Load Sensors Equipment For Monitoring And Testing Available In Kansas
-
PremiumManufactured by InterOcean Systems LLCbased in USA
Custom-built Towing Winch with 30HP IP65 induction motor and separately driven side-winder level wind. Includes emergency, water-cooled, slip clutch should payload become entangled. Level wind incorporates load and magnet sensors for direct line tension and scope display. Winch control and monitoring can be accessed locally through the attached control panel or via a remote laptop ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Our custom bolt-on strain gauge sensors are designed and manufactured to your application, based on your drawings and specifications, including all types of output formats. Ideal for dynamic load monitoring, capable of measuring and monitoring axle stress and weight with high accuracy. Do you have an application for strain gauge measurement that requires a quick and simple installation, ...
-
PremiumManufactured by Harp Renewables Limitedbased in IRELAND
The CX20/CX50 Hopper has a 6-tonne storage capacity. Download the spec sheet for full details. ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
The Type 133 Load Cell Amplifier is designed to allow the customer to configure and amplify analogue outputs to several combinations of input ranges and on current (mA) or voltage (VDC) outputs. Use with Datum’s bolt-on sensors to amplify their signals. ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Continuous measurement of the snow-water-equivalent (SWE). The snow scales SSG-2 is a measuring device, which measures the snow water equivalent (SWE) of the snow pack with a high level of precision and reliability. The installation is quick and easy. The fact that there is no anti-freeze needed makes the system environmentally ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
Custom-built Oceanographic winch with 200HP IP65 induction motor with independent level wind drive capable of pulling 27,500 line tension (12,500kg) at 147 ft/min (45m/min). Closed-loop motor control with dynamic braking provides ultra-slow payload control down to a few feet per minute. The drum holds 24,600 ft (7,500 m) of 0.680 in. (17.2mm) electromechanical, double-armor cable. Level wind ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
4-20mA Load Cell Amplifier. The Type 131 Load Cell Amplifier is designed to interface to a full bridge strain gauge based bolt-on load cell or similar sensor, allowing use of the resultant data in a more efficient and productive way. This model load cell amplifier, Type 131, can be calibrated to provide a 4-20mA output for a fixed load range from the ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
0-10V Load Cell Amplifier: The Type 132 Load Cell Amplifier is designed to interface to a full bridge strain gauge based bolt-on load cell or similar sensor, allowing use of the resultant data in a more efficient and productive way. This model load cell amplifier, Type 132, can be calibrated toprovide a 0-10V output for afixed load range from the ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
BPC offers two types of data loggers as well as several in-line sensors, and electronic accessories. All are frequently required for setting up an automated laboratory or a small pilot-scale process monitoring system. Our high-quality instruments offer possibility for a better understanding of fermentation processes, resulting in better process design and optimised process ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Basic principle of the S-sensor is that the natural frequency of a vibrating strip varies according to the tension in the strip.The heart of the S-sensor is an S-shaped metal strip fixed at both ends to a metal ring. When the ring is deformed, the natural frequency of vibration of the strip ...
-
Manufactured by American Forklift Scalebased in USA
Mostuser-friendlysystem available with built-in troubleshooting diagnostics and our toll-free technical support ...
-
Manufactured by Tecnetics Industries, Inc.based in USA
The Tecweigh WY10 Single Idler Conveyor Scale is the most dependable and rugged belt scale on the market. Weather-tight one-piece construction keeps your line rolling even in the most extreme conditions: dust, dirt and harsh weather. Unique within our industry, the WY10 utilizes LVDT load sensor technology. LVDT load sensors simply can’t be overloaded and are far less susceptible to damage ...
-
Manufactured by HBM India A Division of Spectris Technologies Pvt. Ltd.based in INDIA
Strain transducer SLH700 – Hermetically sealed and with minimal influence on the measured object allowing use for lower strain to force comparatives. Extensometers, such as the SLH700 series measure forces indirectly and are distinguished by their simple yet effective functionality. When a force is applied to the structure on which the sensor is mounted, deformations whose magnitude ...
-
Manufactured by General Kinematicsbased in USA
General Kinematics shear take-away conveyors are specifically designed to handle the severe conditions found underneath shears in scrap processing operations. Heavy-duty wear resistant troughs handle the impact of falling material while the exclusive General Kinematics Syncro-Coil drive is designed to handle the force of even the largest impacts without damage to the conveyors drive ...
-
Manufactured by Flintec Incbased in USA
The PA1 is a series of low capacity, aluminium single-point load cells intended for a wide range of industrial applications. Due to their compact design, the PA1 can be integrated into low-capacity weighing machinery, medical devices and general machinery for process automation and control. The PA1 has a broad range of capacities, extending from 0.3kg to 20kg. It features full-bridge, ...
-
Manufactured by EnOcean GmbHbased in GERMANY
The Door/Window Sensor can be easily mounted on any standard door or window frame to enable occupancy based control of lighting, HVAC and miscellaneous electric loads. The sensor uses radio frequency technology to communicate wirelessly with other EnOcean-based devices whenever it detects that a door or window has been opened or closed. For maximum efficiency and control of energy use, combine ...
-
Manufactured by CON-V-AIR Solutionsbased in CANADA
Our storage silos are manufactured to meet our stringent specifications and are designed to reduce onsite installation requirements. Internal and external welding ensure leak free operation. Cone design ensures product flow for even the most flow restrictive materials. Operational by design our silos are aesthetically pleasing and many architects have asked for our input in an effort to integrate ...
-
Manufactured by Jim Myers & Sons, Inc. (JMS)based in USA
The effective management of biosolids has become of great importance for wastewater utility organizations. Beneficial use of solids removed from the wastewater treatment process contributes positively to both plant costs and the environment. Treatment plant biosolids come with several negative characteristics. Biosolids are both high in moisture content and contaminants. The result is a heavy, ...
-
Manufactured by burster gmbh & co kgbased in GERMANY
Tensile/compressive force measurement in the X and Y directions simultaneous, for robotic applications, non-linearity < 0.1 % F.S., goodprice/performance ...
-
Manufactured by Cmak Crane Systembased in TURKEY
HoistSense+ is an advanced electronic system that constantly keeps track of usage, load and critical incidents; while using this information to the advantage of the user to fuither increase the effîciency and decrease the downtime of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you