Laboratory Crushers Equipment For Monitoring And Testing Available In San Marino
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
Crushing & milling is achieved by a shearing action between the slowly rotating crushing cone and the stationary outer grinding ring. To adjust the grinding fineness, the crushing gap between the grinding tools can be changed by turning the feed hopper. Due to the toothing on the fine cone, final finenesses of max. < 2 mm can be achieved with the cone crushers. To ensure a long service life, the ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
The bulk sample is crushed with a vibrating disc mill, featuring a tungsten carbide grinding vessel optimized for the AMP. Integrated nozzles allow blowing out of the vessel after grinding. The fine material from the main grinding is pressed into a sample ring using a hydropneumatic cylinder, implementing preset cycles for pressure build-up, holding, and release. After pressing, the specimen ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Due to its compact size and sympathetic design, the RH Crusher is ideally situated to duties in sampling systems. The RH Crusher reduces particle size by use of two high speed rotors each with two sets of tri-lobed hammers. The hammers break the feed lumps sufficient to pass the sizing grids fitted to the crusher base. Independently driven and counter-rotating, the rotors draw the feed into the ...
-
Manufactured by RETSCH - part of Verder Scientificbased in GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the crusher ...
-
Manufactured by JXSC Mine Machinery Factorybased in CHINA
JXSC jaw type rock crusher is usually used as a primary crusher and secondary crusher to reduce the size of medium-hard materials to smaller physical size. Jaw rock crushers are capable of working with the mobile crushing station, underground crushing because of its related small ...
-
Manufactured by Equilab, S.A.based in SPAIN
The EQR-200 Vibratory Disc Mill is a grinding unit especially designed to obtain analytical granulometries of a wide variety of samples, such as glass, earth, slag, metallic oxides, ferroalloys, and ceramic materials, amongst many other. This mill can quickly grind an ample range of different materials, from semisoft to the hardest, brittle or fibrous. All the processes are controlled by a ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
The Roller crusher with smooth rollers DRC 200х125 is designed to crush brittle materials of various strengths. The operational principle of the roller crusher is based on simultaneous compressive and shear strains between rollers rotating in opposite directions. See more: ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Jaw crusher JC 6М is designed for crushing small samples of material in laboratories with low and medium workloads. The small size, low weight and electric motor power make it possible to use the JC 6М in mobile laboratories, in low-capacity process installations and in geological surveying. See more: http://vibrotechnik.com/ ...
-
Manufactured by Verder Scientificbased in GERMANY
The Jaw Crusher BB 50 has been specially designed for sample preparation in the laboratory. It is used for therapid, effective crushingand pre-crushing ofmedium-hard, hard, brittle and tough materials.Thespace-saving, dust-tight instrumentfits on any laboratory bench and is ideally suited to crush small amounts of sample with large feed sizesgently and without loss.To avoid metallic ...
-
Manufactured by Genomic SASbased in FRANCE
Essentially intended for controlling the purity of the seeds produced. The Mini-Grinder is a high throughput laboratory grinder for plant matrices, capable of grinding 24 samples simultaneously in less than a minute. Used in agriculture, agrifood and the environment, it is suitable for grinding plants and seeds, frozen or unfrozen matrices. ...
-
Manufactured by RETSCH - part of Verder Scientificbased in GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Jaw crusher JC 15 is a high-power model designed for busy laboratories or small production facilities. The increased wall thickness, 5.5 kW electric motor and durable bearings make it possible to operate the JC 15 continuously with minimal process interruptions. See more: ...
-
Manufactured by Schutte-Buffalo Hammermill, LLCbased in USA
Processes various blocky materials to desired size with minimum fines. The economical Laboratory and Pilot Scale Jaw Crushers are available in several models from benchtop to production scale. Suitable for crushing a variety of abrasive ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
The jaw crushers are designed to crush brittle bulk materials of various strength and hardness. In the jaw crushers, the material particles are broken down by the compressive and shear strains between the fixed and moving jaws. The grain size of the crushed material is determined by the gap between the jaws in the lower part (the discharge slot) and the physical properties of the material. See ...
-
Manufactured by RETSCH - part of Verder Scientificbased in GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the crusher ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
The Jaw crushers are designed to crush brittle bulk materials of various strength and hardness. In the Jaw crushers, the material particles are broken down by the compressive and shear strains between the fixed and moving jaws. The grain size of the crushed material is determined by the gap between the jaws in the lower part (the discharge slot) and the physical properties of the material. ...
-
Manufactured by Xenemetrix Ltd.based in ISRAEL
Key Applications: ...
-
Manufactured by Qingdao Decent Groupbased in CHINA
Qingdao Decent Group laboratory hammer crusher adopts a full-width hammer head, and a high-quality motor drives the rotor to rotate quickly. The full-width hammer head will impact, shear and tear the material from the ore sample entering the crusher cavity. At the same time, the gravity of the ore itself causes the material to rush from the high-speed rotating hammer to the baffle and screen in ...
-
Manufactured by Xenemetrix Ltd.based in ISRAEL
Key Applications: Glass, land, slag, coal, clinker, coke, metal oxides, ferro alloy, cement, ceramics, minerals, silicates, geological samples and ...
-
Manufactured by Qingdao Decent Groupbased in CHINA
Qingdao Decent Group dependable, hard wearing, heavy duty and low maintenance series of jaw crushers are suitable for use in a large batch or continuous operating environment. Typical applications will include general primary crushing of lump ore in analytical and metallurgical laboratories, sampling stations and pilot ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you