Laboratory Automation Applications

17 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Laboratory Automation ×

Water measurement systems & sensors for water quality monitoring

by Isodaq Technology - Hydro-Logic Group     based in Bromyard, UNITED KINGDOM

Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment.  Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations.  Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most reliable and timely means of ensuring that treatment processes are operating efficiently and that EPR compliance is maintained.

Sediment and Nutrient Loads

by FTS     based in Victoria, BRITISH COLUMBIA (CANADA)

SedEvent is an event-driven, automatic grab sampling system that provides a simple and practical method of accurately determining suspended sediment and nutrient loads. While suspended sediment concentration (SSC) cannot be directly measured accurately or reliably, turbidity has been shown to be an excellent surrogate for SSC. Turbidity is caused by suspended particulate matter such as clay, silt, algae, organic and inorganic chemicals and acids like fertilizers, and microscopic organisms like harmful bacteria. These contents give water its cloudy or turbid appearance, and turbidity in natural waters is recognized as an important indicator of natural health. Measuring suspended sediment concentrations used to be labor-intensive, costly, inaccurate and impractical. SedEvent not only makes it possible and practical, it makes it simple.

Laboratory Weighing - Weight Calibration

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Balances should always be tested with calibrated weights you can rely on and trust. Only calibrated weights are traceable to the International Prototype Kilogram at the BIPM (Bureau International des Poids et Measures) in Paris and ensure accurate weighing results.

Laboratory Weighing - Differential Weighing

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Perfecting a classical method. Determining the difference between the initial and residual weights of samples in percent and grams is one of the most frequent routine applications in a laboratory. METTLER TOLEDO offers a complete solution in this area. It consists of a balance, a printer, and application software for the specific balance being used. There is a choice between an integrated balance application, or an optional software cassette which simply plugs into the balance.

Laboratory Weighing - Stent Weighing

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Weighing delicate tubular samples such as sticks, springs, tungsten wires or stents require highest weighing precision but unfortunately are difficult to handle. Our Automatic-S Microbalances are the best solution for weighing such delicate samples.

Laboratory Weighing - Dynamic Weighing

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The Dynamic Weighing application allows weighing results to be determined even under adverse conditions. For instance, when determining the weights of animals, weighing on board ship, or on an unstable surface.

Laboratory Weighing - Formulation

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

No matter whether flavorings, spices, or pharmaceutical powders are involved, formulation requires precision. Incorrect mixtures are costly and may even be dangerous. Irrespective of the complexity of your formulas, how many materials you use, and whether the quantities are large or extremely small: METTLER TOLEDO formula-weighing solutions can fulfill all your requirements.

Gas monitoring instruments and systems for stack testing

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives and regulations set. Two major parts of this on-going quality assurance cycle are the QAL2 and AST procedures. A test laboratory performs tests on the systems on-site, and determines whether the systems fulfill the set requirements or not.

Automation of molecular pathology

by Aurora Biomed Inc.     based in Vancouver, BRITISH COLUMBIA (CANADA)

Tumor markers found in blood, urine and body tissues can be used in diagnosing and treating cancer. Each tumor marker is indicative of a particular disease and thus can be used for the screening, monitoring and diagnosis of specific tumor types. In addition to being used in prognosis, these molecular markers help to predict the response, resistance and toxicity to therapy. For example, BCR-ABL gene sequence detection is used to diagnose chronic myelogenous leukemia and acute lymphatic leukemia.

Industrial Weighing - Counting

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

When verifying inventory, packing parts in containers, or confirming production quantities, every part is important. METTLER TOLEDO is the leader in precision parts counting technology ensuring that only the right number of parts are delivered to you or your customer. Our super-precise solutions such as BBK4xx counting scales or the IND690count terminal offer unprecedented counting accuracy.

Sample preparation and pumping systems for wastewater treatment industry

by Pollution & Process Monitoring Ltd     based in Sevenoaks, UNITED KINGDOM

A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter removes solids above 50 micron size.

LIMS Solutions for the Chemical, Petro-chemical & Oil Industries

by Autoscribe Informatics     based in Reading,, UNITED KINGDOM

It is vitally important for today’s Petro-Chemical and Oil manufacturing industries to control the cost efficiency of their operations for investor interests and environmental impact equally.  Their laboratories are central to controlling production and most importantly need to provide accurate, transparent and traceable data. All production processes and product quality must adhere to stringent manufacturing regulations; therefore it has become more and more apparent that LIMS are the only way of controlling the manufacturing of Oils and Petro-Chemicals.

LIMS Solutions for Metals, Mining & Mineral

by Autoscribe Informatics     based in Reading,, UNITED KINGDOM

Companies involved in mineral extraction, metal work and other mining activities have recently begun to understand the necessity for controlling their processes with robust testing, monitoring and process risk assessments. While many laboratories in this sector still run Excel sheets for data management, others understand the role of LIMS for measuring staff safety, improving productivity and adhering to regulation.

Energy reduction and coagulation process control for wastewater treatment industry

by Pollution & Process Monitoring Ltd     based in Sevenoaks, UNITED KINGDOM

One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water quality.

PTR-MS systems for food & flavor science

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

Aroma real-time quantification with PTR-MS. Rapid screening for complex aroma systems. Rich chemical fingerprints due to soft ionization. Real-time sampling: high throughput. Ideal for chemometric data-mining methods.

Ambient air monitoring by FID detection – airmoVOC BTEX

by Chromatotec Group     based in Val de Virvée, FRANCE

Urban pollution is a problem that concerns more and more people in charge of public health. In large cities, car emissions are an important source of atmospheric pollution. This problem is growing as the traffic keeps on increasing. BTEX compounds are present in car emissions. It is therefore important to be able to analyze them with short analysis cycle duration and on a continuous and automatic way.

Sampling for the water and wastewater industry

by Watson-Marlow Fluid Technology Group     based in Falmouth, UNITED KINGDOM

Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process.

Need help finding the right suppliers?

Let the XPRTs do the work for you