Only show results available in Connecticut? Ok

Laboratory Glassware Applications

  • Premium

    Thermal oxidation for the glass industry

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM.

  • Premium

    Emission control solutions for Glass and ceramic furnaces sector

    Glass and ceramic furnacesare typically associated with emissions of very fine particles (< 5 µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. Solving this problem may or not require a two stage dedusting system such a cyclone pre-separation system followed by an ESP. Client`s needsfrequently include a...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Premium gas generators and calibration solutions for microwave plasma-atomic emission spectrometer (MP-AES) sector

    LNI Swissgas provides a large range of innovative gas generators for Microwave Plasma-Atomic Emission Spectrometer (MP-AES) applications.

    By LNI Swissgas based in Versoix, SWITZERLAND.

  • Premium

    Evaporators and concentrators for glass

    Effluent from grinding processes, effluent from coloring processes.

    By Eco-Techno SRL. based in Busnago MB, ITALY.

  • Premium

    Glass sorting for the glass recycling industry

    Elimination of contaminants; Ceramics, stones, porcelain, Metal, Glass ceramic (heat resistant glass), Leaded glass, Organic impurities, Plastics, Cork, Paper. Sorting and recovery of; White glass, Green glass, Brown glass, Other colors and combinations of colours.

    By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.

  • Premium

    Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry

    Technical ceramics covers a wide range of advanced ceramic materials developed for their excellent mechanical, electrical and thermal properties. They are often highly resistant to melting, bending, stretching, corrosion and wear. The use of advanced ceramics in aerospace, automobile, defence and energy markets is becoming increasingly widespread. Carbolite Gero furnaces are widely used in both research and production for the debinding and sintering of technical ceramics. For the debinding process (of green...

    By Carbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM.

  • Premium

    Air pollution control solution for glass production sector

    Silicate fumes and acid gases can occur in the production of various glasses. Acid gas scrubbers are extremely effective in controlling these emissions.

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Plasma-Based Glass Coatings

    Be equipped with quick and stable power, fast arc detection, and low arc energy. Glass coating is rapidly advancing. Over the last 20 years, Advanced Energy has played a major role in its evolution. As new technologies change the industry, our dedicated team focuses on developing repeatable methods that improve throughput and yield. We pioneer and refine advanced DC, pulsed-DC, low-frequency AC, and bipolar-pulsed DC plasma applications. Explore new capabilities, experience unrivaled benefits, and create increasing...

    By LumaSense Technologies, Inc., An Advanced Energy Company based in Milpitas, CALIFORNIA (USA).

  • Premium

    Continuous emissions monitoring for glass manufacturing industries

    Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and others.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Metals separation equipments for cleaning metal pollutants for glass industry

    REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from glass.

    By Regulator-Cetrisa based in Gava, SPAIN.

  • Premium

    Monitors and analysers for Glass industry

    Precision temperature measurements are critical to the glass-making process. We supply a range of advanced solutions designed specifically for the glass industry, meeting the highest standards of quality and reliability. Glass is used for a variety of purposes, and can be shaped, toughened, coloured, laminated or treated to suit specific requirements. Our measurement systems provide accurate temperature monitoring to support these applications. As the world leader in temperature measurement, AMETEK Land has...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Cleaners for Food and beverage industry

    IPC offers a full line of precision cleaners that provide consistent results with every use and leave surfaces completely clean. An economical 1-2% concentration in water is effective in most cleaning applications. Typical uses include removing protein, starch, grease, fat, gum, oil and baked on soil from processing equipment, lines, and filter membranes.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Healthcare & veterinary industry

    Powerful, earth-friendly cleaners available in a wide range of formulas to meet specific cleaning requirements for reusable instruments and equipment prior to sterilization. These cleaners are designed to quickly and efficiently remove blood, feces, urine, mucus, fat, sweat, tissue, and other biological debris. Common uses include cleaning diagnostic and surgical instruments, life-support devices, hospital furnishings, and institutional linens.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for industrial Manufacturing industry

    We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from stamped metal, parts and equipment without the hazards associated with solvents. Our cleaners are also proven in removing soils from filter membranes used in wastewater treatment systems.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Metalworking industry

    Effective cleaning of machined or formed parts is a key step in all manufacturing processes. At IPC, we understand for a surface to be successfully plated or painted, it must first be free of contaminants. Our cleaners remove dirt, cutting oil, metal fines, flux, and other particulates from stamped metal and precision parts without the hazards associated with solvents. An economical 1-2% concentration in water is effective for most cleaning applications. Our cleaners are also proven in removing soils from filter...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Semiconductors/electronics industry

    Our cleaners are used in the manufacturing of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items. They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals. When rinsed properly our products leave no residue and your precision parts are ready for further processing.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Laser micromachining systems for glass and metals micro marking sector

    Glass Micro Engraving: Glass engraving by ultra-fast laser became growing micromachining application area in recent few years. Laser engraving technology allows to achieve line width <3 um and <0.5 um glass chipping. Engraving with low chipping is key important in automotive, military, optical component manufacturing and many other applications.

    By ELAS, Ltd. based in Vilnius, LITHUANIA.

  • Capabilities of the Adsorbent Tube Injector System (ATIS™)

    The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is construct...

    By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

  • Measurement solution for glass wool insulation manufacture

    The installation of suitable installation material in buildings is a cost effective way to reduce energy costs. The manufacture of insulation from minerals or mineral products, such as glass. Recycling glass to form insulation materials is another way to keep the process "green".

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you