Laboratory Vials Equipment For Monitoring And Testing Available In Cuba
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
MATi 4 is a fully automated system for coulometric KF titrations with high sample throughput. Up to 160 samples in 6 mL vials can be placed on the sample rack of the Sample Processor. The sample is pipetted into an external coulometric cell and then titrated there. The system is controlled with the OMNIS software. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 860 KF Thermoprep is designed for thermal sample preparation in Karl Fischer titration. Numerous substances cannot be analysed by direct Karl Fischer titration as they are not soluble, react with the Karl Fischer reagent or release their water only very slowly or not until heated to high temperatures. Using tightly sealed sample vials, the sample is inserted in the oven. The samples can be ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Compact all-in-one volumetric or coulometric Karl Fischer titrator for routine water content determination. KF Ti-Touch titrators offer all you need for routine water content determination in a compact and easy-to-use system. KF Ti-Touch is available as a volumetric system for determining water contents above 0.1% or as a coulometric system for low water contents down to ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The technique used to fill a VOA vial is at least as important a source of variance in VOC analysis as is well purging protocol or sampler design. The more the sample stream is agitated or exposed to the air during the transfer of sample from the bailer to the vial, the lower the concentration detected in the vial will be. The greatest loss of VOC's occurs when the sample is simply poured into ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
1.5" HDPE VOC tips 24 units per box. The technique used to fill a VOA vial is at least as important a source of variance in VOC analysis as is well purging protocol or sampler design. The more the sample stream is agitated or exposed to the air during the transfer of sample from the bailer to the vial, the lower the concentration detected in the vial will be. The greatest loss of VOC's occurs ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm Instant Raman Analyzer (MIRA) P is a high-performance, handheld Raman spectrometer used for rapid, nondestructive determination and verification of different material types, such as Pharmaceutical APIs and excipients. Despite the small size of the instrument, the MIRA P has a ruggedized design and features a high-efficiency spectrograph design equipped with our unique ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model C14CS-3000E Tritium Collection System is a carbon 14 collection system consisting of a diaphragm pump, 12VDC brushless motor, two 500ml NaOH sampling vials with stainless steel caps and an overflow trap. The flow and volume of air passing through the system is adjusted and measured by a microprocessor controlled Digital Flow Meter (DFM). The DFM utilizes a precision-machined orifice to ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
FerroCheck 2000 Series is a precision ferrous metal analyzer for field service professionals and oil labs. The FerroCheck 2000 Series of portable ferrous analyzers offer accuracy and convenience for total ferrous measurement of in-service lubricating oil and grease. Fast and easy to use samples are analyzed in less than 30 seconds. Small sample volumes of just 1.5 ml of oil or 0.75 ml of grease ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 50 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 50 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a CO2 ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Rapid, nondestructive analyses of solid and liquid substances. The NIRS XDS RapidContent Analyzer enables rapid, nondestructive analyses of solid powders, coarser granulates, pellets or flakes. Composition or material identification testing is performed either in the laboratory or at-line, on samples contained in their original packaging, bags or vials. An optional variable spot-size feature ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The technique used to fill a VOA vial is at least as important a source of variance in VOC analysis as is well purging protocol or sampler design. The more the sample stream is agitated or exposed to the air during the transfer of sample from the bailer to the vial, the lower the concentration detected in the vial will be. The greatest loss of VOC's occurs when the sample is simply poured into ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 250 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 250 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Instant Raman Analyzers (Mira) are robust and reliable portable spectrometers for material identification and verification. These instruments combine ease of use with maximum safety and provide results within seconds. Using ORS, Mira systems yield highly reliable results, giving you more confidence in your ...
-
PremiumManufactured by Labconco Corporationbased in USA
The RapidVap Vacuum Evaporation Systems are ideal for preparation of samples in a variety of applications including drug discovery, agrichemistry, mycology testing and environmental analysis. The systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. These systems may be used with a broad range of ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
1.5" HDPE VOC tips 24 units per box. The technique used to fill a VOA vial is at least as important a source of variance in VOC analysis as is well purging protocol or sampler design. The more the sample stream is agitated or exposed to the air during the transfer of sample from the bailer to the vial, the lower the concentration detected in the vial will be. The greatest loss of VOC's occurs ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The technique used to fill a VOA vial is at least as important a source of variance in VOC analysis as is well purging protocol or sampler design. The more the sample stream is agitated or exposed to the air during the transfer of sample from the bailer to the vial, the lower the concentration detected in the vial will be. The greatest loss of VOC's occurs when the sample is simply poured into ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The MRB500H3E Tritium Bubbler is the state-of-the-art discriminating tritium collection instrument. Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethylene glycol, which retain the HTO component. The sample gas, now less the tritiated water vapor, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The technique used to fill a VOA vial is at least as important a source of variance in VOC analysis as is well purging protocol or sampler design. The more the sample stream is agitated or exposed to the air during the transfer of sample from the bailer to the vial, the lower the concentration detected in the vial will be. The greatest loss of VOC's occurs when the sample is simply poured into ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm Instant Raman Analyzer (MIRA) M-3 is a high performance, handheld Raman spectrometer used for rapid, nondestructive identification and verification of different material types, such as Pharmaceutical APIs and excipients. Despite the small size of the instrument, the M-3 has a ruggedized design and features a high-efficiency spectrograph design equipped with our unique ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you