Manometers Equipment For Monitoring And Testing Available In Quebec
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Our arsenic filter are filled with ADSORBSIA, a Titanium-based DOW Chemical patented ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Depending on the type of water, suspended solids concentration, oil and grease, COD/ BOD, iron contents, sand filters are sized differently, but the basic design data to clarify natural ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The catalytic gas purifier also removes hydrocarbons and CO from the treated zero gas. This gas free of HC and CO is suitable as process and carrier gas for gas chromatographs and to produce calibration gas for CO/HC ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HFC-Series, HI-Volume Air Flow Calibrators, have eliminated the need for cumbersome orifice plates and water manometers. The HFC-XXC series units utilize a precision machined Venturi tube coupled with a pressure differential gauge giving a direct reading in the volumetric units of your choice (i.e. SCFM @ stp) . The unit is calibrated against an in-line N.I.S.T. traceable laminar flow ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 510 digital manomenter is an all in one, low pressure measurement solution. The 510 can measure total external static pressure, differential pressure, duct velocities, manifold pressures, and air flow with pitot tube (optional). With the testo 510, performing system tests has never been easier using our single, easy to use, rugged, compact digital manometer. Its small form factor, ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact zero gas system with permeation dryer and 4 liter pressurizing gas tank. For process and zero gas used in the gas analysis industry. Compressor requires no ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact zero gas system with permeation dryer and 6 l pressurizing gas tank for process and zero gas used in the gas analysis industry. Compressor requires no oil. Immediate functional, maintenance-free ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact zero gas system in 19" case with integrated catalytic gas purifier, permeation dryer, and 6 l pressurizing gas tank. For process and zero gas used in the gas analysis industry. Compressor requires no ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact zero gas system for process and zero gas used in the gas analysis industry. Compressor (Thomas pump type 607CD22) requires no oil. Immediate functional, maintenance-free ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compact zero gas system with permeation dryer and 25 l pressurizing gas tank. For process and zero gas used in the gas analysis industry. Compressor requires no oil. Compressor is mounted in a sound insulated ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Depending on the type of water, suspended solids concentration, oil and grease, COD, BOD and pesticides contents, activated carbon filters are sized differently, but the basic design data to clarify natural ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Model XC-523 is a full-feature manual meter console. Designed with a convenient display layout for manual data recording, this Isokinetic XC-523 Source Sampling Console allows the operator to monitor gas velocities, temperatures, and pressures and adjust sample flow rates to maintain isokinetic sampling conditions. The lightweight X-case and compact design allows for easy ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Compressed air system with compressor and filter. Oil-free dental compressor. For process gas, lab or dental gas or zero gas system for gas analysis. Modular system for stationary installation. Optionally with catalytic gas purifier and ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The BRL-3000M & BRL-3300M Series Retro-Fit Kits are for the conversion of Brushed, Shelter Type, High Volume units to complete Manual Speed Flow Controlled, 2 or 3 Stage Brushless Blower High Volume Air ...
-
based in USA
STORM’s Fecheimer probe is ideal for testing in locations with turbulent airflow such as test planes close to fans or internal bracing, bends in the duct work and more. The Fecheimer Probe is a three-hole probe with one impact hole and two static holes. This allows the probe to be null balanced to determine the yaw angle of flow and to correct the velocity head. They are manufactured ...
-
Manufactured by Nixalite of America Inc.based in USA
A state-of-the-art compact and lightweight UVL cold fogger and sprayer that uses 110vac plug in power. Hi-tech flow meter allows for precise control of application rates of all types of fogging and spraying solutions. Modular design expands to meet your needs. Optional timer module, 5.3 gallon solution tank and 16 foot (5 meter) long applicator hose extension can all be added to expand the ...
-
Manufactured by Fantini Cosmi S.p.A.based in ITALY
Assembled manifold combines together in a compact way all the components for the safety, protection and control of for heating systems up to 35 ...
-
Distributed by MeterMall USAbased in USA
Convenient all-in-one Air Velocity Kit Small, light and easy to use. No set-up or leveling needed. Digital manometer reads from 0-20.00" w.c. with ±0.5% F.S. accuracy and minor divisions to 0.01. Large 1/2" LCD readout is easy to see in poorly lighted areas and has "low battery" warning. Included is a 6" stainless steel Pitot tube with integral compression fitting to hold it securely ...
-
Manufactured by MRU Messgerate fur Rauchgase und Umweltschutz GmbHbased in GERMANY
Precision manometer for accurate pressure-, differential pressure and temperature ...
-
Manufactured by Neftgen Engineering Incbased in TURKEY
It is manufactured to clean the sediment that forms on the bottom of the tank over time and causes the fuel quality and stored fuel volume to decrease. With this system designed by Neftgen, there is no need to enter the tank or stop the fuel supply process. While the sales process is in progress at the station, fuel cleaning can be done. Filtration can be performed according to different ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you