Infrared Microscopy Equipment For Monitoring And Testing Available In Nicaragua
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
Micro-Compression Transmission spectroscopy Cell: The Specac Micro Compression Cell is intended for soft solid or semi liquid sample analysis by FTIR transmission or infrared microscopy. The cell allows for samples to be compressed and flattened between two non-rotating transmission windows for analysis. It is supplied with a choice of NaCl or KBr windows as standard, but CaF2, BaF2, and ZnSe ...
-
Distributed by Shenzhen Radiusen Systems Limitedbased in CHINA
The MCT (Mercury-Cadmium-Telluride) IR (infrared) Detector Module is a thermoelectrically cooled detector element and preamplifier package optimized for acquiring spectral data with the LaserTune Quantum Cascade Laser (QCL) ...
-
Manufactured by Bruker Corporationbased in USA
The HYPERION is the culmination of more than 25 years of experience in FT-IR microscopy. Its high-quality design, including all optical, mechanical, and electronic components, provides high stability and reliability. Featuring many contrast enhancement tools, a wide variety of dedicated objectives, and chemical imaging, the HYPERION enables you to conduct the most sensitive microanalysis easily ...
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
High-Pressure Solid Transmission spectroscopy cell: Specac’s high-pressure Diamond Compression Cell is designed for in-compartment FTIR spectroscopic transmission analysis and FTIR microscope analysis. Samples are compressed and flattened to a uniform thickness between a pair of diamond windows until the sample is thin enough for the FTIR instrument or microscope beam to penetrate. This ...
-
Manufactured by JASCO Inc.based in USA
With over fifty years of experience in infrared spectroscopy, JASCO offers a series of advanced FT-IR instruments and sampling accessories. JASCO provides the most complete selection of FT-IR capability from education and routine analysis to high performance research systems including optimized dedicated systems for advanced technology applications such as measuring film thickness and CVD in-situ ...
-
Manufactured by Pendar Technologiesbased in USA
This system is based on Pendar’s proprietary monolithic distributed feedback (DFB) quantum cascade laser (QCL) array. The DFB QCL array source is a highly stable, rapidly and continuously wavelength tunable broadband infrared source that can be used for illumination for various spectroscopic applications. Each element of the array is individually addressable and emits at a different ...
-
Manufactured by Advanced Spectral Technology, Inc. (AST)based in USA
Provides similar detection of thermally identifiable defects with the MWIR band (3-5 microns). Equivalent magnifications from Macro to 1x, 2.5x, 4x and 5x. The platform utilizes a benchtop configuration with precision 150mm travel manual coarse and fine positioning X-Y stage enabling navigation and metrology ...
-
Manufactured by JASCO Inc.based in USA
JASCO offers two innovative FT-IR Microscope accessories, the IRT-5000 and IRT-7000, providing several new functions that drastically improve infrared microspectroscopy analyses. Both microscope systems can be easily interfaced with either the FT/IR-4000 or FT/IR-6000 spectrometer, offering the most advanced microscopy and imaging systems available in the market today. Coupling JASCO"s ...
-
Manufactured by Agilent Technologies, Inc.based in USA
The Agilent Cary 610 and Cary 620 FTIR Microscopes and Chemical Imaging systems represent the latest in cutting-edge performance. Leveraging off the latest in technological developments, the systems now deliver unparalleled spatial resolution and sensitivity, which coupled with a wide range of options, provide flexibility to suit applications ranging from routine measurements to cutting-edge ...
-
Manufactured by JASCO Inc.based in USA
In Raman spectrometry, sample preparation is generally considered to be much easier than for infrared spectroscopy and unlike FTIR microscopy, Raman offers greatly improved spatial resolution. As a result, the use of Raman spectrometry is rapidly spreading as the analytical technique of choice for materials analysis. One of the factors which has previously held back the adoption of laser Raman ...
-
Distributed by S.T. Japan USAbased in USA
For ATR measurements the pressure is a very significant issue:Too much pressure and either the sample or the ATR crystal will crack, too little pressure and there is no good contact between the ATR crystal and your sample.With the μ Contact Pressure Monitor you can set an alarm at a specified pressure.So while you gradually increase the pressure to obtain a good ATR spectrum, the alarm will be ...
-
Manufactured by Zolix Instruments CO.,LTDbased in CHINA
Photoluminescence (PL) is the light emission from a material under the excitation by ultraviolet, visible or near infrared radiation. In semiconductor luminescent property measurements, the sample (e.g. GaN, ZnO, GaAs etc.) was usually excited by a laser (with a wavelength of 325 nm, 532 nm, 785 nm etc.), and its PL spectrum is measured to analyze the optical physical properties, such as the band ...
-
Manufactured by Bruker Corporationbased in USA
Best performance for visual inspection and infrared spectral analysis of micro samples with highest comfort in use. Due to the motorization of all moveable components including the ATR-crystal, the LUMOS provides an unmatched high degree of automation. All required changes of hardware settings as well as the complete IR-measurement procedures are performed fully automated – even in ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
The high-end IRTracer-100 Fourier Transform Infrared (FTIR) spectrometer is your answer to the the need for increased speed and accuracy in FTIR spectroscopy. Combining high speed, sensitivity and resolution with enhanced expandability and easy-to-use FTIR software, the IRTracer-100 FTIR spectrometer quickly and easily obtains high-quality FTIR spectra for samples in such fields as ...
-
Manufactured by PIKE Technologiesbased in USA
The μMAX™ is design for IR microanalysis, providing high performance sampling at low-cost with exceptional ease of use. The μMAX fits into the sample compartment of most FTIR spectrometers. The compact, planar optical layout minimizes the pathlength of the IR beam and thereby maximizes IR throughput. This in-compartment infrared microscope may be configured for transmission, ...
-
Distributed by S.T. Japan USAbased in USA
The EZ-Pick Micromanipulator is a versatile and easy-to-use device that converts your microscope from an observational instrument into a practical sample preparation tool. Manual handling of micro samples is often too unsteady while use of joystick controlled micromanipulators can be complex and expensive. The EZ-Pick-tool is ideal for any application where demanding micromanipulation is needed ...
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
Ergonomic infrared microscope: The SurveyIR is a new FTIR Micro-spectroscopy accessory designed to deliver the ultimate user experience for a broad range of microanalysis techniques. The unique ergonomic design allows seamless interaction between operator and instrument. The SurveyIR’s compact configuration and alignment free optical design facilitates simple mounting in the FTIR ...
-
Manufactured by Platypus Technologies, LLCbased in USA
Discover the pristine, ultra-flat gold(111) surfaces from Platypus Technologies, perfect for advanced nanotechnology applications. Our Template-Stripped Gold Chips offer unparalleled flatness, ideal for applications atomic force microscopy (AFM), Scanning Tunneling Microscopy (STM), Infrared Nanospectroscopy (nano-IR) and ...
-
Manufactured by PIKE Technologiesbased in USA
The S84 Microscope Heat Stage is designed for spectroscopic analysis and monitoring of small samples from ambient to 500 °C. For transmission and reflection measurement, the accessory can be located directly on the sampling stages of most FTIR and Raman microscopes. It may also be used for transmission measurements when placed in the sample compartment of the spectrometer. Inert or reaction ...
-
Manufactured by Thermo Fisher Scientificbased in USA
See it fast. Identify it faster. In analytical labs where details matter most—when productivity is measured in microns and minutes—turn to the Thermo Scientific Nicolet RaptIR FTIR Microscope for answers. This research-grade microscope helps you rapidly locate and identify trace materials, inclusions, impurities, microparticles, and the distribution of materials within a sample with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you