Interface Detection (Interface Detection ) Equipment
-
Manufactured by ABM Sensor Technologybased in CANADA
The R-ID pulse radar sensor from ABM is the ideal solution for oil-water interface detection in challenging applications with temperature variations, extreme temperatures, vapours or acoustic noise. The non-contact radar sensor provides continuous interface level detection up to 240 ft (73 m) with 4-20 mA output standard and ...
-
Manufactured by Aquilar Ltdbased in UNITED KINGDOM
Monitors all TraceTek sensing cables and AquiTron water, fuel oil and refrigerant gas sensors. Direct BMS interface using MODBUS, Opto-22, or Johnson Controls Metasys protocol. Compact enclosure designed to be clipped directly into a controls cabinet. Can be networked to a TTDM-128 master panel or connected directly to a BMS, PLC and ...
-
Manufactured by Industrial Tomography Systems Ltd. (ITS)based in UNITED KINGDOM
Interface (and level) detection is a basic measurement requirement for many processes. Whilst traditional level detection techniques are available for many applications, certain interfaces present significant measurement challenges. Using patented measurement methods, ITS has developed the LEVEL-ITOMETER, an ECID (electrical ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Trek 646 software-driven electrostatic chuck supply offers versatility and performance for use in multiple ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Trek 645 software-driven electrostatic chuck supply offers versatility and performance for use in multiple ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS SPA6 probe is in cylindrical form, 67mm diameter, and 200mm long. It differs from other STS probes, in that it is a self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 to 15 hours of operation. The probe is ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS 6150ADK probe is a large area probe, 150mm wide, and 200mm long. It differs from other STS probes, in that it is self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 hours of operation. The probe is designed to ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For detection of separation layers and sludge profiles. NivuScope 2 measurement system for reliable separation layer detection and sludge level measurement mainly in primary and secondary ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI Model AS-LLS is a no moving parts, ultra-reliable level switch which detects the presence or absence of liquid or interface at the sensing location. The AS-LLS level switch is directly installed into tanks, reservoirs, sumps and gearboxes on commercial and military aircraft, as well as spacecraft, vehicles and marine applications. The ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Reliably collecting the separated compounds is the ultimate goal of a preparative chromatography application. The Fraction Collector C-660 collects all your samples according to time, volume or peak mode in any type of tubes or ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93S insertion type FlexSwitch for level and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures ...
-
Manufactured by ABM Sensor Technologybased in CANADA
The UMM-LIQ immersion ultrasonic sensor from ABM is the ideal solution for pump control / protection liquid applications and liquid-solid interface detection. The submersible ultrasonic sensor matched to water can be installed bottom up to continuously monitor the height of water above a submersed pump for control and protection. The sensor ...
-
Manufactured by Automation Products Group, Inc. (APG)based in USA
about the True Echo™ PRL is easy. Oil-Water Interface Detector A firmware addition adds Oil-Water Interface detection to the True Echo™ PRL's already versatile ...
-
Manufactured by Delta M Corp.based in USA
be configured with 2 independent outputs, such as level or mass flow with temperature or two mass flow rates. Level response time of .1 to 1 second on wetting, media dependent Flow response time of .5 to 10 seconds, media dependent Can be used for either gas or liquid applications including interface detection. Self heating sensor design improves ...
-
Manufactured by Industrial Tomography Systems Ltd. (ITS)based in UNITED KINGDOM
, bubble columns, and packed beds. Mining Research Package: for slurry monitoring, flotation, and separation. Oil & Gas Research Package: for 2-phase flow, 3-phase flow, interface detection, and ...
-
Manufactured by Hawker Electronics Limitedbased in UNITED KINGDOM
Stand alone probe with built in relay output. Temperature range from -20 deg C to +85 deg C. The LS1 is sensitive at the tip only which makes it suitable in applications where it can be contaminated such as glues, bitumen and clay or in interface applications such as aerated cement powder, oil/ water interface detection or aerated wood ...
-
Manufactured by Shenzhen Sipotek Technology Co., Ltd.based in CHINA
Humanized design of the machine and system, simple mode of operation, friendly user interface. Quickly complete the detection indicators, up to 300-1200 per minute. No other harm will be caused to the product during the testing ...
-
Manufactured by KIONIX, Inc.based in USA
TRI-AXIS, USER SELECTABLE ± 2G, 4G, 8G, 16G, DIGITAL (I²C) INTERFACE AND MOTION DETECTION/WAKE-UP INTERRUPT, 2 X 2 X 0.9 MM LGA - KXTJ3-1057. The KXTJ3 is the next generation of our best-selling KXTJ2 tri-axis accelerometer that provides the best value and high performance available in the same pin-to-pin compatible 2 x 2 x 0.9 mm ...
-
Manufactured by Micropack Detectionbased in USA
The Micropack CCTV Flame Detection System Relay Driver (relay driver) is used to interface CCTV Flame Detection System external devices, such as plant actuators. The relay driver has been designed specifically for the CCTV Flame detection system and is compatible with the CCTV RS485 communications network. MICROPACK no longer ...
-
Manufactured by Siemens - Automation & Drivesbased in UNITED KINGDOM
Pointek CLS500 is an inverse frequency shift capacitance level switch for detecting interfaces, solids, liquids, toxic and aggressive chemicals in critical conditions of high temperature and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you