Magnetometers Equipment For Monitoring And Testing Available In Belize
-
ShowcaseManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The Falmouth Scientific HMS-624 Side Scan Sonar System utilizes advanced technology to provide superior imaging capabilities for deep and shallow water ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
INS-DU-OEM: Low Cost Ublox Based GPS-Aided Inertial Navigation System Utilizing ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Measure excess pore pressure that is generated during soil penetration with our digital CPTU piezocone testing system. In the quotations, Gouda Geo-Equipment issues a clear distinction is made between on one hand the CPT penetrometer pusher (this could either be a truck-based, crawler-based, trailer-based or stand-alone unit) and on the other hand the CPT system (this could either be mechanical ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Weapon Orientation Module - WOM provides a level of performance previously unseen in the world of miniature 3DOF orientation sensors. WOM employs the use of three axes each of gyroscopes, accelerometers, and magnetometers to track both slow and fast movements of weapons in real-time. With fully embedded capabilities to calibrate against soft- and hard-iron interference present ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Optically enhanced Weapon Orientation Module - OptoWOM -II, is Inertial Labs' second generation of its Optically Enhanced Weapon Orientation Module. OptoWOM™-II combines technologies of inertial sensors with optical image tracking resulting in a robust and reliable 3DOF orientation module capable of operation in virtually any environment. With the addition of optical image ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A magnetometer is a scientific instrument used to measure the strength and/or direction of the magnetic field. The Earth’s magnetic field (the so magnetosphere) varies from place to place, for various reasons such as inhomogeneity of rocks and the interaction between charged particles from the Sun and the magnetosphere. A mass of ferromagnetic material creates a detectable disturbance in ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN multi-purpose CPT penetrometer platform is an economical skid-based rig with full CPT testing capabilities. It comes with CW-couplings for quick and easy attaching to a hydraulic excavator. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The FerroTec FT 10 helps you safely and reliably locate concealed shaft covers, sliding rods and caps, as well as pavement markers and other objects. The only requirement is that they are made of iron, cast iron or steel. The ergonomic design, convenient operation and precise measuring technology make your work fast and ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN lightweight CPT penetrometer set is an economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
Turn your buoy into an intelligent data collecting platform with the Aanderaa MOTUS Stand-Alone Sensor. There are numerous ways of measuring Ocean Waves. At Aanderaa we have focused on three different types of measurement. One option is the MOTUS Directional Wave Sensor suitable for integration on different buoy types. It is intended for commercial as well as research use. The sensor processes ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Inertial Labs has developed a professional version of Motion Reference Units (MRU-PD) to meet the requirements from marine and hydrographic applications. The MRU-PD is an enhanced, high-performance strapdown Motion Sensor - affordable solution for survey, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Nearshore cone penetration testing is not as difficult as it might seem. In case of nearshore CPT (also referred to as over-water or marine CPT) the specifications of the equipment, the operation and the procedures to follow differ slightly from land testing. It is for reason recommendable to opt for a CPT penetrometer rig that has been purposely designed for this ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Inertial Labs has developed Motion Reference Units (MRU) to meet requirements from marine and hydrographic applications. MRU is enhanced, high-performance strapdown Motion Sensor, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it is ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The MS-IMU3050 is an Inertial Measurement Unit that provides a smaller, lower power, and cost-effective alternative to Fiber Optic Gyro (FOG) based IMUs and other high performance MEMS IMUs. The IMU contains triaxial MEMS gyros, accelerometers, and magnetometers that are extensively tested and calibrated over the full operational temperature range to ensure the highest performance and robust ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs GPS-Aided Inertial Navigation System (INS-DM) is the latest version of Inertial Navigation System, developed by Inertial Labs. The INS-DM is the result of over 20 years of our experience in developing and supplying INS solutions to land, marine and aerial platforms around the ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
LaserNet 200 Series is a contamination and wear debris analyzer that monitors lubricant condition for predictive maintenance. Particle Analyzer: The LaserNet 200 Series allows reliability professionals to quickly and easily assess machinery health in just minutes. By testing only a few milliliters of fluid, users see a complete picture of machine wear and particulate contamination. This enables ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Monitoring lubricant condition in machine wear when and where it is needed significantly reduces the time required for laboratory analysis and improves machine reliability. Spectro Scientific offers a wide range of portable devices with field simplicity and lab accuracy. The product combinations are powerful for different applications as together they provide more comprehensive analysis of oil ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs GPS-Aided Inertial Navigation System (INS-U) is an IP67 rated version of the new generation, fully-integrated, combined Inertial Navigation System (INS) + Attitude & Heading Reference System (AHRS) + Air Data Computer (ADC) high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The MS-IMU3030 Inertial Measurement Unit delivers unmatched low drift performance in an ultra-compact aluminum package. The IMU contains triaxial MEMS gyros, accelerometers and magnetometers that are extensively tested and calibrated over the full operational temperature range to ensure the highest performance and robust operation. The gyro bias stability of 0.55 degrees per hour and accel bias ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Inertial Labs Attitude and Heading Reference System, AHRS-10 is a high-performance strapdown system that determines absolute orientation (heading, pitch and roll) for any device on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you