Liquid Monitoring Equipment For Monitoring And Testing Available In Quebec
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Glass fiber filters are: Dense, Highly resistant to chemical attach, biologically inert, Easily sterilized: Can be baked or autoclaved, Store indefinitely: Unaffected by ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI’s AS-FS Dual Output flow sensor provides fully redundant and separate outputs in the same outline dimension envelope of single sensor output designs. This is achieved by employing two electrically independent sensor heads and circuit boards; the second output assures continued operation in spite of a failure of one of the two redundant channels, thereby reducing the probability of an ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NIRS Analyzer Pro is a single point process analysis system based on high resolution diode array technology. It provides non-destructive analysis of liquids, granules, powders, slurries or opalescent substances by using fiber optics microbundles and contact probes for reflectance and transflectance ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
Here a general survey of the application of the FLUXANA binders in the XRF: BOREOX, a direct replacement. This is a harmless organic material which shows excellent binding properties and high stability under X-rays. It is particularly good when used as a backing material. CEREOX can be used alternatively, CEREOX is comprised of a wax, previously known as Hoechstwax. This material is clean and ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Acid Gas Scrubber neutralizes inorganic acids that often exist in a process exhaust stream or are created during the oxidation of air pollutants. The module can effectively scrub a variety of acids including Hydrogen Chloride (HCl), Hydrogen Bromide (HBr), Hydrogen Fluoride (HF) and Sulfur Dioxide ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Sensitivity range: 0.1 - 1.0 μm. The High Sensitivity Liquid in Situ (HSLIS-M100e) Chemical Particle Counter provides continuous, real-time particle monitoring of contamination levels in corrosive liquids, including hydrogen fluoride (HF), and is included in Particle Measuring Systems’ (PMS®) complete line of liquid particle counters. Particle Measuring Systems’ HSLIS Liquid ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
To protect monitoring wells (and piezometers) against traffic, destruction, contamination and weather effects, various protective materials are ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Robust near-infrared spectroscopy for quality control, not only in laboratories but also in production environments. The DS2500 Liquid Analyzer is the tried and tested, flexible solution for routine analysis of liquids along the entire production chain. Its robust design makes the DS2500 Liquid Analyzer resistant to dust, moisture and vibrations, which means that it is eminently suited for use in ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
High-end titrator for potentiometric titration with two measuring interfaces for use with Dosino dosing ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
The preferences of our thin films: 25% more pre-cut films per package than other brands, dust proof anti static packaging , lot number tracking system , rolls, pre-cut circles & ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Laboratory series combines the advantages of low liquid nitrogen consumption and medium storage capacity. It has the advantages of light weight, less space occupation and high efficiency storage of large sample freezing. It can meet the different needs of laboratory professionals. All models include freeze shelves and PC freeze boxes to ensure easy storage of ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
For the preparation of pressed pellets for XRF, in most cases, a binder is required. One of the traditional materials used as a binder or backing material is boric acid. However, recently this will be classified by REACH as toxic. Based on this health issue, boric acid is now not considered an appropriate material for this ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
High-end titrator for potentiometric and volumetric Karl Fischer titration with two measuring interfaces and Dosino dosing ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
High-end titrator for potentiometric titration with two measuring interfaces and internal buret ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz® particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing chemicals containing dissolved gas, where bubbles could be incorrectly detected as particles. The system eliminates bubbles by pressurizing the sample and keeping the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The SLS Syringe Sampling System is ideal for applications where precise, small-volume sampling is needed. The system consists of a syringe sampler for either corrosive or non-corrosive liquids, a particle counter for different sizing sensitivities, and software. A convenient naming system identifies the particle counter installed inside the ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
High-end titrator for potentiometric and volumetric Karl Fischer titration with two measuring interfaces and Dosino dosing ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
High throughput TOC/ TN trace analysis in a wide concentration range with catalytic high-temperature combustion. Highest sample throughput due to parallel purge and measurement. Highest level of automation with automatic sample acidification and effective reverse rinse function to prevent sample carryover during concentration ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
For the preparation of pressed pellets for XRF, in most cases, a binder is required. One of the traditional materials used as a binder or backing material is boric acid. However, recently this will be classified by REACH as toxic. Based on this health issue, boric acid is now not considered an appropriate material for this ...
-
PremiumManufactured by Galaxy Scientific Incbased in USA
The NF2000 Portable Fiber Optic FT-NIR Spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It delivers a wide range of technical innovations ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you