Marine Monitoring Downloads
-
Premium
CTD-Diver - Brochure
Where there is a need to monitor not only groundwater levels but also saltwater intrusion, injected wastewater, or contamination from chemical discharges and landfill sites, the ceramic-casing on the CTD-Diver is the instrument of choice. In addition to the pressure and temperature sensor, the CTD-Diver has a four-electrode conductivity sensor for reading conductivity across an expanded ...
-
Premium
Mona - Introducing Profiler Buoy - Brochure
A comprehensive tool for commercial and research purposes, Profiler Buoy ‘Mona’ is designed to be an end to end solution. A sea monitoring system consisting of an autonomous profiler buoy, data-logger, hardware controller and software based data management system. This system provides a comprehensive product that is both cost-effective and ...
-
FSI - Model HMS-AT650 - Underwater Transducer - Brochure
The HMS-650 is a very rugged, high power, underwater transducer specifically designed for marine sub-bottom profilers and echo-sounders. The transducer is designed to operate in the 200Hz to 2kHz frequency range. The transducer is suitable for operation in a variety of array configurations to support shallow water sub-bottom profiling applications. Single transducers can support up to 3000W power ...
-
FSI - Model HMS-ATTR-15K - Underwater Transducer - Brochure
The HMS-ATTR-15K is a very rugged, high power, underwater transducer specifically designed for marine sub-bottom profilers and echo-sounders in the 8 to 23 kHz frequency range. The transducer is designed for operation in a variety of configurations to support shallow water surveys to deep water hull mounted arrays capable of operation in survey depths up to 6Km. Vessel installations will vary ...
-
LeveLine - Model CTD - Water Level, Temperature, Conductivity and Salinity Measurements Logger- Brochure
The LeveLine CTD records highly accurate water level, temperature, conductivity and salinity measurements in a wide range of groundwater and surface water applications. Housed inside the sealed body is a ceramic level sensor, temperature sensor, 10-year lithium battery and a versatile datalogger with capacity for 500,000 data points. ...
-
SWiFT Deep CTD - Datasheet
Designed from the outset with the intention of a seamless workflow, the SWiFT Deep CTD profiler provides survey-grade sensor technology coupled with the convenience of Bluetooth® connectivity and rechargeable batteries. An integral GNSS module, to geo-locate each profile, completes the package. Data can be easily and quickly downloaded and reviewed wirelessly via Bluetooth connectivity using ...
-
Marine Monitor - User Manual
Wave II Monitor 18,5" (16:9): 3 Year Warranty. Full glass front. 1920 × 1080 pixel (Full HD). -15°C to +70°C operating temperature. DVI-I (Analogue and Digital), Display port, DDC/CI (DVI & DP). ±89° viewing angle. IEC 60945 and IACS E10. ...
-
Martek Marine - Model MM2000 - Gas Detector Datasheet
The MM2000™ gas detector is an intelligent and addressable fixed system designed to protect against a range of flammable, toxic and asphyxiant gases. Each fixed gas detection system is manufactured in-house by our specialised team of engineers – so you know what you’re getting is a truly bespoke system; The MM2000™ system tests for toxic and flammable gases in a range of ...
-
Martek Marine - Model MM5001 - Gas Detector Datasheet
The MM5001™ gas detector is a permanently installed, integrated sequential gas sampling system which can be used for detecting and providing alarms in the presence of explosive and toxic gases in ballast tanks, void spaces and cargo tanks. This is in line with the three core pillars of Martek Marine; ship safety, performance and crew welfare. ...
-
Soundnine - Ulti-modem Underwater Inductive Modem - Brochure
The Ulti-modem connects serial instruments to realtime inductive telemetry, allowing underwater communication over common plastic jacketed wire rope (mooring line). It interfaces easily with most CTDs, acoustic profilers, CO2 sensors and other scientific instruments. Typical communication range exceeds 6 ...
-
Sequoia - Model LISST-Tau - High-Precision Transmissometer for Underwater Vehicles - Datasheet
LISST-Tau is a high-precision transmissometer for underwater vehicles, profiling packages, CTDs, and other systems. With high-quality optics and a carefully selected LED source, it transmits a collimated beam through the water, and precisely measures the light transmitted through its 15 cm path. Light modulation with synchronous detection rejects ambient light, while oversampling and averaging ...
-
Young Response One - Model 91000 - Ultrasonic Anemometer Brochure
The YOUNG ResponseONE™ Ultrasonic Anemometer accurately measures wind speed and wind direction without moving parts. The IP66 rated construction enables reliable operation in severe environments. Standard digital serial output formats provided include SDI-12, NMEA, and ASCII text. Output may be continuously provided or, to conserve power, polled output may be used. RS-232 or RS-485 ...
-
Young - Model 05106 - Marine Wind Monitor Brochure
The Wind Monitor MA is an accurate and reliable wind sensor specifically designed for the rigors of the marine environment.The wind speed sensor is a four blade helicoid propeller. Unique transducer produces a pulse signal without electrical contacts or slip rings. The wind direction sensor is a durable molded vane. Vane angle is sensed by a precision potentiometer housed in a sealed chamber. All ...
-
VAF - Model TT-Sense - Shaft Power Thrust Meter Brochure
Since many years VAF Instruments has been the expert in the field of maritime measuring equipment. The upcoming new IMO regulations and the effectiveness of SEEMP** legislation on 1st of January 2013 have inspired us to develop the next step in our successful line of sensors: the TT-Sense® Shaft Power Thrust ...
-
Using Multicollector ICP-MS with a Desolvating Nebulizer Accessory for Stable and Radiogenic Isotope Ratio Measurements of Speleothem and Marine Coral Samples - Application Note
Multicollector ICP-MS instruments are widely used in geochemistry for high precision isotope ratio measurements. Signal enhancement and/or interference reduction (ex. oxides and hydrides) is often necessary for useful measurement of low abundant isotopes and masslimited ...
-
Develogic - Model Sono.Vault - Acoustic Recorder and Signal Analyzer Brochure
The develogic Sono.Vault acoustic recorder and signal analyzer is designed for long- termrecording and monitoring of marine acoustic emissions. Driving design parameters during development were energy-efficiency, premiumrecording quality, application flexibility and ruggedness. The system is able to record acoustic signals continuously with sampling rates up to 96kHz @24bit sample resolution and ...
By Develogic
-
SBE - Model SBE 19plus V2 SeaCAT - Profiler CTD - Datasheet
The SBE 19plus V2 SeaCAT measures conductivity, temperature, and pressure at 4 scans/sec (4 Hz) and provides high accuracy and resolution, reliability, and ease-of-use for a wide range of research, monitoring, and engineering applications. Pump-controlled, T-C ducted flow minimizes salinity spiking caused by ship heave and allows for slow descent rates without slowing sensor responses, improving ...
-
SBE - Model 911plus - CTD Sensor for Primary Oceanographic Research Tool - Brochure
The SBE 911plus CTD is the primary oceanographic research tool used by the world’s leading institutions, providing 24 Hz sampling with an SBE 9plus CTD Unit and SBE 11plus V2 Deck Unit. The 911plus system provides real-time data collection over 10,000 meters of cable (single- or multiconductor electro-mechanical sea cable, slip-ring equipped winch, and computer for data display and logging ...
-
SBE - Model 3F/3Plus/3S - Oceanographic Temperature Sensor - Datasheet
Intended primarily for use on the SBE 911plus profiling CTD (3plus) and the 25plus profiling CTD (3F), the SBE 3 can also be used as a component in custom oceanographic systems or for high-accuracy industrial and environmental temperature monitoring applications. The superior performance of the SBE 3 results from its optimized electronic design, superior calibration, response characterization, ...
-
SBE - Model 18 - pH Sensor - Brochure
The SBE 18 pH Sensor uses a pressure-balanced glass-electrode /Ag/AgCl-reference pH probe to provide in-situ measurements at depths to 1200 meters. The replaceable pH probe is permanently sealed and is supplied with a soaker bottle attachment that prevents the reference electrode from drying out during storage. The sensor is a modular, self-contained package that is easy to install, service, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you