Locating System (Leak Detection) Equipment
-
Manufactured by Dantherm GmbHbased in GERMANY
LSK-200 leakage locating system case: Technique for pros - complete and compact. The LSK-200 combines conventional measuring methods, is compact in design, and at a reasonable price. The attractive entry-level pack for all restoration service ...
-
Manufactured by Pipa Ltdbased in UNITED KINGDOM
The system operates by using a unique cabling technique for long distance pipe leak detection without the requirement of water flow within a pipeline. Internal acoustic technology is fast becoming the most reliable technique of accurately tracing leaks on all material pipelines. The Pipepod Hydrostatic is a failsafe for all new pipe ...
-
Manufactured by PermAlert, a division of Perma-Pipe, Inc.based in USA
PAL-AT is a versatile leak detection controller with advanced features that can detect leaks for a wide range of applications for water, corrosive liquids and hydrocarbons. The PAL-AT can operate as a standalone leak detection system, as part of an enterprise solution of multiple networked PAL-AT systems monitored by PALCOM ...
-
Manufactured by Ferret Technology Ltdbased in UNITED KINGDOM
Dimensions (mm): Height 390mm, Length 370mm, Width 245mm. Weight (Dry): 17.2Kg. Body Material: Aluminium ...
-
Manufactured by TTK S.A.S.based in FRANCE
The FG-ALS4-OD, Four Zones Alarm & Locating System Unit is designed to be used with FG-OD hydrocarbon range of products, to give instant detection and location of liquid (non-conductive hydrocarbon liquids and solvent). In the event of liquid leak or default on the sense cables for each zone, the responses from the FG-ALS4-OD alarm & ...
-
Manufactured by TTK S.A.S.based in FRANCE
The FG-ALS8-OD, Eight Zones Alarm & Locating System Unit is designed to be used exclusively with FG-OD range products including sense cables and point sensors, to give instant detection and location of liquid (non-conductive hydrocarbon liquids and solvent). Capable to monitor up to 8 oil leak sense cables or point sensors on its 8 ...
-
Manufactured by LeakTronicsbased in USA
F.L.A.S.H. stands for Frequency Location And Sound Hybrid. LeakTronics patented F.L.A.S.H Leak Locating System finds leaks from within lines and transmits a signal at the leak’s precise location. F.L.A.S.H. technology can be used to locate leaks, pipe separations or cracks in swimming pool and spa plumbing, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Electrodynamic filter damage and leakage monitoring of industrial multi chamber filter systems: proactive multi chamber filter monitoring, identification of upcoming filter damages, identification of the filter chamber affected by filter breakage, reduction of material-, downtime- and maintenance costs, flue-gas temperatures up to 150 ...
-
Manufactured by Gaussan Inc.based in USA
Gaussan Leak Sentry 8100 is a unique always-on leak detection system that monitors any change in the moisture content of the roofing assembly. This leak detection and location system with electronic sensors located in the the roof assembly envelope uses electric signals and a sensor grid to locate ...
-
Manufactured by Hurco Technologies, Inc.based in USA
Laboratory tested safe LiquiSmoke is the fastest and most economical way of locating leaks in pipeline systems. Smoke filled air is forced through the system, quickly revealing problem ...
-
Manufactured by Hurco Technologies, Inc.based in USA
Our Power Smoker 2 smoke testing machine with laboratory tested safe LiquiSmoke is the fastest and most economical way of locating leaks in plumbing systems. Smoke filled air is forced through the plumbing system, quickly revealing problem ...
-
Manufactured by Apex Vacuum LLCbased in USA
Hydrogen leak detectors are used for applications in determining leak locations in systems containing hydrogen. It accomplishes this by leaks using a tracer gas of 5% hydrogen/95% nitrogen. This mixture is a non-combustible, green label gas. Our TLD.1000 and TLD.500 Hydrogen Leak Detectors use a semiconductor type chip technology to ...
-
Manufactured by E2L Products Limitedbased in UNITED KINGDOM
Used as both a safety device and a fault finding tool throughout the electricity industry, the ULTRASCAN spark and corona detector provides instant indication of the presence of electrical discharges in electrical plant. It is widely used for the identification of insulation failures, loose busbars and other MV and HV connections, and any general fault condition in and around switchgear. ...
-
Manufactured by Sensor, spol. s r.o.based in SLOVAKIA
Sensor DDS LAM is the entry level alarm system for installation in conjunction with a FIXED system. Utilising tried and tested industrial technology it is a robust and effective solution brought to you at a low relative cost. LAM panels can be sited inside or outside and can be supplied with UPS battery backup to prevent down time in the ...
-
Manufactured by Aquilar Ltdbased in UNITED KINGDOM
is located and repaired, the cable will quickly dry and be ready for re-use. TT1100–OHP is a distributed sensor that can be attached to the bottom of suspended piping with nylon tie–wraps. There is no need for a drip tray to bring water into contact with the sensor cable ...
-
Manufactured by Sensor (UK) Limitedbased in UNITED KINGDOM
Sensor DDS LAM is the entry level alarm system for installation in conjunction with a fixed system. Utilising tried and tested industrial technology it is a robust and effective solution brought to you at a low relative ...
-
Manufactured by TTK S.A.S.based in FRANCE
The FG-ALS4 is an innovative and cost effective solution for water leak detection and acid leak detection. It is accurate and easy to install and to use, ideal for small and medium applications where accurate leak location is required. Four detection zones are available on this small unit, it can control up to 45 metres of water or acid ...
-
Manufactured by Aquilar Ltdbased in UNITED KINGDOM
TraceTek TT1000 sensing cables detect the presence of water at any point along their length. Installed with a TraceTek alarm and locating module, the cable senses water intrusion, triggers an alarm, and pin-points the location. The cable is available in a variety of lengths to provide as much coverage as needed. TT1000 sensing cable is ...
-
Manufactured by Aquilar Ltdbased in UNITED KINGDOM
The AT-DTP Drip Tray Probe is designed for use with all AquiTron and TraceTek leak detection systems. The probe is fully compatible with TT1000 system components and can be integrated into TraceTek and AquiTron water detection systems, wither with or without sensor cable, to provide a versatile sensing ...
-
Manufactured by Benthowave Instrument Inc.based in CANADA
BII's continuous/discrete line array hydrophones are designed for use in detection and search of sound sources underwater, passive SONAR, listening systems, near-field measurement and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you