O2 Sensor (Laboratory Analyzers) Equipment
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 201 is a portable oxygen analyzer used primarily for the measurement of O2 concentration in gas flows, chambers, or gas flushed hoods (such as glove boxes). The analyzer comes with both an “open faced” fitting and a T-fitting, allowing it to be used for analyzing gas flows, or set in chambers where oxygen levels ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Q3 is a portable CO2 analyzer, used for incubator measurement and other scientific applications. It weighs only 2 lbs, and comes with rechargeable batteries, sample probe, charger, and accessories to begin sampling. There is also a TSA approved hard carry case for easy portability and protection ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
O2 and CO2 Analyzer for research processes, gas blending, biotech, and other systems. The Model 902P O2 CO2 analyzer measures 0 to 100% O2 concentrations, and 0-1% to 0-100% CO2 vol/vol full scale, in a variety of process, research, and biotech applications. Options include internal sample pump, battery operation, analog outputs, and complete ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Model 905P is a process O2 analyzer, designed to check oxygen levels in all types of processes, gas blending, biotech, fermentation, fruit storage areas, welding gases, and controlled atmosphere rooms. If you require 0-1000ppm analysis, please see our ZR1000. For those applications where a source of sample flow is not available, the 905P ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 906 CO2 Analyzer is designed for continuous or spot measurement and analysis of carbon dioxide levels. Analysis ranges of 0-5,000ppm, 0-10,000ppm, 0-25,000ppm, 0-20%, or 0-100% vol/vol. Simply introduce your sample gas flow into the inlet of the Model 906 CO2 analyzer, and see results on the LCD within 15-20 seconds. The inlet accepts a flow rate of 5cc/min to 1000 cc/min. If ...
-
based in CANADA
The S147 Rapid Response O2/CO2 Analyzer combines both a laser diode O2 sensor and an infrared CO2 detector. This flow-through analyzer is designed for measurements of rapid changes in O2 and CO2 such as those occurring during O2 uptake and CO2 production from breath by breath measurements of human ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The MODEL 201RS and 201RSP are advanced Percent Oxygen Analyzers loaded with a full suite of standard features. The Analyzers’ compact design includes AMI’s patented ELIMINATOR CELL BLOCK technology, incorporating a complete sample system, and combines it with our industry leading Percent O2 sensors. This combination delivers ...
-
Manufactured by Teledyne APIbased in USA
of extractive CEM systems, from gas turbines to coal-fired boilers. The T200M may be fitted with an optional, internal paramagnetic O2 sensor or an infrared absorption CO2 sensor, reducing integration and operating costs ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The MODEL 2001RS and 2001RSP are advanced Trace Oxygen Analyzers loaded with a full suite of standard features. The Analyzers’ compact design includes AMI’s patented ELIMINATOR CELL BLOCK™ technology, incorporating a complete sample system, and combines it with our industry-leading trace O2 sensors. This combination ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model ZR1000 is a trace oxygen analyzer used for the measurement of trace oxygen in all types of inert environments. The ultra-fast zirconia sensor will respond from 1000 to 10 ppm in about 23 seconds, as opposed to other instruments which may take minutes to reach 10ppm. This unit is powered by an AC to 12Vdc power ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
The Gasboard-2000 NDIR gas bench which is based on Dispersive Infra-Red (NDIR) sensing principle to measure CO, CO2, HC in exhaust gases from gasoline and petro engines. The Electrochemical O2 and NO sensors can be plug-in easily on Gasboard-2000. It complies with advanced international standards: OIML R99 Class 1, 0, 00 standards, and widely ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
The Gasboard-2000 NDIR gas bench which is based on Dispersive Infra-Red (NDIR) sensing principle to measure CO, CO2, HC in exhaust gases from gasoline and petro engines. The Electrochemical O2 and NO sensors can be plug-in easily on Gasboard-2000. It complies with advanced international standards: OIML R99 Class 1, 0, 00 standards, and widely ...
-
Manufactured by Nova Analytical Systems Inc. - part of the Tenova Groupbased in USA
The Nova 410 Series represent Nova's best value in continuous process O2 analysis. This analyzer utilizes a long-life electrochemical 'fuel cell' sensor for the detection of Oxygen in process gases. The sensor produces a small millivoltage output which is directly proportional to the Oxygen detected. The output is then amplified and ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 3100 OEM-3 is a three-channel version of our high-performance zirconia oxygen (O2) analyser. Supplied in a metal controller box, the Rapidox 3100 OEM-3 comprises three individual zirconia sensors on bespoke length cables with several options for gas fittings. All three sensor channels are controlled by a single RS485 ...
-
Manufactured by AMETEK MOCONbased in USA
CheckPoint 3 - Portable Gas Analyzer for Quality Control of Modified Atmosphere Packages (MAP). The new CheckPoint 3 is the most advanced portable gas analyzer on the market, enabling you to quickly and easily check for O2 and CO2 levels in Modified Atmosphere Packages (MAP) of any shape and ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 2100-OEM-RSB range are special miniaturised 24V OEM versions of our existing high-performance zirconia oxygen (O2) analyser. The compact new design allows integration into the tightest of spaces with the exact same performance specs and features of our existing OEM analyser. The board is fitted with a robust cabled zirconia ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 2100-OEM-RSB range are special miniaturised 24V OEM versions of our existing high-performance zirconia oxygen (O2) analyser. The compact new design allows integration into the tightest of spaces with the exact same performance specs and features of our existing OEM analyser. The board is fitted with a robust cabled zirconia ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 1100 OEM is a cost-effective oxygen (O2) sampling gas analyser fitted with a zirconia oxygen gas sensor and sample pump. Specifically designed to measure ppm measurements in the 0-30% oxygen range at ambient temperature, the gas sample is pumped through the sensor via a tube allowing the unit to be located some distance ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using chemiluminescence technology, the Model 42i LS measures the amount of nitrogen oxides in the air from sub-ppb levels up to 100ppm.The Model 42i LS is a single Chamber, single photomultiplier tube design that cycles between the NO and NOX modes. The 42i LS has independent outputs for NO, NO2, and Nox and each can be calibrated separately. Dual range and Auto range are standards features as ...
-
Manufactured by Teledyne APIbased in USA
The Model T200H combines the proven chemiluminescence principle with a number of innovative features to provide reliable and repeatable NO, NO2, and NOx measurements for extractive type CEM systems. A high-efficiency stainless steel thermal NO2 converter provides durable and consistent operation under the harshest conditions (other converter options also ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you