Monitoring Lubricant (Lubricant Monitoring) Equipment
-
Manufactured by Bijur Delimon International (BDI)based in USA
The DS405 is designed to monitor automatic oil or grease lubrication systems and is ideally suited to be used with our Lube Point Monitor (55105). For Recirculating Oil systems, the DS 405 provides real-time monitoring of the oil flow rate. Total loss Oil or Grease systems are time based and the DS 405 monitors ...
-
Manufactured by Adash spol. s r.o.based in CZECH REPUBLIC
The A4910 Lubri is a maintenance tool used for monitoring and control of the lubrication process. The A4910 Lubri measures the actual bearing lubrication status and informs the operator when the lubrication state is optimal. Application of the A4910 Lubri extends the bearing lifetime and saves lubricants. ...
-
Manufactured by SCP SCIENCEbased in CANADA
In 1999, a new calibration procedure (ISO 11171) for automatic particle counters was introduced, rendering previous procedures (i.e. ISO 4402) obsolete. With the new, recently updated (2010) procedure, secondary calibration requires a fluid tracable to NIST SRM 2806 - a suspension of 3.3 mg/L of ISO medium test dust in super-clean hydraulic fluid. CONOSTAN® offers a full range of cost-effective ...
-
Manufactured by Applied Maintenance Technology Ltd.based in UNITED KINGDOM
The A4910 Lubri is an instrument that monitors and controls the lubrication process, through measuring the lubrication status of a bearing. The A4910 Lubri informs the engineer when optimal lubrication is reached, thus helping to ensure that bearings are neither under- or ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Monitoring lubricant condition in machine wear when and where it is needed significantly reduces the time required for laboratory analysis and improves machine reliability. Spectro Scientific offers a wide range of portable devices with field simplicity and lab accuracy. The product combinations are powerful for different applications as ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
LaserNet 200 Series is a contamination and wear debris analyzer that monitors lubricant condition for predictive maintenance. Particle Analyzer: The LaserNet 200 Series allows reliability professionals to quickly and easily assess machinery health in just minutes. By testing only a few milliliters of fluid, users see a complete picture of ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Today, marine engine suppliers recommend daily monitoring of the Base Number (BN) to optimize cylinder lubrication feed rate and determine the residual BN of the piston underside oil. Changes in vessel operation are driving innovation in engine monitoring .The shift to “slow steaming” and the resulting “cold ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Our new FT mid-IR spectrometer InfraLUM FT-08 has been designed basing on our extensive R&D and expertise in the IR spectroscopy (infrared spectroscopy). This multipurpose and easy-to-operate instrument provides a well suited option for various analytical laboratories, like determination of aromatic hydrocarbon content. The high-quality misalignment-proof optics, high-sensitivity DLATGS ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
SISU heavy duty truck with Caterpillar engine, 10×10 drive for extreme off-road capabilities, road approval (Germany, Romania) dimensions and weight within the permitted legal limits for special trucks, 6 hydraulical supports, mechanically locked, 90 tons hook load, drawworks with closed-loop cooling and API 7K monogram, sand-line drum for 3000 m working depth (higher depths possible), ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
From algae harvesting to beer clarification and protein extraction: If you want to separate or purify liquids or remove ultra-fine particles you need strong and robust separators. With their enormous centrifugal acceleration of up to over 12,000 g, Flottweg separators are real purification and clarification all-rounders - highest quality made in Germany. Where decanter centrifuges reach their ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
From algae harvesting to beer clarification and protein extraction: If you want to separate or purify liquids or remove ultra-fine particles you need strong and robust separators. With their enormous centrifugal acceleration of up to over 12,000 g, Flottweg separators are real purification and clarification all-rounders - highest quality made in Germany. Where decanter centrifuges reach their ...
-
Manufactured by Piusi S.p.A.based in ITALY
The PIUSI K33 and K44 are mechanical flow meters suitable for the monitoring of lubricating oil. PIUSI K33 as a mechanical flow meter has a partial indicator with 3 digits (max. 999 litres), total 6 digits, while PIUSI K44 has a partial indicator with 4 digits (max. 9999 litres), with a total of 7 ...
-
Manufactured by Piusi S.p.A.based in ITALY
The PIUSI K200 product is an electronic flow meter suitable for the monitoring of lubricating oil. K200 as electronic flow meter shows on the display a partial-total of 5 digits (h=11.5 mm) with floating point from 0.001 to 999.99 Total, non-resettable to 8 digits (h=5 mm) from 1 to 99999999. ...
-
Manufactured by SDT Ultrasound Solutionsbased in BELGIUM
Permanent contact/structure (IP65) sensor for continuous monitoring bearings lubrication, valves, steam traps, hydraulics systems and rotating assets, even the slowest ...
-
Manufactured by UE Systems Incbased in USA
The OnTrak SmartLube is a remote bearing monitoring and lubrication system designed to reduce what causes over 80% of premature bearings failure by enabling remote condition-based lubrication. When it comes to bearings, friction is the enemy. We go to great lengths to try to avoid unnecessary friction in our rolling element bearings and yet ...
-
Manufactured by Eaton Corporationbased in USA
The CSM 02 multi-analysis system from Eaton monitors the hydraulic and lubrication systems’ fluids by determining the solid contamination and optional water saturation, temperature, viscosity and relative dielectricity. It can be used in stationary and mobile operations and operates in an off-line cycle independent from the system ...
-
Manufactured by E E Elektronik Ges.m.b.Hbased in AUSTRIA
rests on the high-end E+E capacitive sensing element. The EE36 is ideal for online monitoring of moisture in lubrication or hydraulic, which is very important for the long-term performance of ...
-
Manufactured by Bluetech s.r.o.based in CZECH REPUBLIC
LR chain conveyors are manufactured in the following designs: Straight, L-shaped, Z-shaped, with two bends and a gooseneck, to be installed on the floor, to be installed in a pit, mobile. Rubber belts with one or more inner plies and in standard or oil-resistant ...
-
Manufactured by Bluetech s.r.o.based in CZECH REPUBLIC
TR, STR, UTR, and KK chain conveyors are manufactured in the following designs: straight, l-shaped, z-shaped, with two bends and a gooseneck…, to be installed on the floor, to be installed in a pit. Rubber belts with one or more inner plies and in standard or oil resistant ...
-
Manufactured by Memolubbased in BELGIUM
Multi-point automatic lubrication system, with adjustable flow, suitable for one or several lubricants ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you