Laboratory Gas Equipment For Monitoring And Testing
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…). The Sonimix 7050 Multi range gas ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Gas analyzers with an FID (flame ionization detector) are well suited for continuous total hydrocarbon measurement. The measurement is not component specific but substance-class specific. In the first approximation, the measurement result is proportional to the number of C atoms in the respective ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compressed air system with compressor and filter. Oil-free dental compressor. For process gas, lab or dental gas or zero gas system for gas analysis. Modular system for stationary installation. Optionally with catalytic gas purifier and ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Specializing in hydrogen and noble gases: For continuous measurement of hydrogen and noble gases, the specific thermal conductivity of the sample gas mixture is measured and used to calculate the concentration. Only binary gas mixtures can be measured directly. If more than two components are present, the concentrations of all other components must be measured separately using other measuring ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The LGT-580 Portable Laser Gas Analyzer is composed of two parts: analyzer host and portable sampling pipe. The core module of the host employs high-precision Tunable Diode Laser Absorption Spectroscopy to fast analyze concentration of multiple gases including O2, CO, NH3, CO2, CH4, H2O, HCl, HF, HCN, H S, etc. Generally, one single analyzer can only measure one kind of component. The analyzer is ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
Large Analytical Screening Machines GAS can be controlled with the innovative "Lab-Co" app and offer the user new possibilities. The machines are characterized in particular by the following features: Display of vibration amplitude, reading of weighing data via Bluetooth, evaluation of sieve analyses with graphic display as line or RRSB diagram, Standard Operating Procedures (SOP), calling up the ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Powerful and perfect for multitasking. The UniversalExtractor E-800 is powerful and perfect for demanding extraction tasks. Six distinct extraction positions enable individual process control and simultaneous operation of different extraction methods with high speed and ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2106 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 standard. The sonic nozzle principle makes it the most accurate and stable device on the market. It generates binary mixtures from 0 to 100% in fixed steps in a ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The Standard CEMS is a low cost emissions monitoring package designed to operate in a general purpose, environmentally controlled shelter or cabinet. The targeted markets are NOX reduction sites at Refining, Hydrocarbon Processing and Chemical Plants. The standard monitoring requirements are based on the US EPA 1990 Clean Air Act as detailed in 40 CFR-Part 60, as well as local and state ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The SIPROCESS UV600 is an extractive UV gas analyzer that can measure up to three components simultaneously. SIPROCESS UV600 with state of-the-art electronics and software, has the interfaces required for remote monitoring from a network as well as connecting to a process control ...
-
PremiumManufactured by ARC Filtration System Ltdbased in CHINA
Capsule Filter is disposable filters,free of adhesives binders and other chemicals. Available with a wide range of filter medias for options to meet various filtration requirements ldeal for small batch prefitration and final fiitration of liquids or gas in ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The ULTRAMAT 23 is an innovative multi-component gas analyzer which can be equipped with the following sensors: IR detector for IR-active gases, UV photometer for UV-active gases, H2S sensor (electrochemical), O2 sensor (electrochemical or paramagnetic), and used accordingly in numerous applications and industries. The integrated automatic calibration function using ambient air provides the ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
For oxygen standard applications. The OXYMAT 61 is a cost-effective oxygen analyzer for standard applications. The OXYMAT 61 requires ambient air as reference gas. This is supplied by a pump that is integrated into the analyzer housing. Alternatively, pressurized bottle air can be used. The OXYMAT 61 measures oxygen using the paramagnetic alternating pressure method. This guarantees perfect ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Known for its flexibility, power, and reliability, the process gas chromatograph MAXUM Ed. II stands for state-of-the-art technology for the analysis of both liquid and gaseous samples. It is used in a wide variety of applications primarily in refineries, the oil refining industry, and the chemical ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Special analytical tasks require stable temperatures in the oven to optimize separating performance of the components. The requirements for optimum separation performance are met with our two oven types. The airless oven provides extremely stable isothermal temperatures with high control accuracy, completely without the use of air. The airbath oven offers both isothermal and ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The OXYMAT 64 can measure oxygen concentrations in the smallest traces, even down to the minimal measuring range of 0...10 ppm. This is most relevant in air separation plants, in the technical gas production, and welding of high-alloy steels, titanium, and the like under a protective atmosphere. Further applications are realized in hardening shops, in the chemical industry, and in the food ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The ECO PHYSICS analyzer nCLD 88 offers precise measurement of nitric oxide. The extremely high sensitivity and fast response time of the NO-analyzer allows the detection of concentrations in the range of parts per trillion. Ease of use guarantee flexibility for standard applications as well as scientific research. In combination with the liquid purge vessel the nCLD 88 measures nitrites, ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE-LASER-100P The portable laser gas analyzer is composed of a gas analyzer main unit, an integrated heat tracing line, and an extendable probe. The sample gas is sampled and analyzed by a high-temperature heat extraction technique. Under the action of the sampling pump, the gas to be tested enters the gas analyzer main unit to analyze the gas chamber through the front-end filter element and the ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Synspec supplies the HYDRO50R product line of High Purity Hydrogen Generator modules for FID and CARRIER GAS for GC, to fit almost any type of application which needs H2 production close to the consumer. Based on the field proven Solid Polymer Electrolyte (PEM) cell technology, pure Hydrogen is produced at low pressure from electricity and high quality distilled water (ZEROWATER). This process ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you