Infrared (IR) Gas Detection Equipment For Monitoring And Testing
-
ShowcaseManufactured by Galaxy Scientific Incbased in USA
The QuasIR 3000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Rapid, nondestructive analyses of tablets, capsules and other solid-state dosage forms. The NIRS XDS MasterLab Analyzer enables the rapid, nondestructive analyses of solid-state dosage forms such as tablets, capsules, film-coated tablets, gel tablets and gel capsules for manufacturers in the pharmaceuticals industry. Solids in vials can also be analyzed with the NIRS XDS MasterLab Analyzer. The ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm NIRS lab analyzers enable you to perform routine analysis quickly and with confidence – without requiring sample preparation or additional reagents and yielding results in less than a minute. Combining visible (Vis) and near-infrared (NIR) spectroscopy, these analyzers are capable of performing qualitative analysis of various materials and quantitative analysis of a number of ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6500 and 6520 gas analyzers offer unparalleled accuracy and performance via simplified design and implementation. Unlike analyzers that require moving components, the 6500 and 6520 use pulsed-infrared sources to achieve high accuracy and reliability. Highly accurate calibration. High stability and rapid warm-up. Unique optical architecture. Comprehensive software ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CO analyzer adopts non-dispersive infrared spectrum and combines with advanced microprocessor technology. It provides accurate and reliable detection of CO at ppm level to meet the requirement of ambient gas monitoring.The principle is non-dispersive infrared based on gas filter correlation technology. CO molecule absorbs specific infrared light which is consistent with Beer-Lambert principle. CO ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS Analyzer Pro is a single point process analysis system based on high resolution diode array technology. It provides non-destructive analysis of solids, granules, or powders through a glass window directly in the process line without bypass - a true inline ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by ...
-
PremiumManufactured by ENVEAbased in FRANCE
Eco-designed, ultra-compact, smart & connected instrument, the MIR 9000e is your next tool to measure combustion exhaust gas from boiler, or gas from different industrial furnaces and process applications. It offers superior metrological performances for the simultaneous multi-gas measurement of: NOx, SO2, CO, O2, residual H2O, CO2, CH4 and N2O (greenhouse gases). ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Robust near-infrared spectroscopy for quality control of polymers, not only in laboratories, but also in production environments. The NIRS DS2500 Polymer Analyzer is the tried and tested, flexible solution for quality control and routine analysis of PE, PP, PET, polyamide, and other polymers in solid form along the entire production chain. Resistant to dust, moisture, vibrations, and temperature ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application Teledyne Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these detectors are available in explosion safe or intrinsically safe ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Robust near-infrared spectroscopy for quality control, not only in laboratories but also in production environments. The DS2500 Liquid Analyzer is the tried and tested, flexible solution for routine analysis of liquids along the entire production chain. Its robust design makes the DS2500 Liquid Analyzer resistant to dust, moisture and vibrations, which means that it is eminently suited for use in ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Robust, near-infrared spectroscopy for quality control of polyols, not only in laboratories, but also in production environments. The NIRS DS2500 Polyol Analyzer is the tried and tested, flexible solution for quality control and routine analysis of polyols and is compliant with the standards ASTM D6342-12 and ISO 15063:2011. Its robust design makes the NIRS DS2500 Polyol Analyzer resistant to ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
AMETEK Land, Land Instruments International Ltd, formally announces that from the 30th September 2019 the Model 9100 Cross-stack Carbon Monoxide (CO) Monitor will be discontinued from new product ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The CO2-EN Gas Detection Carbon Dioxide Monitor Controller is designed to provide HVAC systems with economical means of controlling outdoor makeup air to maintain indoor air quality and reduce the cost of heating or cooling the building environment. The CO2-EN is used for ambient monitoring in commercial and light industrial environments. Air samples originate at the remote sampling head, which ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 8050 pCO, Measuring System is an autonomous analytical system for measuring carbon dioxide in oceanic surface water. The system is modeled after instruments previously built by Craig Neill/University of Bergen. The system may be used on a ship underway or, on a variety of at -sea platforms. The present pC02 system operates fully ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Robust measuring system for monitoring the reactions of liquids in the technical center and pilot plants. The NIRS XDS Transmission OptiProbe Analyzer enables efficient determination of the composition of aqueous products, clear liquids, solvents, and viscous samples. The instrument is equally suitable for use in technical centers or for at-line applications when upscaling production processes. ...
-
PremiumManufactured by Galaxy Scientific Incbased in USA
Galaxy Scientific’s QuasIR 2000E process FT-NIR analyzer is designed for continuous measurement of the chemical composition of material transported on a conveyor belt, through a pipe, or in a chute. Our unique external projection optics use high powered tungsten lamps to illuminate the sample from as far as 30 inches away and collect the scattered reflection off the sample through a fiber ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Monitoring lubricant condition in machine wear when and where it is needed significantly reduces the time required for laboratory analysis and improves machine reliability. Spectro Scientific offers a wide range of portable devices with field simplicity and lab accuracy. The product combinations are powerful for different applications as together they provide more comprehensive analysis of oil ...
-
PremiumManufactured by ENVEAbased in FRANCE
A complete “all in one compact” system, for multi-gas measurements, based on the field-proven MIR 9000 analyzer and on-board SEC sampling ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Best combination for IR-active components and oxygen. The ULTRAMAT/OXYMAT 6 combines the features of the ULTRAMAT 6 and the OXYMAT 6 in one 19" analyzer. Most frequently used for demanding applications, the ULTRAMAT/OXYMAT 6 must meet high standards with regard to reliability and measurement quality. This is guaranteed by state-of-the-art electronics, ease of operation, and a physical element ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you