Only show results in Connecticut? Ok

Lead (Pb) Monitoring Applications

  • Premium

    Laboratory instruments solutions for chemical industry

    Converting raw materials into more than 70 000 different products that are used in almost all industries, the chemical industry lies at the core of the global economy and, perhaps, modern civilization. There is hardly any industrially produced good that would exist without the chemical industry, all the more considering that it was not until the 19th century that chemistry, particularly organic chemistry, exploded with Wöhler’s urea synthesis. Within just a few decades, numerous important industrial...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    RoHS analysis in electronic equipment

    The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges. For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at hand.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Laboratory instruments solutions for surface finishing industry

    The coating and finishing of surfaces using electroplating techniques is a highly sophisticated process. Be it the finishing of metal parts or the coating of printed circuit boards, the quality required in the intermediate and end products is only achieved if the composition of the process baths is right. At the same time, rising costs of raw materials and energy make it absolutely essential to drive production as efficiently as possible. As a leading manufacturer of instruments for chemical analysis we know...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Shredders and crushers for screenings

    The screenings cause considerable problems during disposal. In its untreated state, it is very moist and still contains a considerable proportion of easily degradable organic matter, which can lead to unpleasant odours due to spontaneous decomposition processes. In a sewage treatment plant, pieces of wood, plastic foils and other heavy materials are fed in via the waste water inlet. These are collected with the screenings in front of the screens and are then removed from the waste water stream during the screen...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Chemical oxygen demand (COD) analyzer for government and academic solutions

    PeCOD® is the only Chemical Oxygen Demand (COD) analysis technology to use the powerful UV-activated nanoparticle TiO2 (titanium dioxide) photocatalyst which is at the core of the system. The high electrochemical potential of the TiO2 gives it a substantial advantage over the modest chemical potential generated by the dichromate method. The UV light creates a photohole in the TiO2 sensor with a very high oxidizing power and organics in the cell are oxidized. PeCOD® is extremely accurate across a broader...

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Premium

    Elemental Analysis for Petroleum & Petrochem by EDXRF / XRF

    The low-cost Rigaku NEX QC benchtop EDXRF delivers compliance with the ASTM D4294 sulfur method (also methods: ISO 20847, ISO 8754, IP 496, IP 336, and JIS K 2541-4) with an easy-to-learn software interface in a robust package specifically designed for the petroleum industry. Optimized for routine determination of sulfur in petroleum, including crudes, heavies, bunker fuel and for upgrading operations, the instrument features an intuitive and modern "icon-driven" touch screen, Smartphone-style interface for easy...

    By Applied Rigaku Technologies, Inc. based in Austin, TEXAS (USA).

  • Premium

    Anaerobic water purification systems for sulphate removal/recovery

    Sulphate is a common chemical in industry.

    By Paques Technology B.V. based in EL Balk, NETHERLANDS.

  • Premium

    PID sensors for OEMs industry

    Ion Science leading PID sensors are recognised around the world by original equipment manufacturers for their longevity, stability and critically their resistance to humidity, so are ideal for deployment across a wide range of testing environments and diverse applications.

    By Ion Science Ltd. based in Royston, UNITED KINGDOM.

  • Premium

    Continuous emissions monitoring solutions for special applications CEM

    OPSIS is a world-leading supplier of CEMS (continuous emissions monitoring systems) for various special applications in the industrial emissions sector. The OPSIS gas monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive CEM systems. We also provide additional products and services, including dust and...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Pressure sensors for gas industry

    Thanks to their high measuring accuracy and outstanding long-term stability, STS sensors are market-leading when monitoring and metering local distribution networks and gas stations.

    By STS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND.

  • Premium

    Gas analysis instruments for industrial gases

    Servomex has set the standard for gas analysis in the Industrial Gas (IG) market for the last 60 years. From air separation to gas bottling and transportation, we've pioneered monitoring technologies and ground-breaking systems solutions that deliver accurate sensitivity, unparalleled performance and reduced cost of ownership.

    By Servomex - a Spectris Company based in Sugar Land, TEXAS (USA).

  • Premium

    Innovative gas measurement solutions for laboratory research industry

    Chemical, biotech and research laboratories perform a wide range of applications and tests. Many of these can be impacted by the presence or absence of oxygen, and, thus, require the use of oxygen analysis to measure or monitor oxygen levels. There are applications and tests that require keeping oxygen at a predetermined level or within a predetermined range so as not to invalidate the results. For example, many procedures require the use of a glove box to maintain a controlled environment. But it is not always...

    By Advanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA).

  • Premium

    REMOTOX for soil and groundwater remediation applications

    Chromium, Zinc, Copper, Lead, Cadmium, Mercury and Arsenic are among the most common metal contaminants found on clean-up sites. REMOTOX® precipitates these highly soluble metals as less soluble, less toxic metal sulfides. Hexavalent chromium is reduced to trivalent state and precipitated as chromium hydroxide in a one-step process.

    By Graus Chemicals, LLC based in Carefree, ARIZONA (USA).

  • Premium

    Machine condition monitoring for military & aerospace

    Overview Machine condition monitoring based on oil analysis has become an essential maintenance practice of military organizations throughout the world. An effective oil analysis program will keep important military assets such as planes, ships, tanks, trucks, and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime. Mission readiness of military equipment is paramount, and proper maintenance can also decrease the long-term expense by minimizing replacement...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Ultraviolet disinfection systems for the USEPA UVDM validation

    For drinking water applications, atg UV Technology`s independently 3rd party validated UV systems are sized to deliver both 40 mJ/cm2 RED UV Dose, or a 3 log (99.9%) to 5 log (99.999%) reductions of Cryptosporidium. As a leading testing and validation protocol, the United States Environmental Protection Agency (US EPA) Ultraviolet Disinfection Guidance Manual (UVDGM) 2006 provides an advanced testing and validation method for guaranteeing UV disinfection performance for a large range of operating conditions, such...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Process monitoring solutions for special applications processes

    OPSIS is a world-leading supplier of gas monitoring systems for various special applications in the process control sector. The OPSIS process monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive process control systems. We also provide additional products and services, including dust and flow meters,...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    REMOTOX for heavy metal capture in incineration flue gas applications

    REMOTOX® has proven to remove high levels of mercury from scrubber solutions preventing re-emissions. Additionally, it has proven to capture and stabilize lead, copper, thallium, cadmium, nickel, zinc, iron, silver and other metals commonly found in power plant waste and scrubber wastewater.

    By Graus Chemicals, LLC based in Carefree, ARIZONA (USA).

  • Premium

    Monitors and analysers for Aluminium industry

    AMETEK Land makes integrated thermometer systems designed solely for the temperature measurement of aluminium. Our products meet the highest standards of quality and reliability to ensure accurate performance under plant operating conditions.

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Premium

    Water monitoring systems for school boards

    Achieve water conservation and efficiency goals with real-time monitoring and analytics.

    By Alert Labs Inc. based in Kitchener, ONTARIO (CANADA).

  • Premium

    Water Treatment in Soil and Groundwater Contamination

    Several industries and industrial processes may contribute to soil and groundwater contamination. AdEdge Technologies has supplied filtration equipment for several remediation efforts to remove arsenic, lead, and other inorganic contaminants to meet state and federal mandates.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you