Only show results in Massachusetts? Ok

Infrared (IR) Gas Detection Applications

  • Premium

    Gas Detection and Analysis Equipment for Chemical and Petrochemical

    In a complex petrochemical facility there may be many thousands of potential leaks paths. Some may be leaking but most will not. Using an infrared Gas Detection camera allows the user to examine many potential leaks sources in a short time and from a distance. The EPA acknowledged gas imaging cameras, such as Opgal’s EyeCGas®, as an approved Leak Detection and Repair (LDAR) Method 21 alternate work practice (AWP).

    By EyeCGas -OGI by OPGAL based in Karmiel, ISRAEL.

  • Premium

    Gas Detection and Analysis Equipment for Oil and Gas Industry

    The Oil & Gas segment is the biggest market for gas detection and analysis equipment. It is common to describe this industry based on the product flow, from “Upstream” exploration and extraction location toward a “Downstream” flow, which end up at the end user home or business. Throughout the Oil and Gas industry, leaks are a real concern.

    By EyeCGas -OGI by OPGAL based in Karmiel, ISRAEL.

  • Premium

    Gas monitoring instruments and systems for fumigation

    Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for HAZMAT

    Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ DX4040 portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or less.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Cement industry online monitoring solutions

    Dust, SO2, NOx, CO, CO2 and other gases generated in the fuel decomposition, combustion and other production processes of cement industry have a serious impact on the atmospheric environment. So it is essential to check the content of these gases for energy conservation, increase productivity, reduce energy consumption and protect the safety of life and production. The company`s gas analysis technology can accurately and reliably measure various industrial gas content, to provide a complete gas analysis solutions...

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Temperature and gas sensing solutions products for indoor environments

    Employ superior trace gas monitoring solutions for your most demanding indoor air quality challenges. Indoor environment monitoring spreads across multiple scientific fields and activity sectors. If you`re a researcher, specialized consultant, equipment manufacturer, or building developer, indoor environment monitoring is critical to ensure optimal safety, operation, and testing conditions. Advanced Energy delivers leading-ege gas detection and measurement solutions that are ideal for building science, field...

    By LumaSense Technologies, Inc., An Advanced Energy Company based in Milpitas, CALIFORNIA (USA).

  • Premium

    Gas Leak Detection for the Gas Industry

    Sewerin gas detection instruments are used to identify and quantify gas leaks in natural gas distribution networks. Designed to be intuitive to use for many different tasks in the gas utility industry the infrared sensors ensure accuracy and sensitivity. Our equipment is used in many countries by all the world`s major gas supply companies.

    By Hermann Sewerin GmbH based in G├╝tersloh, GERMANY.

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings,...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN DIESEL FUEL OR DOMESTIC HEATING FUEL BY MID-IR SPECTROSCOPY

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Infrared Sources for Anesthesia Monitoring

    Anesthesia agent monitoring identifies and quantifies the anesthesia. This is done by using infrared absorption techniques to control the phases of the anesthesia. Therefore several gases have to be measured at once – online, accurately and reliably.

    By Axetris AG based in Kaegiswil, SWITZERLAND.

  • Gas Sensing for Horticulture

    Controlled Environment Horticulture is a vast topic, and has been utilised in varying forms for centuries. Excavations of the city of Pompeii showed remains of early greenhouses dating back to AD79; and the modern greenhouses are thought to originate in the thirteenth century in Italy. Most people recognise the use of greenhouses for growing flowers and vegetables, whether in their own garden, at garden centres or on a commercial basis. Indeed most people will be conversant with irrigation systems that are used...

    By Edinburgh Sensors Ltd - a division of Edinburgh Instruments based in Livingston, UNITED KINGDOM.

  • Air emissions solutions for leak detection and repair sector

    Many industries involve the usage or dismissal of gases as part of its daily routines. Leaks of Green House Gases (GHG) from process and transport systems in these industries contribute to global warming, expose employees to health hazards and risk of explosion, and represent enormous economic losses for the companies involved. “EyeCGas” – Opgal’s innovative infrared gas imaging camera enables the quick and safe detection and visualization of these gasses.

    By Online Safety Services (Europe) Ltd based in Staffordshire, UNITED KINGDOM.

  • Methane Sensing for Coal Mining

    Application: The majority (around 60%) of the coal seams currently being extracted worldwide are so far underground that open cast mining cannot take place and, therefore, underground mining techniques need to be used. Consequently, workers have to enter and work in confined spaces. One of the major problems that this creates is the dangers from Methane (CH4) gas which occurs in Mine gas.

    By Edinburgh Sensors Ltd - a division of Edinburgh Instruments based in Livingston, UNITED KINGDOM.

  • High quality gas sensor solutions for process control

    Gas monitors controlling heat treatment of metals. Endothermic process and heat treatments are essential for ensuring high-quality metal and alloy products. Heat treatments are commonly used to alter the physical or chemical properties of materials such as metals and alloys, including steel. Heat treatments result in changes in material microstructures that provide increased hardness, temperature resistance, ductility, and strength.

    By Edinburgh Sensors Ltd - a division of Edinburgh Instruments based in Livingston, UNITED KINGDOM.

  • Measurement solution for FTIR Vs. GC in gas analysis

    Comparison of TechnologiesA gas chromatograph (GC) has traditionally been the technology of choice for laboratory analysis of gas samples. GCs have been used for over 50 years in the qualification and quantification of complex mixtures of gases. The techniques and methodology required to run GCs are often a pre-requisite for any laboratory technician. Recent developments in Fourier Transform Infra-Red (FTIR) gas analysis has enabled this technology to start to replace GCs in the lab.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you