Laboratory Ovens Equipment For Monitoring And Testing In Bulgaria
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Zeeman AAS for flame, graphite furnace and hydride technique. The flexible tandem instrument with two sample compartments for flame, hydride and graphite furnace technology, upgradeable for direct solids ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The UVP Hybridizer Oven provides uniform temperature and rotation controls for thorough mixing of materials. The unit is ideal for Southern, Northern, and Western blots; in situ hybridization; and binding nucleic acids to nitrocellulose or nylon-reinforced transfer membranes or other media. Precise microprocessor rotation speed and variable speed control settings enable consistent sample ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Cyclops L Portable pyrometers are a range of premium quality, highly accurate hand-held instruments. Ergonomic single-handed use non-contact thermometers, provide easy, accurate point-and-measure temperature ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Powerful high-end AAS devices for highly efficient and sensitive multielement analysis for research and everyday lab use. Easy to use – simple multielement analysis with no need for lamp changes. Powerful – wide dynamic range and continuous calibration. Cost-efficient – high productivity and operating costs that remain ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Application specific design, compact fast-response thermometer designed for temperature measurements on plate and float glass applications. A unique miniature radiation thermometer measuring just 28mm x 4mm, JRG/A is specifically designed to monitor temperature consistency in plate and float glass ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Compact and universal, also for small sample volumes. Valve-free direct injection technology for carryover-free work with high-temperature combustion. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A short-wavelength infrared thermometer providing precise and stable temperature measurement for control of optical fibre drawing tower furnaces. A highly accurate temperature measurement of optical fibre drawing tower furnaces, DTT is a Drawing Tower Thermometer that enables production of high quality, low loss optical fibre to the required strength and attenuation. As AMETEK Land’s ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A two-sensor temperature monitoring system designed to continuously measure true load temperatures in reheat furnace applications especially in the challenging heating sections. Using AMETEK Land’s leading-edge infrared sensing to measure both furnace load and background temperature, the Furnace Thermometer System (FTS) links to the advanced Landmark Graphic signal processor for a true ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The split tube furnace range HST (single zone) and HZS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters. These furnaces comprise a furnace body which is hinged and split into two halves along its length. This ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The 3508P1 controller provides programmable temperature control using up to 20 segments. Each segment may be defined as a ramp a step or a dwell. The 3508P10 controller has all of the functionality of the 3508P1 with the additional capability of being able to store up to 10 programs with 50 segments per program. The 3508P25 controller has all of the functionality of the 3508P1 with the additional ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
These compact universal split tube furnaces use free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The FST, single zone, and FZS, 3-zone, split tube furnaces can be used either vertically or horizontally and have a maximum operating temperature of 1300 °C. The split heating module allows either easy positioning of the work tube or positioning around reactors which have fixed end flanges. The split design may also allow faster cooling of the sample. Cooling channels are engineered into the ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Siemens PLC with touch screens: Most programmable logic controllers (PLC) are equipped with a touch screen. Touch screens are available in several sizes and this will depend on the furnace and application. These control systems display several pages for parameters setting, live graphical trending and alarm information. The HMI display is linked to the temperature controller(s) and a PLC ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The AAF-BAL thermogravimetric analysis (TGA) furnace incorporates an integral balance. It can be used for loss on ignition applications where weight change of the sample must be monitored during the heating process. The AAF-BAL ashing furnace is fitted with an integral balance and can be used for loss on ignition (LOI) applications. Weight change of the sample is monitored during the heating ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
With the adjustable stand option, the Carbolite Gero graphite tube furnace range up to 2600 °C can be used at various angles, ranging from horizontal to vertical. This range of cold wall tube furnaces is heated by graphite elements and insulated by graphite felt. At higher temperatures above 400 to 600 °C graphite is air sensitive and needs to be kept under either an inert gas or vacuum ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The HB top hat furnace range has an automatically operated vertically moving hood for heat treatment in air. The moving hood design allows samples to be accessed from three sides. The HB can be equipped with CrFeAl heating wires up 1300 °C or with MoSi2 heating elements for temperatures up to 1800 °C. The HB hood furnaces are available with usable volumes of 80 to 514 litres with the ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Many standard furnaces and ovens can be built to suit a clean room environment. Depending on the product type it may be necessary to locate it in the grey area and the only access to the furnace chamber would be through the clean room ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The Hydrogen tube furnace system is based on the popular HTRH 16/100/600 system. The furnace is designed to meet all required regulations for the safe handling of Hydrogen ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The ELF laboratory furnaces comprise 3 bench mounted models designed for light duty and general use up to 1100 °C. These laboratory furnaces have a simple drop down door and a top mounted ceramic chimney. The combination of low thermal mass insulation and free radiating wire elements embedded in the chamber sides provide efficient ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Mass loss during heat treatment in air: For organic matter the standard ashing furnace AAF 11/17 with balance up to 1100°C can be used for loss on ignition (LOI) applications in air. Weight change of the sample is monitored during the heating process and this is required, for example, in the determination of organic matter content in materials such as sediment, sludge, soil and waste. For ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you