Magnetostrictive Level Transmitter (Level Transmitters) Equipment
-
Manufactured by Orion Instruments, a brand of AMETEKbased in USA
The Jupiter JM4 liquid level transmitter is a loop-powered 24 VDC liquid-level transmitter and is available as a direct insertion transmitter or as an external mounted transmitter onto a Magnetic Level Indicator. It relies on the position of a magnetic float which is designed ...
-
Manufactured by Sentecbased in CHINA
The structural part of the magnetostrictive liquid level sensor is composed of a stainless steel tube (a measuring rod), a magnetostrictive wire (waveguide wire), a movable float (with a permanent magnet inside), and the like. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide ...
-
Manufactured by KSR Kuebler Niveau-Messtechnik GmbH - a member of the WIKA groupbased in GERMANY
Level transmitters with a magnetostrictive, high-resolution measuring principle are used for continuous level measurement of liquids and are based on determining the position of a magnetic float following the magnetostrictive principle. The level transmitters are mounted on the ...
-
Manufactured by Quest-Tec Solutionsbased in USA
The MTLT-5000 is based upon the magnetostrictive principle. The sensing tube contains a wire which is pulsed at fixed time intervals. The interaction of the current pulse with the magnetic field created by the magnetic float causes a torsion stress wave to be induced in the wire. This torsion propagates along the wire at a known velocity, ...
-
Manufactured by Sino-Instbased in CHINA
LD series rigid rod-type liquid level sensor is sturdy and reliable. It is easy to install and does not need daily maintenance and calibration. Stainless steel measuring rods and floats are not affected by the physical and chemical properties of the liquid ...
-
Manufactured by Babbitt International, Inc.based in USA
The Babbitt LTM series Magnetostrictive Level Transmitter is an accurate, stand-alone, loop-powered device, usually mounted in the top of a tank or other container. It may also be used as a level transmitter when mounted externally on a Babbitt Magnetic Level ...
-
Manufactured by Automation Products Group, Inc. (APG)based in USA
The MPX Series Magnetostrictive Level sensor provides highly accurate and repeatable level readings in a wide variety of liquid level measurement applications. The MPX-F’s flexible stainless steel stem allows for accurate measurements in environments that are not straight-forward. The 316 SS flexible tubing stem coils for compact ...
-
Manufactured by Automation Products Group, Inc. (APG)based in USA
Series Magnetostrictive Level sensor provides highly accurate and repeatable level readings in a wide variety of liquid level measurement applications. The MPX-R’s large, buoyant, and robust float allows it to be used in harsh applications where fouling or buildup might otherwise be of concern. The MPX-E’s lighter ...
-
Manufactured by Automation Products Group, Inc. (APG)based in USA
The MPX Series Magnetostrictive Level sensor provides highly accurate and repeatable level readings in a wide variety of liquid level measurement applications. With a chemical resistant coating and a Kynar float, the MPX-E Chemical Magnetostrictive Level Transmitter delivers ...
-
Manufactured by Jogler LLC.based in USA
is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment ...
-
Manufactured by Jogler LLC.based in USA
The MGT-6000 series liquid level transmitter is exclusively for magnetic level indicators. The low profile waveguide is mounted on the outside of the level gauge chamber. This design isolates the waveguide from excessive vibration and temperature. Enhanced sensor technology provides an output signal that is sensitive, fast, and ...
-
Manufactured by Jogler LLC.based in USA
The Jogler JS-10/JS-30 Series switches are magnetically actuated point level switches. The JS-10 (1 amp) and JS-30 (3 amp) can be configured as a SPDT or DPDT and are available in a “flying lead” configuration (no enclosure), an epoxy-coated Aluminum enclosure, or a 316 stainless steel enclosure. The JS-10 is a low power switch ...
-
Distributed by Techstarbased in USA
Magnetic Level Gauges , Magnetostrictive Level Transmitters, Analog Read Type Transmitters, Drumsite Boiler Level Controls, Waste Recovery Systems, Stilling Wells and Bridle ...
-
Manufactured by SOR Inc.based in USA
within the float chamber making it ideal for high pressure systems. External point level switches or continuous level transmitters such as guided wave radar or a magnetostrictive level transmitter can easily be incorporated into the system without breaking the pressure boundary or disturbing any ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you