Only show results in Virginia? Ok

Leak Detection Equipment

  • Model T200.L / ET-520, ET-521 - Leak Detector

    The T-200.L (24 V) leak detectors are approved by “DIBt” on the basis of “WasBauPVO” for the detection of leaking fluids which constitute a risk to water. The T-200.L (24 V) leak detectors can be used as leak detectors in the space between a tank and its accompanying drip tray. The evaluation device ET-520 [KR-24V] or ...

    By E.L.B. Füllstandsgeräte Bundschuh GmbH & Co. KG based in Bensheim, GERMANY. from Leak Detector Product line

  • GasCheck Tesla - Handheld Helium Leak Detector

    GasCheck Tesla is a highly sensitive helium leak detector designed for effective use within high magnetic fields found around the outside of Magnetic Resonance Imaging (MRI) scanners. The instrument's advanced micro thermal conductivity sensor provides rapid, accurate measurement of helium leaks down to ultra-low levels.

    By Ion Science based in Fowlmere, UNITED KINGDOM. from Gas Check Leak Detectors Product line

  • HUNTER - Model H2 - Gas Detection Device

    Gas detection device for easily locating even the smallest leaks in water and heating systems. The correlation and electro-acoustic methods are often used to detect and locate leakages. But for some reasons certain leakages are not detectable with this methods. For the locating of e.g. very small leakages the application of tracergas is an ...

    By Esders GmbH based in Haselünne, GERMANY. from Water Leak Detection Product line

  • Waterlogic - Leak Controller

    Upon sensing moisture, the battery operated Leak Controller engages a shut-off valve and sounds an alarm, making the ideal water leak detector. The water source is shut off, stopping the flow while the alarm continues to sound until the valve is manually reset. It comes with 1/4″ or 3/8″ pushfit connectors. We put an end to water ...

    By Waterlogic International Ltd based in Basingstoke, UNITED KINGDOM. from Essentials Product line

  • Model LDT-890 & LDT-890\AF - Leak Detector Testing System

    New Model: The LDT-890\AF is designed for today’s 'Bio' fuels. While typical blends of Ethanol and Methanol through 20% concentration are fine for the standard LDT-890, higher concentrations and Biodiesel blends above 5% will shorten the service life of the standard LDT-890. The LDT-890\AF is recommended for Ethanol and Methanol blends above ...

    By Vaporless based in Prescott Valley, ARIZONA (USA). from Leak Detector Testing Equipment Product line

  • INFICON - Model UL5000 - Dry Helium Leak Detector

    The INFICON UL5000 Helium Leak Detector is designed to meet the most critical and demanding leak detection applications. Featuring INFICON proprietary software algorithms I-CAL and Hydro-S in a field-proven vacuum design, the UL5000 provides testing flexibility, high sensitivity and quick accurate results making any leak detection application fast ...

    By INFICON based in East Syracuse, NEW YORK (USA). from Leak Detectors Product line

  • Model LD5200 - Distance-Read Controllers

    Protecting a facility from damaging leaks is an important part of any disaster mitigation plan.  The  LD5200 pairs superior leak detection technology with an easy-to-use interface.  This integration helps users quickly and efficiently establish a distance-read leak detection system that reliably protects valuable assets.

    By RLE Technologies (RLE) based in Fort Collins, COLORADO (USA). from Liquid & Water Leak Detection Equipment Product line

  • LEAKlog - Model PA1 - Acoustic Leak Detector

    Research into the typical signals emitted by high pressure leaks led to the development of a highly sensitive directional ultrasonic detection sensor. Background noise such as from an ROV is filtered out, so that only the ultrasonic signals in the band of interest are monitored and analysed. The LEAKlog PA1 acoustic sensor operates alongside ...

    By Aquatec Group Ltd based in Basingstoke, UNITED KINGDOM. from LEAKlog Product line

  • JA Envirotanks - Belowground Double Skinned Storage Tanks

    JA Envirotanks Belowground Double Skinned Storage Tank is the current recommendation for the storage of Hazardous fuels and chemicals below ground level, offering continuous protection to the surrounding environment. The inner tank is generally manufactured in accordance with BS EN 12285-1 With it's unique Leak Monitoring System the double skinned ...

    By JA Envirotanks based in Birmingham, UNITED KINGDOM. from Cylindrical Tanks - Belowground Product line

  • Model LD-8 - Leak Survey Tool

    The new LD-8 Leak Survey Tool is designed specifically for “water leak surveys” done by water departments, water districts, and other government and private agencies concerned about “unaccounted-for water losses.”

    By SubSurface Leak Detection, Inc. based in Incline Village, NEVADA (USA). from Water Leak Detector Product line

  • Conductive HDPE Liners

    Conductive HDPE liner is a 100% spark-testable, premium grade, high density polyethylene (HDPE) geomembrane liner. specially formulated using polyethylene resins and is a coextruded product. The lower surface of Conductive HDPE is a thin layer of polyethylene containing electrically conductive carbon black. This allows for the easy and efficient ...

    By Agru Ireland Ltd. T/A Lining Tech based in Tramore, IRELAND. from Geomembranes Product line

  • Model X76CTM - Continuous Tank Monitoring

    The Ronan Model X76CTM Continuous Tank Monitoring System provides state-of-the-art and highly reliable supervision for hydrocarbon fuels, chemicals and other liquids stored in underground and aboveground single or double wall tanks. The continuous leak detection, volumetric measurement for inventory management, remote communication, local display ...

    By Ronan Engineering Company based in Valencia, CALIFORNIA (USA). from Leak Detection Product line

  • Model OSP - Optical Leak Detection Sensor

    This Sensor has been designed to detect the presence of any liquid including water, fuel oil etc. and energise an internal relay to provide a signal to existing alarm systems, Building Management Systems or SMS messaging systems. Floor standing sensor with height adjustment, can be screwed or stuck to the floor or drip tray. A wall mounted version ...

    By CMR Electrical Ltd based in Ukfield, UNITED KINGDOM. from Fuel Oil Leak Detection Product line

  • Oil Leak Detection Sensor

    Our OSPW oil leak sensor has been designed for outside use or in areas that can become wet. The Sensor includes two liquid detectors one looking for conductive liquids (water) with the other looking for non-conductive liquids such as fuel oil etc.

    By CMR Electrical Ltd based in Ukfield, UNITED KINGDOM. from Fuel Oil Leak Detection Product line

  • Pipe Leak Diverters and Pipe Repair

    Put occupational health and safety first with New Pig's selection of pipe leak diverters and pipe repair products. It's easy to divert water leaks and repair PVC pipe leaks with our products. Choose from pipe repair patch kits, pipe repair putty, rubber hanging straps and much more. Shop the Pigalog® catalog or buy our industrial supplies online.

    By New Pig Corporation based in Tipton, PENNSYLVANIA (USA). from Leak Diverters Product line

  • Model GSRM2 - Network Refrigerant Leak Detector

    Designed for situations where personnel safety could be compromised by a leak of refrigerant gases, the GSRM2 provides continuous monitoring from a network of dedicated sensors around your refrigeration plant and working spaces.

    By Parasense Limited based in Quedgeley, UNITED KINGDOM. from Refrigerant Leak Detectors – Commercial Product line

  • ChlorSafe - Model 276 - Corrugated Chlorine Transfer Assembly

    Hose Master’s 276 alloy, corrugated chlorine-transfer assembly, designed to meet the demands of this application. With considerations made for both wet and dry chlorine, these assemblies are the safest available. ChlorSafe™ assemblies are manufactured in compliance with the Chlorine Institute Pamphlet 6, Appendix A, latest edition.

    By Hose Master LLC based in Cleveland, OHIO (USA). from Corrugated Metal Hose Product line

  • BARTEC - Water Leakage Detection System

    Water leak monitoring in buildings with sensitive electric and electronic equipment or valuables is today an elementary part of building supervision and guarding. The BARTEC water leakage detection systems are used for the surveillance of rooms, piping and individual items. Each leakage is detected with metre accuracy and reported directly in the ...

    By BARTEC GmbH based in Bad Mergentheim, GERMANY. from Water Detection - System Overview Product line

  • Eurovac - Model LAZ-04 - Leak Detection System

    The Eurovac LAZ-04 Leak Detection System is designed to monitor the interstitial space of double skin steel or GRP non-pressurised storage tanks. Tanks must be located in safe areas, either above or below ground.  A -500mbar vacuum is generated in the tank interstitial space via an internal pump.  Leaks in either the inner or outer skin ...

    By Afriso Eurogauge Ltd based in Crawley, UNITED KINGDOM. from Storage Tank and Pipework Leak Detection Product line

  • a1-cbiss - Model RMS8000 - Refrigerant Gas Leak Detection System

    Fixed refrigerant leak detector, robust, easy to use and cost effective. The a1-cbiss RMS8000 offers a robust, easy to use, cost effective approach to providing an effective refrigerant gas monitoring system. The RMS8000 is used to monitor concentrations of carbon dioxide (CO2, ammonia (NH3) or combustible gases in refrigeration applications where ...

    By a1-cbiss based in Birkenhead, UNITED KINGDOM. from Refrigerant Leak Detection Solutions Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you