Only show results in Virginia? Ok

Laboratory Analyzers Applications

  • Premium

    Test Kits and Photometric Methods for agriculture, in food or water analysis

    When analyzing water and food, trust plays a very important role. Only careful analysis using tests that are performed correctly and are delivering sound results will help to maintain and improve our quality of life. With ready-to-use tests and test systems from Merck Millipore, you can trust your results. Our broad product range covers everything from water analysis to the control of production process up to the measurement of special food parameters.

    By Merck based in Darmstadt, GERMANY.

  • Premium

    Chemiluminescense based analyzer for industrial applications

    Focuses on medium NOx, NOx-related and multigas-concentrations up to 5’000 ppm where flexibility is a central requirement. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. Typical supported applications are industrial emission monitoring and gas manufacturing control.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    PTR-MS systems for biological research

    Real-time measurement of plant defense and leaf wounding reactions. Measurement of VOCs in dynamic biological systems with low detection limit and without sample preparation.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Chemiluminescense based analyzer for medical applications

    Exhaled Nitric Oxide (FeNO) measurements are easy to perform and may be used to monitor eosinophilic airway inflammation (Asthma). A range of computerized pulmonary diagnostic products ranging from neonatology to adult pulmonary function testing are manufactured by ECO PHYSICS AG. These products are marketed and distributed by the label ECO MEDICS.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    PTR-MS systems for indoor air quality monitoring

    Room-air VOC detection and monitoring. Measurement of most common VOCs causing smells or health effects. Real-time monitoring of emissions related to the Sick Building Syndrome. Ozone induced reactions in aircraft cabins.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    PTR-MS systems for security and safety purpose

    Illicit substances real-time detection with IONICON PTR-MS. PTR-MS combines all features that are needed for analyzing dangerous and illicit substances like explosives, chemical warfare agents (CWA), toxic industrial chemicals (TIC) and drugs.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Monitoring of phenol in water

    The Situation

    A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Chemiluminescense based analyzer for environmental applications

    Focuses on low NOx and NOx-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOx and NOy. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric research.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Chemiluminescense based analyzer for semiconductor applications

    NOx detection is an innovative approach in CMP (Chemical Mechanical Polishing) process control. CMP smoothens the wafer surface with a combined chemical and mechanical polishing procedure. During production, wafers are coated by a thin layer. To avoid damage to the wafer surface, for instance by stress cracks, the NOx emitted as soon as the wafer is plane and blank must be measured. Therefore, a high-resolution NOx-detector, capable of determining exactly when the polishing process must be stopped, is essential. This approach is used successfully in manufacturing and development lines worldwide, since 1996.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Measurement of ethylene oxide for monitoring workplace exposure limits

    The Series 8900 Ethylene Oxide Analyzer combines the selectivity of gas chromatography with the sensitivity of a Photoionization Detector (PID) providing interference free response to Ethylene Oxide (EtO) at levels below 0.05 ppm. This analytical method is referenced in OSHA`s `Occupational Exposure to Ethylene Oxide: Final Standard` 29 CFR Part 1910. The system documents exposure levels including: time-weighted averages (TWA), short-term exposure limits (STEL) and instantaneous alarms. Areas that are typically monitored include; EtO Sources - gas storage areas, sterilizer doors, aeration doors, and the General Work Area - decontamination, packaging and preparation and sterile product storage areas.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Oxygen Permeation Analyzers & Water Vapor Permeation Analyzers for Packaging Industry

    Systech Illinois` comprehensive permeation range includes the recently acquired Lyssy and PermMate product lines which offer precision oxygen and water vapor analysis of packaging film barriers.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Determination of organic acids in beverages

    The method allows determination of organic acids, in soft drinks (juices, fizz drinks) and alcoholic drinks (wines, beer). 

    The capillary electrophoresis method for evaluation of cations concentration is based on differential migration and separation of cations in electric field due to the difference in their electrophoretic mobility. Identification and quantitative determination of the analyzed cations is performed by indirect detection measuring UV absorption at 254 nm (for “CAPEL® -103RT/104T” systems) or 267 nm (for “CAPEL® -105/105M” systems) wavelength.

    The determination is not hindered by the presence of anions of ammonia, lithium, strontuim, barium, manganese, ferrum (II) in the quantities that are typical for the analyzed drinks. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Machine condition monitoring for oil in water/soil

    Overview

    Being able to trust your instruments to make quick, easy and accurate measurements in the field is key when dealing with regulatory requirements. The InfraCal2 infrared analyzer is the choice of experts for measuring oil in produced water; oil contamination in soil; and fats oil and greases in waste streams.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Process control for the petrochemical chemical industry

    Most chemical products as we know today are composed of a few hundreds of basic chemicals, extracted mostly from crude oil and natural gas. Instrumentation, analyzer systems and process optimization are not new to the operation of all chemical and petrochemical processes. However, tightening regulations, competition pressure and increasing raw materials cost urges the industry to go deeper into process control technology. As a single-source supplier of the (petro)chemical industry since many years, AppliTek has supplied them many analyzer systems for monitoring chemical parameters in all sorts of applications, from the actual production step to peripheral treatment processes. Our application people and engineering department understand your needs and translate them into real solutions.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Insitu Flue Gas Desulfurization - DeSOx Analyzer

    The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general CEMs.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    NO2 analyzer - For Medical Application

    The new and unique AS32M NO2 analyzer using CAPS (Cavity Attenuated Phase Shift) technology is an ideal solution for medical device applications such as INO (Inhaled Nitric Oxide). Originally designed for NO2 monitoring in roadside pollution surveillance and air quality applications, the AS32M is suitable for numerous other NO2 monitoring applications. For more information on how this unique analyzer, contact Environnement S.A.

    By Environnement S.A based in Poissy, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you