Only show results available in Virginia? Ok

Level Monitoring Applications

  • Meteorological systems for environmental monitoring

    Climatronics has supplied meteorological systems for environmental monitoring and regulatory compliance for over 35 years. Our accurate, responsive, yet rugged sensors, coupled with high-power data loggers, provide users with the ability to make measurements on multi-level towers, multiple tower networks, and single sites, which comply with EPA, NRC, and international regulatory requirements.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Wireless industrial I/O applications for wastewater industries

    Banner Engineering`s SureCross product line offers reliable wireless industrial I/O monitoring and control solutions for most applications, including these example wireless applications for wastewater, landfills, and biomass processes.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Water Data Management Solution for Alpine Monitoring

    KISTERS has developed a specific version of WISKI with unique benefits for those monitoring Alpine Regions. Some of its advanced features include specialized calculations for measuring precipitation, snow, sediment transport and water balances in catchments.

    By KISTERS AG based in Aachen, GERMANY.

  • Premium

    Measurement and control systems for the Indicating the level - mechanically

    Depending on the regulations, a steam boiler must be equipped with one or more direct and/ or indirect level gauges. With direct level gauges, the liquid level can be seen directly through a glass or mica window. The use of a transparent level gauge with background illumination gives operating staff a clear separation between the water and steam zones even when viewed at a relatively long distance. Bicolour level gauges (black and white or green and red) are very suitable for camera transmission to the measuring station because of their special design and the intense LED illumination. With indirect level gauges, the water level is transmitted by a magnetic system to a display panel on the outside of a pipe.

    By IGEMA GmbH based in Münster, GERMANY.

  • Premium

    Measurement and control systems for the controlling the level - electronically

    Discontinuous control is used mainly in smaller steam boilers with low output since the temperature fluctuations in the boiler are fairly great as a result of irregular refilling with water. Continuous control, on the other hand, permits still more economical steam generation with high quality.

    By IGEMA GmbH based in Münster, GERMANY.

  • Premium

    Differential level transmitter for VFD pump control & flow measurement

    An Ontario municipality deploys Portable flowmeters to solve flow rate discrepancies between sewage pump station effluent and lagoon influent flowmeters. Faced with suspension of construction permits due to flow rate uncertainty, the Township of North Glengarry called on Greyline Instruments to help troubleshoot two permanently installed flow meters.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Flow Metering in Channel with Dry Weather Flume

    Application: Segmented rectangular channel, 3 m width. Part filled. Rectangular channel made of concrete. Channel with dry weather flume and side space.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Liquid Chromatography for soil consultancy

    Everyone has a responsibility to care for the environment to reduce the levels of pollution, including businesses that daily release emissions into the air and the ground. This is why we provide a full-service environmental testing service to help businesses identify problems and resolve them so they operate in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all sizes.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Cloud Software solutions for petroleum marketers & jobbers

    As a Petroleum Marketer or Jobber, you know that fuel management is your lifeblood. How well you manage your network can either create large revenues for your company, or bleed you dry. Titan software streamlines your fuel management practices and puts every dollar of fuel to work for you--fueling profits! With full visibility into your ATG network, you`ll know every level at every site at every moment of the day. This ensures you can dispatch and route efficiently, manage alarms in real-time, and take control of your critical role in the fuel supply chain. And if you have UST financial responsibility, the software helps you avoid the regulatory fines or red-tags that can stifle a growing business. In short, Titan software helps you manage it from the tank to the bank.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

  • Wireless industrial I/O applications for process control

    Banner Engineering`s SureCross product line offers reliable wireless industrial I/O monitoring and control solutions for most applications, including these examples of wireless installations for process control.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Wireless multiple parameter monitoring

    Monitoring multiple sensing points including fill level, pH, conductivity, and flow—often from varied locations in a large water treatment plant—can be a challenge. With four analogue inputs, a single SureCross Node can easily centralize and transmit critical monitoring information from multiple Sensors or controllers. Banner’s unique power management capability enables a single Node equipped with a FlexPower™ optimized QT50U or T30UX ultrasonic analogue sensor (level detection) to operate for years on a single DX81 battery power supply.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Wet gas monitoring for refineries

    Thermal mass flow meters provide excellent measurement capabilities in dry gas flows. They have proven durability, accuracy, and repeatability. However, thermal flow meters are sensitive to liquid droplets in a wet gas stream. For a thermal flow meter to work accurately in a condensing gas environment, the probe must be placed far enough downstream so that the entrained water has condensed onto the pipe wall. In a very wet environment, any condensing liquid (commonly referred to as mist or fog) contacting the sensor probes causes a high reading due to the liquid vaporizing on the heated portion of the sensor. As a result of this deficiency, measurements with conventional thermal meters are largely ignored when moisture levels rise because there is no confidence that the measurements are true.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Noise Monitoring

    Airport noise monitoring often requires a combination of short term measurements to gather information along with long term measurements to maintain compliance with agreed noise levels. Cirrus Environmental has a range of noise measurement instruments that have been purpose designed for these tasks along with the NoiseHub software package.

    By Cirrus Environmental based in Peterborough, UNITED KINGDOM.

  • Industrial solutions for water monitoring

    Water monitoring involves many different activitites, from ensuring the quality of surface or underground water, both for human beings and animal life, to the monitoring of a country’s water infrastructure. Wireless sensor networks are becoming increasingly popular in this area and ADVANTICSYS has already explored its use for many novel applications.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Wireless industrial I/O applications for the oil and gas Industry

    Banner Engineering`s SureCross product line offers reliable wireless industrial I/O monitoring and control solutions for most applications, including these examples of wireless installations for the oil and gas industry.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Premium

    Measurement and control systems for the Limiting the level - electronically

    A distinction is made between low water (LW) and high water (HW) limiters. Whereas LW limiters are in principle required for the safe operation of a plant in accordance with European regulations, HW limitation (overfill protection) is required only in accordance with TRD 604 for 72-hour operation.

    By IGEMA GmbH based in Münster, GERMANY.

  • Premium

    Measurement solution for ambient air workplace monitoring

    Protea can supply fixed workplace monitoring systems that can measure single or multi-points about the workplace. Specifically designed analytical systems can ensure detection limits down to ppb levels can be achieved for multiple gases with a single instrument. Controlling software can run automatically, providing instantaneous or time-weighted average readings.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Level indicating transmitter for swimming pool level control

    A Surge Tank is used at the Okatokes Rec Centre Swimming Pool to regulate pool level. By monitoring level in a surge tank the non-contacting Greyline LIT25 Level Indicating Transmitter controls makeup water flow through a solenoid valve.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Nitric Acid Production Emissions Analysis

    The Procal 2000 emissions analyser measures Oxides of Nitrogen for process control purposes, typically upstream of the N2O abatement reactor where typical pressures can be as high as 10 barg.  The analyser can be supplied in both in situ and extractive configuration to suit customers’ requirements.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Sewer Meter -

    Sewer Meters monitor sewage level and flow within the sewers. Benefits gained by sewer monitoring include: (1) Detection of overflow conditions before overflow occurs thereby preventing hazardous environmental events. (2) Detection of blocked sewer pipes, allowing quick and focused maintenance thereby reducing maintenance costs. (3)Detection of over-used and under-used pipes for long term municipal planning. (4) Monitoring of sewage flow in sensitive sites such as flow to the river or sea. (5) Estimation of sewage flow for costing purposes and especially for pricing the use of public infrastructure by industrial plants. The sewer meter solution consists of two main components: (1) The fielded component includes GaugerGSM, an ultrasonic non-contact level sensor integrated with GSM cellular transmitter. The fielded component also includes accessories such as external battery pack. (2) A web-based monitoring application for presenting data from all sewer sites.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you