Liquid Level Switch (Level Switches) Equipment
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI Model AS-LLS is a no moving parts, ultra-reliable level switch which detects the presence or absence of liquid or interface at the sensing location. The AS-LLS level switch is directly installed into tanks, reservoirs, sumps and gearboxes on commercial and military aircraft, as well as spacecraft, vehicles ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI provides multipoint liquid level and interface switches that include a “strip sensor” or a thermowell mounted sensing element with integral or remote electronics that provide indication of presence or absence of liquid or interface at the multiple sensor locations along the length of the element. The multipoint ...
-
Manufactured by Heinrichs Messtechnik GmbHbased in GERMANY
The KOBOLD liquid level switch NWS is designed as a 2 and 3-wire switch and can be universally used in vessels and pipelines. The NWS operates on the tuning fork principle in air at resonance frequency. A piezoelectric crystal is used for excitation of oscillations and for monitoring the actual oscillation ...
-
Manufactured by Thomas Products Ltd.based in USA
Model Item # 41401, 4800 Series - Single Level Switch. Plastic stem construction. ...
-
Manufactured by Flowline Inc.based in USA
APPLICATION: The general purpose vibration liquid level switch provides high or low liquid level detection of dirty liquids or those with light to medium coating or scaling characteristics with a 1A relay output. Media examples include wastewater, diluted caustic soda and copper sulfate. For ...
-
Manufactured by Flowline Inc.based in USA
CSA approved for use in hazardous locations, the intrinsically safe ultrasonic liquid level switch provides high or low liquid level detection of chemical, solvent or low viscosity petroleum based liquids with a 1A relay output. Media examples include hydrochloric acid, acetone and diesel fuel ...
-
Manufactured by Xian Huashun Measuring Equipment Co., Ltdbased in CHINA
, corrosion and dangerous liquid level measurement. The high frequency ultrasonic pulse produced by the probe can pass through tank wall and transmit between the tank wall and liquid, and then be reflected back. By detecting and calculating the reflective behavior, the level switch can identify whether there is ...
-
Manufactured by Thomas Products Ltd.based in USA
Double wall tanks. Containment piping. Ideal for leak detection systems. Operates down to -40°F. Positive signals. Very economical. Not affected by translucent films. Can be immersed continuously in any media compatible with wetted parts. No special controls necessary. No excitation voltage necessary. No false ...
-
Manufactured by Thomas Products Ltd.based in USA
NPT or Bulkhead With Nut And Silicone Gasket mountings. Brass or SST Stem ...
-
Manufactured by Thomas Products Ltd.based in USA
Spherical or Cylindrical 326 SST Floats. Brass or 316 SST Stem Construction. ...
-
Manufactured by Thomas Products Ltd.based in USA
Type : Liquid Level Switch. Mounting Type: 1/8" MNPT Internal Tank Mounting. UL Listed : Yes, file no. E86797. Float Specific Gravity : 0.5 S.G. Stem Length : 2.5". Mounting Attitude : Tank-side. Reed Switch : SPST 20VA Pilot Duty. Reed Switch Logic : SPST, Red-Common, Red-NO (non-polar switch). ...
-
Manufactured by Flowline Inc.based in USA
The general purpose buoyancy liquid level switch provides high or low liquid level detection of relatively clean water and chemical solutions with a 15VA reed switch output. Media examples include potable water and boric acid. The baffle body eliminates level ...
-
Manufactured by Thomas Products Ltd.based in USA
NPT or Bulkhead With Nut Mountings. Plastic ...
-
Manufactured by SST Sensing - a brand by Process Sensing Technologies (PST)based in UNITED KINGDOM
Optomax industrial glass range of liquid level switches which are often single point can operate in high pressure, high temperature, aggressive environments due to their stainless steel and glass construction while offering industrial supply voltages and outputs that can directly drive loads. The microcontroller based Optomax Industrial ...
-
Manufactured by Clark-Reliance Corporationbased in USA
; it is this change in the frequency that indicates the JMSVT to switch. With different electronic outputs to choose from, this allows you to switch a load on / off or interface directly with your PLC. A compact switch with a rugged stainless steel body for use in a wide range of liquids, JMSVT is the stock answer to your ...
-
Manufactured by Arjay Engineeringbased in CANADA
Reliable level alarm and control of liquids and solids. The sensing probe continuously monitors the level changes in a vessel to alarm at user defined set points. It is typically used to control pumps and valves, alarm of high or low product conditions, or alert to potential overflow and dry conditions. The 2852-LS sensing probe ...
-
Manufactured by Arjay Engineeringbased in CANADA
Reliable level alarm and control of liquids and solids. As a liquid or solid rises or lowers around the probe, the capacitance field changes. This is monitored and used to control the two on-board relays. Each relay includes full differential control to allow the relay to activate and de-activate between two distinct at user determined ...
-
Manufactured by Babbitt International, Inc.based in USA
The LS8000/2 dual-point level switch can measure virtually any liquid, dry material (2 probe configuration) or interface of electrically conductive or non-conductive products. The proprietary radio frequency (RF) balanced impedance bridge has exceptional temperature stability, thus eliminating the need to recalibrate the unit from season to ...
-
Manufactured by SST Sensing - a brand by Process Sensing Technologies (PST)based in UNITED KINGDOM
The Optomax digital range of liquid level switches are ideal for applications with restricted space that require a miniature, low power and low cost sensing solution. The microcontroller based sensor is solid state, incorporating an infra-red LED and phototransistor which are optically coupled by the tip when the sensor is in air. When the ...
-
Manufactured by Babbitt International, Inc.based in USA
The LS6000 is an economical, basic feature point level switch that can sense a wide range of liquid and dry materials. Its robust design and durable Delrin insulator make this unit well suited for use in dry materials, such as powders, sand, aggregate, grain or other bulk solids. Unlike rotating paddles, vibrating forks or other ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you