Laboratory Membranes Equipment For Monitoring And Testing In USA
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Applications / Characteristics: Increased chemical resistance used to monitor airborne particulates. Does not adsorb acid ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Cellophane membrane 0,045 mm. Roll wide 60 cm, length 50 meter, in ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Applications / Characteristics: Increased chemical resistance used to monitor airborne particulates. Does not adsorb acid ...
-
PremiumManufactured by Silcarbon Aktivkohle GmbHbased in GERMANY
Silcarbon also provides the following filter materials for water purification: Quartz sand: Filter sand. Anthracite: Filter coal N. Lignite coal: Filter coal ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Pressure membrane extractor for maximum 15 ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The GFA-2590K in-stack thimble holder kit includes a selection of the seven most commonly used nozzle inserts, ranging from 1/8-inch to 1/2-inch, and one housing. The entire kit is conveniently packaged in a foam-lined carrying case for protection. The thimble holder connects directly to the end of the probe with a 5/8-inch tube union. One metal taper clip is included in the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Membrane apparatus for pF determination pF 3.0 - 4.2 (1.0 - 15.0 bar). Standard set for maximal about 15 ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
FLUORAT-02 is a multifunctional fluorescence analyzer intended for analysis of water, soil, foodstuff, etc. This instrument determines a wide range of analytes based on fluorescence, chemiluminescence, phosphorescence and photometry ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Analytik Jena’s AOX sample preparation systems minimize downtime while you increase throughput of AOX samples and remain flexible and ...
-
Manufactured by Eurofins Built Environment Testing EMLab P&Kbased in USA
The 37mm filter cassette is pyrogen-free and preloaded with 0.45um polycarbonate membrane filter. This cassette may be used for the detection of airborne endotoxins and Beta-D ...
-
Manufactured by Cytivabased in USA
Cytiva’s Whatman Grade GF 8 glass microfiber filters are used for filtration of coarse particles. GF 8 offers faster filtration and a higher air flow rate compared to the similar Grade GF 9 ...
-
Manufactured by Cytivabased in USA
Anopore inorganic membrane (Anodisc) is well suited for a wide range of laboratory filtration applications. This novel material has a precise, nondeformable honeycomb pore structure with no lateral crossovers between individual pores, that filters at precisely the stated cut-off, allowing no larger sized particles to pass through the membrane. Anopore inorganic membrane is composed of a ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Zefon offers a complete line of preloaded air sampling filter cassettes manufactured to meet all applicable NIOSH, OSHA, and EPA standards. All cassette housings are manufactured in-house from polystyrene, polypropylene, or conductive materials and are available in two, three, or four piece configurations. Cassettes are individually assembled and preloaded under stringent quality assurance ...
-
Manufactured by Cytivabased in USA
Recommended for microbiological culturing and sample preparation, Cytiva’s Whatman cellulose nitrate membrane filters offer very narrow pore size distribution and low levels of extractables. Sterile membrane filters eliminate the risk of contamination that could impact analysis High strength and ...
-
Manufactured by International Light Technologies Inc.based in USA
The ILT2400-UVC Light Measurement System has everything you need to start validating the light output from your UV light source. It's not enough to trust the manufacturer's specifications. You must verify that the system you're entrusting the health and well being of your patients to is doing what it says - deactivating germs and killing pathogens. ...
-
Manufactured by Sartorius AGbased in GERMANY
These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.8 µm with a pore density of 4.0E+07 cm². Pack of 100 white 25 mm discs that have a high chemical resistance and good thermal stability for accurate fractionation of particulates. Smooth, flat surface for good ...
-
Manufactured by Cytivabased in USA
Anopore inorganic membranes (Anodisc) from GE are well suited for a variety of filtration applications. With a novel aluminum matrix and honeycomb pore structure, Anodisc facilitates controlled ...
-
Manufactured by Sunset Laboratory Inc.based in USA
Our Parallel-plate Carbon Filter Denuders remove semi-volatile organic carbon vapors. Without Denuders, absorption artifacts will be present on a following quartz ...
-
Distributed by Air Sampling Devicesbased in USA
Quartz Ultra Pure 37mm disks, final stage Respicon ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you