Isokinetic Sampling Equipment For Monitoring And Testing Available In Michigan
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
When remote and flexible monitoring with no fixed sampling point is needed, the Remote Sampling Isokinetic Sampling Probe (ISP) Kit a I lows for samples to be taken while maintaining the integrity of the measurement. The ISP Kit uses a length of sample tubing to connect the sample point to the impaction plate, and is ideal for minienvironment sampling applications such as RABS, Laminar Flow ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Lubricated Rotary Vane Pump includes a 4-foot power cord and two kink-free hoses with non-reversible quick connects. The pump is mounted in an open, aluminum frame, which allows for easy access for service. The wick style lubricator requires less maintenance than other lubricator systems. All applicable components are rated 120V/60Hz or ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Split Umbilical Cables are designed for added versatility for use in rigid and flexible configurations. They are constructed with the sample line and exit thermocouple split to the specified length. Split umbilicals are used in flexible systems where the filter compartment is separated from the impinger box with a flexible sample line as in Method 17, Flexible Method 5 and Compact Method 5 ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The model W-NK Wet gas meter is a net-volume type integrating flowmeter that employs a drum as the metering element. As the drum is sealed with water or other fluid, the model W-NK provides the measurement of any gas irrespective of the gas specific gravity and viscosity. Further, since this gas meter permits the measurement of very small flows, exhibits high reproducibility, and offers various ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
EPA Method 4 is used to determine the moisture content of stack gases. A gas sample is extracted at a constant rate from the source. Moisture is then removed from the sample stream and the condensate is measured either by volume or by ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
In all different types of cooling towers drift eliminators are used to reduce the loss of water and emissions. Above the water distribution and the cooling fills, a layer of drift eliminators is installed for this purpose. It catches the water drops which are carried away with the air flow and redirects them into the cooling water ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Our isokinetic probes with an oversheath provide additional support to stabilize the probe during sampling operations. The oversheath also allows the addition of a packing gland to achieve a tight seal between the probe and port. Our oversheath probes measure 2 inches in diameter and are used for Method 5 sampling. Pair this probe with a 4- or 6-inch port flange, listed ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The BioCapt® Single-Use Microbial Impactor helps minimize false positives for microbial activity in pharmaceutical cleanrooms by reducing contamination from handling of agar plates. This results in a decrease in investigations while increasing productivity. Additionally, many costly and time consuming sterilization steps, such as autoclaving, disinfecting, handling and logistics are ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The new XC-53 from Apex Instruments is designed as a cost-effective entry-level metering console for isokinetic sampling. The console features our advanced Peak 32 microcontroller module (MCM) for measuring and displaying stable pressures and temperatures. The transflective LCD screen displays the elapsed time, the pitot velocity pressure (?P), the venturi sample flow pressure (?H) and the ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments stocks a variety of fiber thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters, and available in two different fiber types: borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid-washed to reduce the trace metal content to an absolute minimum. The quartz fiber thimbles are strengthened with alumina and are pre-fired at ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
For custom nozzle sets, use the product table below to add seven nozzles and a case to your quote ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments modular sample case assemblies are versatile, lightweight, and are available in a variety of configurations. Constructed of lightweight, powder-coated aluminum with insulated aluminum panels. Stainless steel hardware. Internal reinforcements reduce flexing when testing with long probes. Front and rear doors provide greater accessibility. The handle is designed for attaching to a ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard protocol for sampling their effluent. Possible ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments PFAS Sampling System is based on the EPA Other Test Method 45 (OTM-45) and Other Test Method 50 (OTM-50) for the isokinetic collection of PFAS from stationary sources. PFAS stands for per- and polyfluoroalkyl chemicals, which are found in a wide range of consumer products and facilities. PFAS can accumulate in the body and may lead to adverse health effects. Gaseous and ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Glass Fiber Filters are most the commonly used filters for particulate sampling. All of the glass fiber filters are binder free and exhibit at least 99.95% efficiency for 0.3 μm dioctyl phthalate (DOP) smoke particles. 934AH is available. Not recommended for metals ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Our updated Air-Cooled Probe design features a more robust alloy construction. Upgraded to 253MA with a new variable-speed high-capacity blower inside the riser, the new design will extend the life of the probe and increase the airflow by an additional ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PTFE-coated glass fiber filters are constructed from borosilicate microfibers and bonded with PTFE. The filters can be folded and handled without loss of fibers. Specifically recommended for Method 26, PM10, and PM2.5 sampling. Great for especially low loading rates and low absorption of acid gases such as SOx or NOx with at least 99.95% retention efficiency (0.3 μm DOP). ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Break-away design Cyclone (PM2-NT) shown with probe and pitot. The Kit does not include Pitot ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
This SB-8-47 modular sample case, modified for use with the SB-47 heated filter oven, secures the probe and impinger case in a rigid manner. The sample frame is made of durable powder-coated aluminum with a stainless steel probe clamp and impinger case ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you