE (USA)

You simply can`t afford a stinging environmental rebuke from the EPA or your state regulatory agency. Not only can fines be expensive, the reputational costs are inexcusable. You`ve invested far too much building trust in your community to take such a risk. The new proposed EPA regulations mean every facility that stores fuel must conform to a higher standard of due diligence. Failure to do so can mean heavy fines, increased liability, and deep brand damage. These new regulations augment and put teeth into the Energy Policy Act of 2005, which now expands to encompass all facilities that store fuel. Compliance requires monthly visual inspections and very specific record-keeping practices, best managed on a secure cloud solution. Titan cloud software keeps hospitals and related facilities on the high road, above the risks of regulatory non-compliance. It is the leading environmental compliance management software in the industry, currently managing over 60,000 USTs (Underground Storage Tanks), as well as thousands of ASTs (Above Ground Storage Tanks). Simply subscribe to Titan, and you`re well on your way to maintaining 100% compliance.

NDT Inspections for Petroleum Retail

by Inspectahire Instrument Company Ltd.     based in Aberdeen, UNITED KINGDOM

Safety and cost are two of the biggest concerns in industry today. At Inspectahire we realise this and aim to minimise the effect of them both. We do this by using the latest inspection technology which can either be operated remotely or if the requirements allow, by man.

Powerline - Commline Inspection

by Geomorph Instruments     based in Piraeus, GREECE

Radiographic NDT testing of a power line is no simple matter. The power line`s electric cables need to be inspected for wear and tear as a routine procedure. Elevating the radiographic NDT equipment to the necessary heights presents a serious problem. Our digital portable radiography systems combine high mobility with cutting edge X-ray technology. Highest quality images are created upon request and are immediately available on screen for analysis. The excellent resolution and dynamic range combined with advanced but user-friendly software are the key to the comprehensive field radiographic NDT solution that we offer.

RailScan

by Geomorph Instruments     based in Piraeus, GREECE

Ground Penetrating Radar to Evaluate Rail Ballast, Sub-ballast and Sub-grade. Railroad maintenance and service providers have traditionally relied on visual inspection and excavation to assess ballast condition and measure sub-ballast and sub-grade. Ground penetrating radar is used to indicate ballast fouling and accurately measure the structural layers to a higher precision and in far less time than with traditional methods.

Casting Inspection

by Geomorph Instruments     based in Piraeus, GREECE

Non destructive test methods are highly effective in the detection of casting defects which are not always visible on the surface. X-ray is a well-known tool for casting quality control. Digital radiography technology takes these tests to the next level. Excellent resolution and dynamic range enable NDT technicians to see the smallest bubbles and the tiniest of cracks. Non destructive test methods employing portable Digital Radiography systems can serve as an efficient solution in facilities that require both laboratory and onsite inspection.

Remote visual inspections for the Oil & Gas Industry

by Inspectahire Instrument Company Ltd.     based in Aberdeen, UNITED KINGDOM

Safety and cost are two of the biggest concerns in industry today. At Inspectahire we realise this and aim to minimise the effect of them both. We do this by using the latest inspection technology which can either be operated remotely or if the requirements allow, by man.

Video Inspection of Monitoring Wells

by Allegheny Instruments, Inc.     based in Monterey, VIRGINIA (USA)

GeoVISION borehole video camera systems are used to visually inspect monitoring wells.

StructureScan

by Geomorph Instruments     based in Piraeus, GREECE

Cutting and coring experts and construction professionals require a reliable, non-destructive means to locate targets within concrete structures prior to drilling, cutting or coring. The industry’s widest range of concrete inspection antennas ensures that StructureScan is optimized for one`s particular application. StructureScan is the tool of choice of concrete professionals based on ease of use, field-proven durability, and accuracy for locating rebar, post-tension cables and conduits.

Inspection equipment for physical asset maintenance

by Inspectahire Instrument Company Ltd.     based in Aberdeen, UNITED KINGDOM

Safety and cost are two of the biggest concerns in industry today. At Inspectahire we realise this and aim to minimise the effect of them both. We do this by using the latest inspection technology which can either be operated remotely or if the requirements allow, by man.

Industrial Weighing - Product Inspection - Contaminant Detection

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

It is important to consider the type of likely contaminants, characteristics of the packaging used and the critical control points within production and packaging process to select the most appropriate contamination detection technology.

Inspection of throttle equipment for hydraulic inspection

by NIVUS GmbH     based in Eppingen, GERMANY

Definition of Task: Metrologic inspection of throttle equipment according to German self-control ordination (EKVO). Verification of approved pipe volume of Q = 10 l/s (readings must not vary by more than 20 % from reference value).

Need help finding the right suppliers?

Let the XPRTs do the work for you