Laboratory Crushers Equipment For Monitoring And Testing Near Kiribati
-
Manufactured by Sepor, Inc.based in USA
The laboratory anti-friction bearing crushing rolls are of rugged construction for batch or continuous abrasive size reduction service in mineral, chemical and industrial applications. It is ideal for batch sample feed preparation for subsequent grinding, leaching and other processing operations. Also, it is suited for use as a secondary crusher in continuous pilot plant crushing circuits, and ...
-
Manufactured by Sepor, Inc.based in USA
The Chipmunk Jaw crushers are smaller (2.25”x 3” and 2.25” x 4”) and capable of reducing friable material, including ore and minerals to 1/16”. Standard jaw and cheek plates are abrasion resistant steel. Manganese steel plates are available as an ...
-
Manufactured by Japan Analytical Industry Co.Ltdbased in JAPAN
Maximum of 3 g sample in the JFC-300 cell can be ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
Crushing & milling is achieved by a shearing action between the slowly rotating crushing cone and the stationary outer grinding ring. To adjust the grinding fineness, the crushing gap between the grinding tools can be changed by turning the feed hopper. Due to the toothing on the fine cone, final finenesses of max. < 2 mm can be achieved with the cone crushers. To ensure a long service life, the ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
The bulk sample is crushed with a vibrating disc mill, featuring a tungsten carbide grinding vessel optimized for the AMP. Integrated nozzles allow blowing out of the vessel after grinding. The fine material from the main grinding is pressed into a sample ring using a hydropneumatic cylinder, implementing preset cycles for pressure build-up, holding, and release. After pressing, the specimen ...
-
Manufactured by Xenemetrix Ltd.based in ISRAEL
Key Applications: ...
-
Manufactured by Xenemetrix Ltd.based in ISRAEL
Key Applications: Glass, land, slag, coal, clinker, coke, metal oxides, ferro alloy, cement, ceramics, minerals, silicates, geological samples and ...
-
Manufactured by Verder Scientificbased in GERMANY
The Jaw Crusher BB 50 has been specially designed for sample preparation in the laboratory. It is used for therapid, effective crushingand pre-crushing ofmedium-hard, hard, brittle and tough materials.Thespace-saving, dust-tight instrumentfits on any laboratory bench and is ideally suited to crush small amounts of sample with large feed sizesgently and without loss.To avoid metallic ...
-
Manufactured by IKA-Werke GmbH & Co. KGbased in GERMANY
Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. With the MultiDrive basic it is possible to mix or grind. There is a USB interface available for easy actuation and documentation respectively. In combination with the milling chamber ...
-
Manufactured by Premier Lab Supply, Inc.based in USA
VDM 2000 Vibratory Disc Mill. Feed material: Medium-hard, brittle and hard-tough; size -200V 50/60Hz; 700-1500 RPM. Order grinding set separately. Instrument without ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Due to its compact size and sympathetic design, the RH Crusher is ideally situated to duties in sampling systems. The RH Crusher reduces particle size by use of two high speed rotors each with two sets of tri-lobed hammers. The hammers break the feed lumps sufficient to pass the sizing grids fitted to the crusher base. Independently driven and counter-rotating, the rotors draw the feed into the ...
-
Manufactured by RETSCH - part of Verder Scientificbased in GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on ...
-
Manufactured by RETSCH - part of Verder Scientificbased in GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the crusher ...
-
Manufactured by RETSCH - part of Verder Scientificbased in GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the ...
-
Manufactured by RETSCH - part of Verder Scientificbased in GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the crusher ...
-
Manufactured by Qingdao Decent Groupbased in CHINA
Qingdao Decent Group dependable, hard wearing, heavy duty and low maintenance series of jaw crushers are suitable for use in a large batch or continuous operating environment. Typical applications will include general primary crushing of lump ore in analytical and metallurgical laboratories, sampling stations and pilot ...
-
Manufactured by Qingdao Decent Groupbased in CHINA
Qingdao Decent Group laboratory hammer crusher adopts a full-width hammer head, and a high-quality motor drives the rotor to rotate quickly. The full-width hammer head will impact, shear and tear the material from the ore sample entering the crusher cavity. At the same time, the gravity of the ore itself causes the material to rush from the high-speed rotating hammer to the baffle and screen in ...
-
Manufactured by Schutte-Buffalo Hammermill, LLCbased in USA
Processes various blocky materials to desired size with minimum fines. The economical Laboratory and Pilot Scale Jaw Crushers are available in several models from benchtop to production scale. Suitable for crushing a variety of abrasive ...
-
Distributed by MJS BioLynx Inc.based in CANADA
Refrigerator Racks. Contoured design for safe handling. Fill lower section with water or crushed ice to chill sample tubes quickly. Top inset tray secures tubes in place. Molded polystyrene racks stack neatly to save benchtop ...
-
Manufactured by Glen Mills Incbased in USA
The Jaw Crusher BB 500 is used for rapid, effective, crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel, and its efficiency and safety makes the BB 500 ideal for sample preparation in laboratories and industrial plants. For small amounts of sample the BB 500 is used batch-wise; for larger amounts it can ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you