Laboratory Safety Equipment For Monitoring And Testing Available In Iran
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model ZR1000 is a trace oxygen analyzer used for the measurement of trace oxygen in all types of inert environments. The ultra-fast zirconia sensor will respond from 1000 to 10 ppm in about 23 seconds, as opposed to other instruments which may take minutes to reach 10ppm. This unit is powered by an AC to 12Vdc power supply/adapter, or an optional Ni-MH rechargeable battery pack, with ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
O2 and CO2 Analyzer for research processes, gas blending, biotech, and other systems. The Model 902P O2 CO2 analyzer measures 0 to 100% O2 concentrations, and 0-1% to 0-100% CO2 vol/vol full scale, in a variety of process, research, and biotech applications. Options include internal sample pump, battery operation, analog outputs, and complete data collection option (including analysis software ...
-
PremiumManufactured by Labconco Corporationbased in USA
The Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 201 is a portable oxygen analyzer used primarily for the measurement of O2 concentration in gas flows, chambers, or gas flushed hoods (such as glove boxes). The analyzer comes with both an “open faced” fitting and a T-fitting, allowing it to be used for analyzing gas flows, or set in chambers where oxygen levels need to be monitored. The sensor operation is not ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Model 905P is a process O2 analyzer, designed to check oxygen levels in all types of processes, gas blending, biotech, fermentation, fruit storage areas, welding gases, and controlled atmosphere rooms. If you require 0-1000ppm analysis, please see our ZR1000. For those applications where a source of sample flow is not available, the 905P can be equipped with an optional sample pump which can ...
-
Manufactured by Systec GmbHbased in GERMANY
The Systec H-Series 2D double-door/pass-through autoclaves of the performance category HX can be used for all laboratory applications, even for sophisticated sterilization processes and are available in 13 different sizes with 90 to 1580 liters chamber volume. All additional optional accessories can be fitted to obtain validatable processes. For use under the most stringent clean room and safety ...
-
Manufactured by Avilo Stikstof en Persluchtsystemen B.V.based in NETHERLANDS
The Parker Balston H2PD-300 hydrogen generator produces ultra high purity hydrogen utilising a palladium purifier. With an adjustable delivery pressure between 0.7 and 4.1 this generator produces 300ml hydrogen per minute with a purity of at least ...
-
Manufactured by Arya Water Technologiesbased in INDIA
Electrodeionization is a continuous and chemical-free process that removes ionized and ionizable species from feed water. An EDI plant serves as an alternative to conventional mixed-bed polisher, as it eliminates regeneration downtime, as well as the need to handle and store hazardous chemicals like acid and lye. It is used to obtain low levels of conductivity and silica in the treated water, and ...
-
Manufactured by Laboteckbased in INDIA
Biosafety Cabinets are designed for a variety of experimental and clinical trials. Provides a clean and safe environment for experiments. The elimination of toxic and harmful particles is extremely important for the safety of the user, the environment, and the sample being studied. The biosafety cabinet has a High-Efficiency Particulate Capture (HEPA) filter and protects personnel or both ...
-
Manufactured by Fumecare Ltdbased in UNITED KINGDOM
Freestanding Downdraft Tables are designed to give operator protection while allowing complete, easy and open access to the working area. Harmful fumes and vapours are drawn downward through the stainless steel worksurface to the units filters. Clean air is then re-circulated back into the ...
-
Manufactured by Fumecare Ltdbased in UNITED KINGDOM
Dye Staining Benches are designed to give operator protection from the Ethanol dye used during the forensic process of developing latent finger prints from non-porous surfaces. The Polypropylene sink, dye storage tank, water facilities and open work surface provide the optimum environment for the efficient processing of such ...
-
Manufactured by Aadarsh Technologiesbased in INDIA
GBPI offers mask testing machines for surgical face masks, N95 masks, Melt-blown fabric. BFE Tester, PFE Tester, N95 Tester, Melt-blown fabric ...
-
Distributed by ULPA Clean Room & Laboratoriesbased in ISRAEL
The company markets safety lockers for the storage of chemicals and gas manufactured by MOMOLINE Italy. These lockers are essential in any type of laboratory in order to store chemicals and gases in accordance with all the requirements of the law and laboratory safety regulations. Lockers are made of metal structure coated with steel, polypropylene or PVC sheets Depending on the type of work, it ...
-
Manufactured by Labindia Analytical Instruments Pvt. Ltdbased in INDIA
These autoclaves (laboratory sterilizers) from Systec are specially developed for laboratory sterilization applications that makes processes safer, easier, accurate, reproducible and validatable. Systec autoclaves can be used in all laboratory applications, even in demanding sterilization processes: the sterilization of liquids (such as nutrient and culture media), solids (such as instruments, ...
-
Manufactured by Lab-Bubblebased in UNITED KINGDOM
The Clean Air PCR Enclosure provides a comfortable to use. easy to clean, HEPA filtered clean air workstation for the preparation of PCR reagents. The integrated UV-C Germicidal Lamp provides effective biodecontamination. ISO Class 5 Clean Air Environment, UV-C Lamp as Standard, Ergonomic Design, Pre Tested and Validated, Easy to Clean and maintain, PCR Hood is Easy to install. ...
-
Manufactured by UIC Europebased in PORTUGAL
General furnace with elevating mechanism for general laboratory uses with user safety. Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. Our system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption. ...
-
Manufactured by Qingdao Decent Groupbased in CHINA
https://www.decent-group.com/product/industrial-dust-collection-system.html Qingdao Decent Group industrial cust collection system adopts a cartridge filter pulse dust collector, which can effectively reduce the pollution of dust and harmful particles to the laboratory environment, create a safe and comfortable workplace for staff, and provide protection for the lab testing and analysis process. ...
-
Manufactured by Avilo Stikstof en Persluchtsystemen B.V.based in NETHERLANDS
The Parker Balston H2PEMPD-1300 hydrogen generator produces ultra high purity hydrogen utilising a combination of PEM cell technology and a palladium purifier. With an adjustable delivery pressure between 0.7 and 6.8 bar, or 0.7 and 11.9 this generator produces 1.300ml hydrogen per minute with a purity of at least ...
-
Manufactured by Raith GmbHbased in GERMANY
The electron beam lithography system for results at the push of a button. The VOYAGER is a dedicated high-performance electron beam lithography system which is especially suitable wherever straightforward access to electron beam lithography in multi-user facilities is needed. The fully automated and ultra-ergonomic system with smart features and innovative system architecture ensures shortest ...
-
Manufactured by Wagtech Projects Ltdbased in UNITED KINGDOM
The AquaSafe Water Safety Laboratory WSL25 Pro represents the evolution of the next generation of portable water safety laboratories. The lightweight kit has been optimised for field use. Microbiological testing has been revolutionised with our high-capacity single incubator incorporating PetriLok® technology for simplified sample handling. The novel lightweight hard anodised aluminium ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you