Leak Testing Equipment For Monitoring And Testing Available In Louisiana
-
ShowcaseManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Concept ALTS was developed by Concept for the Royal Air Force to enable the fast and accurate leak testing of its wide-bodied aircraft. The ALTS produces a sub-micron, non-contaminating, artificial smoke (entrained in inert carrier gas) in the aircraft fuselage, utilising the aircraft’s own 115v 400-450 Hz supply. The unit will also operate on 50 Hz. The unit uses the same chemical ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE-LASER-100P The portable laser gas analyzer is composed of a gas analyzer main unit, an integrated heat tracing line, and an extendable probe. The sample gas is sampled and analyzed by a high-temperature heat extraction technique. Under the action of the sampling pump, the gas to be tested enters the gas analyzer main unit to analyze the gas chamber through the front-end filter element and the ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Vehicle-based solution for the network inspection of underground gas pipes:economical – laser-based – fully automatic. The LaserGasPatroller is a vehicle-based solution for the economical network inspection of underground gas pipes. Gas leaks are detected when the laser-based measuring system LGP 800 is driven over the gas pipes. The LGP 800 is operated by the SeCuRi SAT software ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to air and compressed air flow metering. It is the first, and currently only, thermal mass flow meter to meet SIL 2. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. Additionally, for applications benefiting from a high or low flow alarm point, the ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
Stainless steel sensor leak testing, pipeline monitoring. The digital pressure gauge DL01 is a precision device fulfilling highest demands. It was conceived especially for leak testing or pipeline monitoring. The advantage of the DL01 is that it consists of two devices - the digital display and the pressure transmitter -which can be combined without any ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The resulting smoke from the ViCount is extremely persistent, depending on the grade of Smoke Oil selected, the smoke produced by the ViCount can persist to 200°C (compared to typical water based smoke systems 40-50°C) before layering / evaporation commences, making the unit ideally suited to hot fire training applications. It is also used during carbonaceous burns to top up smoke levels ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Principle : ESE-LASER-HCL-200P Portable laser gas analyzer using a Tunable Diode Laser Absorption Spectroscopy (TDLAS), the realization of the non-contact measurement in high temperature, high pressure, high dust and other harsh test conditions. High selective laser based on frequency, analyzer has good performance of anti interference. compared to the traditional analysis method, reducing the ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 316-3 is our best refrigerant leak detector yet, and delivers dependable, rugged performance at a great value. The heated diode sensor provides sensitivity down to 0.15 ounces/year including the new refrigerant blends like R-410A, R-407C, and R134-a, allowing you to quickly locate refrigerant leaks. Just turn it on and start getting readings immediately. Thanks to automatic zeroing, the ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The intelligent network patrol for maximum safety of networks. A leakplotter vehicle basically consists of the following components: the suction unit with bells for collecting samples, the measuring technology with FID and oxidiser, the notebook with the software controlled operating and documentation unit, and the option for GPS documentation along with the test set for automatic adjustments. ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
Ultra-sensitive universal refrigerant leak detector Detects all CFC, HFC and HCFC refrigerants as low as 0.006 oz/yr, including R-410a and R-507. Dual power options allow battery operation for the best mobility or wall power for uninterrupted usage. Visual and audible indicators include an incremental flashing LED in the probe tip, an internal speaker and a headphone ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers. We build these chambers with a chamber volume of up to 50 m³ as standard. This allows for reliable testing of even larger units and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
Manufactured by FLIR Systems Inc.based in USA
The FLIR GF304 detects refrigerant gas leaks without interrupting or shutting down operations in food production, storage and retail; pharmaceutical; automotive; and air conditioning. Detecting refrigerant gas leaks early can save on costly replenishment and limit environmental impact. Refrigerant gases are highly toxic, environmentally harmful and heavily regulated. Leaks gone unchecked are ...
-
Manufactured by Tiger-Vac Inc. (USA)based in USA
Legally certified explosion proof/dust ignition proof. Less than 10 Ohms of resistivity. Electrically operated. HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA Vacuum Cleaners are Aerosol Leak Tested before leaving our facility. Lightweight and portable. Low profile. The smallest ...
-
Manufactured by Axetris AGbased in SWITZERLAND
Axetris’ laser gas detection modules are stand-alone, ready-to-use OEM subsystems for selective detection and monitoring of gases. The sensor is based on a technology called “TDLS” – or Tunable Diode Laser Spectrometry, which has proven its validity in high-end laboratory and process control applications. It uses a laser to scan the specific absorption lines of a target ...
-
Manufactured by Australian Water Engineersbased in AUSTRALIA
Flap gates, tide gates, flood gates are all common terms for a gate that prevents flow back up a pipe. AWE gates have a resilient seal on the frame. All hinge arms have dual hinge points which is a critical aspect of tight sealing. Features are noted in the recommended specification below. It should go without saying, but flap gates must work. There are many installations where AWE gates have ...
-
Manufactured by Calgon Carbon Corporation UV Technologies Divisionbased in USA
Designed for low-flow water treatment applications, prefabricated 55-gallon FLOWSORB canisters contain all the operating elements found in a full-scale adsorption system ...
-
Manufactured by American Gas & Chemical Co. Ltdbased in USA
By lowering the surface tension and increasing the wetting ability of water, a leak in a pressurized immersed vessel will generate a steady stream of tiny bubbles instead of an occasional larger bubble as with untreated water. Small leaks will produce bubble indications that are impossible with normal water. The CIM Immersit series will not foam, will not support bacteria growth and are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you