Inspection Systems Applications

14 Results found
Only show results in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Inspection Systems ×

Video Inspection of Drilled Shafts, Piers, Caissons

by Allegheny Instruments, Inc.     based in Williamsville, VIRGINIA (USA)

Allegheny Instrument's GeoVISION borehole video camera inspection systems are used to visually inspect drilled shafts, caissons, piers. Downward view, side view, and pan and tilt options.

Construction Xray Inspection

by Geomorph Instruments     based in Piraeus, GREECE

A non destructive test for concrete plays a central role in determining the quality of cement casting. Bubbles and sediment in the cement weaken the construction considerably. NDT testing equipment is also used in construction to determine the quality of the wired foundations. One of the challenges of construction NDT is the possible difficulty in reaching testing locations. A non destructive test for concrete conducted with a portable digital radiography system provides an excellent inspection tool. Combining mobility with phenomenal penetration capabilities and the highest quality digital radiology imaging, Our portable X-ray inspection systems provide a comprehensive solution to construction NDT technicians.

Powerline - Commline Inspection

by Geomorph Instruments     based in Piraeus, GREECE

Radiographic NDT testing of a power line is no simple matter. The power line`s electric cables need to be inspected for wear and tear as a routine procedure. Elevating the radiographic NDT equipment to the necessary heights presents a serious problem. Our digital portable radiography systems combine high mobility with cutting edge X-ray technology. Highest quality images are created upon request and are immediately available on screen for analysis. The excellent resolution and dynamic range combined with advanced but user-friendly software are the key to the comprehensive field radiographic NDT solution that we offer.

Casting Inspection

by Geomorph Instruments     based in Piraeus, GREECE

Non destructive test methods are highly effective in the detection of casting defects which are not always visible on the surface. X-ray is a well-known tool for casting quality control. Digital radiography technology takes these tests to the next level. Excellent resolution and dynamic range enable NDT technicians to see the smallest bubbles and the tiniest of cracks. Non destructive test methods employing portable Digital Radiography systems can serve as an efficient solution in facilities that require both laboratory and onsite inspection.

Remote visual inspections for the Oil & Gas Industry

by Inspectahire Instrument Company Ltd.     based in Aberdeen, UNITED KINGDOM

Safety and cost are two of the biggest concerns in industry today. At Inspectahire we realise this and aim to minimise the effect of them both. We do this by using the latest inspection technology which can either be operated remotely or if the requirements allow, by man.

Video Inspection of Monitoring Wells

by Allegheny Instruments, Inc.     based in Monterey, VIRGINIA (USA)

GeoVISION borehole video camera systems are used to visually inspect monitoring wells.

Smoke generator devices for lev testing, spray booth clearance testing & air testing

by Concept Smoke Systems     based in Maidenhead, UNITED KINGDOM

For many years, materials containing isocyanate have been the single biggest cause of occupational asthma in the UK. Vehicle paint sprayers are 80 times more likely to develop occupational asthma than workers in other industries. This is caused by the inhalation of the fine paint mist that is generated when paint spraying. There is a requirement for the measurement and display of `clearance times` for spray booths / rooms set by the HSE and the Motor Vehicle Repair (MVR) to meet the requirements of Control of Substances Hazardous to Health (COSHH).

Transportation

by PBS Velká Bíteš, a.s.     based in Velká Bíteš, CZECH REPUBLIC

We are among the main European suppliers of turbochargers for goods vehicles, locomotives, ships and partially also for cars. We specialize in precision castings of wheels, blades and other turbocharger components as well as their subsequent precision machining. We benefit from the latest technologies in precision casting employed by our Precision Casting Division in the Czech Republic as well as many years of experience. PBS Velká Bíteš has produced turbochargers since 1954. Gradually we began to focus on the production and machining of the technologically demanding turbocharger rotors and guide wheels and blades, including final grinding. Today, we are among the technological leaders in the industry. Our products are subjected to extensive quality testing. Quality Management System according to ISO 9001 is fully implemented in our production process.

Industrial Weighing - Product Inspection - Contaminant Detection

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

It is important to consider the type of likely contaminants, characteristics of the packaging used and the critical control points within production and packaging process to select the most appropriate contamination detection technology.

Taxiway Inspection

by Geomorph Instruments     based in Piraeus, GREECE

RoadScan system uses air-launched horn antennas, providing a method for data collection at highway speeds and eliminating the need for lane closures. It is now possible for transportation professionals to collect hundreds of miles of pavement layer thickness data in just one day.

Dams and Dikes Structural Health Monitoring Systems

by Roctest - part of Nova Metrix LLC     based in Saint-Lambert, QUEBEC (CANADA)

The control of a dam requires a wide range of important information coming from the sensors, which are of vital importance for the life of a dam. Engineers in charge can take specific and sudden decisions for a correct control of a dam`s reservoir, body and foundations. However, monitoring is not only carried out by sensors, but it also involves direct or remote visual inspection as well as topographical measuring.

Drill pipe cleaning

by NLB Corp.     based in Wixom, MICHIGAN (USA)

Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling fluids.

Custom Built Solvent Recycling Solutions for Special Industrial Projects

by International Surface Technologies     based in Laval, QUEBEC (CANADA)

We make a large variety of recyclers for solvents and cleaners, as well as custom, automated surface-treatment systems. We are specialists – from continuous-operation machine design to integration of components.

Automated solutions for the sewer pipeline dredging - sewer dredge

by Liquid Waste Technology LLC (LWT LLC)     based in New Richmond, WISCONSIN (USA)

LWT’s Robotic Crawler Dredge can be used for underwater dredging applications, such as sewer pipeline dredging and tank cleanout. Models are available in electric driven pump and hydraulic driven pump versions, depending on the application.

Need help finding the right suppliers?

Let the XPRTs do the work for you