Level Probes Equipment For Monitoring And Testing Available In Tuvalu
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The level transmitter LMK 307 is designed for continuous level measurement in water or waste water applications. Basic element is a flush mounted ceramic sensor. Suitable for all fluids which are compatible with media wetted materials. Different cable and elastomer matierals can be offered according to the customer-specific operating conditions. Features: - nominal pressure: 0 ... 4 mH2O up to 0 ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Our water level meters are accurate and reliable meters designed for fast, easy and reliable measurements of water levels (and optionally the temperature as well) in wells, piezometer standpipes, bore holes, observation tubes, tanks and in open water. Its sturdy design makes it a reliable tool suitable for intensive use and is easy to repair in case it might break ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. For level measurement in river courses, on weir systems or in locks, great emphasis was placed on overvoltage / lightning protection. In addition, the cable can be protected against bites if ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The LMP 308i is designed for continuous fill level and level measurement of water and liquid mediums. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation of sensor intrinsic deviations from normal condions like nonlinearity and thermal error. In order to facilitate stock-keeping ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
LMP 307T for continuous level and temperature measurement . Advantage: simultaneous recording of level and temperature with separate independent signal amplification. In addition to classical signal processing of the level, an additional signal circuit independent of the level which converts the temperature signal into a 4 … 20 mA analogue signal in 2-wire technology is provided. For drinking ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe 4 - 20 mA for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell and free configurable measurement range via ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Screw-in probe stainless steel measurement cell piezo-resistive. Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water, wastewater and gases. With piezo-resistive stainless steel measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Screw-in with capacitive ceramic measurement cell. Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water, wastewater and gases. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The separable stainless steel probe LMP 308 is designed for the continually level measurement of water and thin fluids. In order to facilitate stock-keeping and mainten-ance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: - nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O - accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO - diameter 35 mm - ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
This smoke generator was designed to facilitate the observation of air movements and air tracing in many types of air flow situations, primarily in wind tunnels. The unit is easily transported, has a rapid warm up time and simple to set up and use, and produces a controllable, non hazardous smoke effect. The Concept Aerotech Smoke Wand produces a point source of smoke on the end of a 425mm long ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe DCL 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data are transferred in binary form. Basic element is a high quality stainless steel sensor with high ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Rod probe, partly PTFE insulated. Application area: For measurement of bulk solids and non-conductive liquids such as oil. A full/empty adjustment is necessary for setup. The VEGACAL 62 is a level sensor for continuous level measurement in all industries. The partly insulated probe is designed for measurement of bulk solids and can be also used in non-conductive liquids such as e.g. oil. The ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe DCL 551 with RS485 in-terface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data are transferred in binary form. DCL 551 has been designed for hydrostatic level measurement in ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For portable flow measurement: For portable ultrasonic flow measurements from slight to heavily polluted media using the Doppler principle in part filled and full pipes and channels. Measurements are absolutely necessary when it comes to assess the hydraulic conditions of sewage networks or special constructions. The importance of portable, power-independent flow meters for determination of ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe with 1” thread and 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The slimline probe LMK 306 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids. Different cable sheath materials are available in order to achieve maximum media compatibility. Features: - nominal pressure: 0 ... 6 mH2O up to 0 ... 200 mH2O - accuracy: 0.5 % ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was developed for level measurement in waste water, sludge or water courses. The ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The slimline probe LMP 305 with silicon stainless steel sensor is designed for continous level measurement in confined space conditions. Permissible media are clean or waste water and thin fluids. A piezoresistiv stainless steel sensor with low thermal error, an excellent linearity and a long term stability, is basis of LMP 305. Features: - nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O - ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The stainless steel probe LMK 382 has been designed for continous level measurement in waste water, waste and higher viscosity media. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily. Features: - nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O - accuracy: 0.35 % (opt. 0.25 %) FSO - diameter 39.5 mm - especially for sewage, viscous ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For portable and high accurate flow measurement: For portable ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you