Laboratory Gas Applications available in Albania
-
Premium
Mercury determination in natural gas
Introduction The natural gas is a significant source of ingres s of mercury in the environment. The typical mercury concentration in natural gas may vary from 0.01 to 200 μ g/m3 . Mercury, being present in hydrocarbon gas, initiates corrosion of pipelines and catalyst poiso ning during gas transportation and processing, and these effects have serious implications for the gas-processing ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Fully-automated gas chromatographs solutions for process control sector
Bring your chemical processes under control for the purpose of efficiency improvement, output optimisation, quality control and waste reduction. Synspec analytical equipment, whether gas chromatograph or laser-based, will help to achieve your efficiency, optimisation, environmental and sustainability ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Gas analyzers and monitoring systems for container monitoring sector
In addition to miscellaneous products, shipping containers might contain toxic gases that present health hazards for workers opening or unloading them. Gasmet manufactures portable and powerful gas analyzers for measuring these hazardous gases inside enclosed spaces. With our solutions, you can measure vast variety of gases simultaneously in ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Portable and fixed gas analysers for AD research
Many universities, government departments and specialist operators carry out research. This can be using full-scale pilot AD plants or small-scale laboratory ...
By QED Environmental Systems based in Dexter, MICHIGAN (USA).
-
Measurement solution for fire testing for the railway industry
A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further ...
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Mass flow devices for analytical instrumentation
Axetris mass flow devices are used in a variety of analytical applications: Gas Chromatography, Mass Spectrometry, Atomic Spectroscopy, Elemental Analysis, Thermal Analysis, Bioreactor and ...
By Axetris AG based in Kaegiswil, SWITZERLAND.
-
Gas Analyzer for Anticorrosive Protection
Processes with corrosive constituents are the applicative challenge in gas analytics. Some gases form compounds with moisture which corrode components in contact with the measuring gas, hereby impair measuring accuracy, ultimately destroy, the measuring capability. Therefore, atMesskonzept GmbHwe only use the highest-quality materials for gas paths, such as stainless steel 1.4571 and O-Rings made of FPM (Viton®) or FFKM (Kalrez®), highly resistant fluoro-elastomers. However, the micromechanical sensor ...
By Messkonzept GmbH based in Frankfurt am Main, GERMANY.
-
Measurement solution for FTIR Vs. GC in gas analysis
Comparison of Technologies A gas chromatograph (GC) has traditionally been the technology of choice for laboratory analysis of gas samples. GCs have been used for over 50 years in the qualification and quantification of complex mixtures of gases. The techniques and methodology required to run GCs are often a pre-requisite for any laboratory technician. Recent developments in Fourier Transform Infra-Red (FTIR) gas analysis has enabled this technology to start to replace GCs in the ...
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Analytical instruments for gas chromatography
Gas Chromatography requires a stable repeatable flow of the carrier gas with negligible temperature drift. The Axetris MFC provides excellent control of the gas flow resulting in sharp peaks and high resolution of the chromatograms. Multiple calibrations allow the control of Helium, Hydrogen or Nitrogen. Due to the high turn down ratio of 1000:1 and more, a broad range of flows can be ...
By Axetris AG based in Kaegiswil, SWITZERLAND.
-
calibration gas
calibration gas , British specialty gases company, with a local North Africa presence. We can supply you with high quality gas mixtures for a wide range of applications including Environmental Monitoring, Gas Detection, Mud Logging, Laser Cutting, and Laboratory Analysis. Our gas mixtures are used in the Oil, Gas and Petrochemical industries Our main focus is to give our customers gravimetrically produced, high precision calibration gas mixtures conforming to ISO 6142, along with a range of high purity gases ...
By AG Gases Ltd based in Stoke-on-Trent, UNITED KINGDOM.
-
Process Industry Applications
Accurate, dependable real time results in harsh environments. Industrial processes typically result in some of the most challenging gas measurement environments; high-temperature, high humidity, particulate matter, and gas mixtures of complex and variable composition. ...
By MIRICO based in Chilton, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you