Infrared Microscopy Equipment For Monitoring And Testing Available In Georgia (US)
-
Distributed by Shenzhen Radiusen Systems Limitedbased in CHINA
The MCT (Mercury-Cadmium-Telluride) IR (infrared) Detector Module is a thermoelectrically cooled detector element and preamplifier package optimized for acquiring spectral data with the LaserTune Quantum Cascade Laser (QCL) ...
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
Micro-Compression Transmission spectroscopy Cell: The Specac Micro Compression Cell is intended for soft solid or semi liquid sample analysis by FTIR transmission or infrared microscopy. The cell allows for samples to be compressed and flattened between two non-rotating transmission windows for analysis. It is supplied with a choice of NaCl or KBr windows as standard, but CaF2, BaF2, and ZnSe ...
-
Manufactured by Bruker Corporationbased in USA
The HYPERION is the culmination of more than 25 years of experience in FT-IR microscopy. Its high-quality design, including all optical, mechanical, and electronic components, provides high stability and reliability. Featuring many contrast enhancement tools, a wide variety of dedicated objectives, and chemical imaging, the HYPERION enables you to conduct the most sensitive microanalysis easily ...
-
Manufactured by Spectral Systems, LLCbased in USA
Spectral Systems is a world leader in supplying spherical and aspherical custom optics for infrared spectroscopy, infrared imaging, and infrared warning, surveillance, and tracking systems. We use diamond turning and conventional techniques using a variety of infrared reflective and refractive ...
-
Manufactured by Specac Limitedbased in UNITED KINGDOM
High-Pressure Solid Transmission spectroscopy cell: Specac’s high-pressure Diamond Compression Cell is designed for in-compartment FTIR spectroscopic transmission analysis and FTIR microscope analysis. Samples are compressed and flattened to a uniform thickness between a pair of diamond windows until the sample is thin enough for the FTIR instrument or microscope beam to penetrate. This ...
-
Manufactured by Spectral Systems, LLCbased in USA
Spectral Systems is a world leader in supplying spherical and aspherical custom optics for infrared spectroscopy, infrared imaging, and infrared warning, surveillance, and tracking systems. We use diamond turning and conventional techniques using a variety of infrared reflective and refractive ...
-
Manufactured by Photothermal Spectroscopy Corp.based in USA
The world’s first simultaneous IR+Raman microscopy system is a unique dual modality platform with all the advantages of an O-PTIR microscope combined. That is photothermal microscopy via optical photothermal infrared and Raman combined with a visible probe laser for applications in polymers, defect analysis, microplastic detection and red blood cells. Spectra, line scans and 2D maps can now ...
-
Manufactured by JASCO Inc.based in USA
With over fifty years of experience in infrared spectroscopy, JASCO offers a series of advanced FT-IR instruments and sampling accessories. JASCO provides the most complete selection of FT-IR capability from education and routine analysis to high performance research systems including optimized dedicated systems for advanced technology applications such as measuring film thickness and CVD in-situ ...
-
Manufactured by Pendar Technologiesbased in USA
This system is based on Pendar’s proprietary monolithic distributed feedback (DFB) quantum cascade laser (QCL) array. The DFB QCL array source is a highly stable, rapidly and continuously wavelength tunable broadband infrared source that can be used for illumination for various spectroscopic applications. Each element of the array is individually addressable and emits at a different ...
-
Manufactured by Agilent Technologies, Inc.based in USA
The Agilent Cary 610 and Cary 620 FTIR Microscopes and Chemical Imaging systems represent the latest in cutting-edge performance. Leveraging off the latest in technological developments, the systems now deliver unparalleled spatial resolution and sensitivity, which coupled with a wide range of options, provide flexibility to suit applications ranging from routine measurements to cutting-edge ...
-
Manufactured by Bruker Corporationbased in USA
Best performance for visual inspection and infrared spectral analysis of micro samples with highest comfort in use. Due to the motorization of all moveable components including the ATR-crystal, the LUMOS provides an unmatched high degree of automation. All required changes of hardware settings as well as the complete IR-measurement procedures are performed fully automated – even in ...
-
Distributed by S.T. Japan USAbased in USA
For ATR measurements the pressure is a very significant issue:Too much pressure and either the sample or the ATR crystal will crack, too little pressure and there is no good contact between the ATR crystal and your sample.With the μ Contact Pressure Monitor you can set an alarm at a specified pressure.So while you gradually increase the pressure to obtain a good ATR spectrum, the alarm will be ...
-
Manufactured by Zolix Instruments CO.,LTDbased in CHINA
Photoluminescence (PL) is the light emission from a material under the excitation by ultraviolet, visible or near infrared radiation. In semiconductor luminescent property measurements, the sample (e.g. GaN, ZnO, GaAs etc.) was usually excited by a laser (with a wavelength of 325 nm, 532 nm, 785 nm etc.), and its PL spectrum is measured to analyze the optical physical properties, such as the band ...
-
Manufactured by Photothermal Spectroscopy Corp.based in USA
The use of O-PTIR submicron visible probe with no contact to detect the photothermal IR effect is the key breakthrough. It enables non-contact, submicron IR spectroscopy in reflection mode. This provides new analytical capabilities to analyze polymers, live single cells, particulates and ...
-
Manufactured by Advanced Spectral Technology, Inc. (AST)based in USA
Provides similar detection of thermally identifiable defects with the MWIR band (3-5 microns). Equivalent magnifications from Macro to 1x, 2.5x, 4x and 5x. The platform utilizes a benchtop configuration with precision 150mm travel manual coarse and fine positioning X-Y stage enabling navigation and metrology ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
The high-end IRTracer-100 Fourier Transform Infrared (FTIR) spectrometer is your answer to the the need for increased speed and accuracy in FTIR spectroscopy. Combining high speed, sensitivity and resolution with enhanced expandability and easy-to-use FTIR software, the IRTracer-100 FTIR spectrometer quickly and easily obtains high-quality FTIR spectra for samples in such fields as ...
-
Manufactured by JASCO Inc.based in USA
In Raman spectrometry, sample preparation is generally considered to be much easier than for infrared spectroscopy and unlike FTIR microscopy, Raman offers greatly improved spatial resolution. As a result, the use of Raman spectrometry is rapidly spreading as the analytical technique of choice for materials analysis. One of the factors which has previously held back the adoption of laser Raman ...
-
Manufactured by JASCO Inc.based in USA
JASCO offers two innovative FT-IR Microscope accessories, the IRT-5000 and IRT-7000, providing several new functions that drastically improve infrared microspectroscopy analyses. Both microscope systems can be easily interfaced with either the FT/IR-4000 or FT/IR-6000 spectrometer, offering the most advanced microscopy and imaging systems available in the market today. Coupling JASCO"s ...
-
Manufactured by Chromacity Ltd.based in UNITED KINGDOM
Chromacity’s 1280 nm laser generates femtosecond pulses, with a fiber delivery output, to drive advances in test and measurement applications within the semiconductor industry. While operating at 1280 nm, Chromacity’s ultrafast laser can also generate 80 fs pulses across the 1250 nm – 1310 nm wavelength range, and combined with excellent beam quality, the Chromacity 1280 has ...
-
Manufactured by Ostec Corporate Groupbased in RUSSIA
IROS 05 FTIR spectrometer is designed to provide a wide range of sample measurement techniques in the most challenging environments, from the scientific laboratory to the industrial production line. Compact size, reasonable price, a unique set of accessories and high performance – these advantages of IROS 05 spectrometer allow it to fit the most of research and field tasks as a mid-level ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you