Only show results in Connecticut? Ok

Mass Flow Monitoring Applications

  • Premium

    Industrial monitoring solutions for the flue gas desulphurisation areas

    Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Glass sorting for the glass recycling industry

    Elimination of contaminants; Ceramics, stones, porcelain, Metal, Glass ceramic (heat resistant glass), Leaded glass, Organic impurities, Plastics, Cork, Paper. Sorting and recovery of; White glass, Green glass, Brown glass, Other colors and combinations of colours.

    By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.

  • Premium

    On-line gas, particulate analyzers, flow monitors, data acquisition for construction materials industry

    The production of construction materials has a long tradition. Thus the production processes in some places have not yet been adapted in all areas to the present state of art. With our measuring systems we are improving and modernizing production processes in cement and mineral plants as well as in the construction material chemistry. Continuous mass flow measurement, online moisture measurement and dust monitoring systems are used frequently in this sector.

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Air pollution, emission and process monitoring systems for food & pharma

    High accuracy measurement and reliability in monitoring instrumentation is called for by Food and Pharmaceutical Processes. ENVEA’s unique capabilities allow the observation and control of many of the manufacturing functions found in these industries. From the measurement and control of emitted dust from dryer filter plant to the non-intrusive, solid state measurement of powder mass flow and the monitoring of process gas quality, ENVEA instrumentation provides Plant Operators with the opportunity to fine...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Air pollution, emission and process monitoring systems for incineration

    ENVEA’s long association with the Incineration Industry includes supporting Process Operators to meet environmental obligations and the requirement for high performance instrumentation with quality assurance features for compliance reporting. In addition to the importance of regulatory compliance, the control and treatment of emissions from Incineration processes represents a significant proportion of overall costs, therefore, quality data from emissions and process monitoring provides valuable feedback on...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Air pollution, emission and process monitoring systems for minerals

    ENVEA’s experience of working in the Mineral Industry has led to the development of an extensive range of unique ambient, emission and process monitoring solutions to suit often challenging process conditions. In addition to main stack emission monitoring and measurement, by closely monitoring process conditions such as solids flow, the measurement of material mass via non-intrusive, solid state powder mass measuring systems and proactive baghouse performance monitoring can improve process efficiency.

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Thin-film Measurement Technology for Automotive Industry

    With new innovations in the automotive industry, the need for accurate and robust measurement methods has become relevant. IST’s sensing solutions satisfy this need. Thin film platinum temperature sensors capable of measuring up to +1000°C provide precise measurement solutions for diesel engine applications. Additionally, thermal mass flow sensors are capable of monitoring vital fuel and engine systems in these harsh conditions. IST’s humidity sensors are also largely applicable in the control of...

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Thin-film Measurement Technology for Building Automation Industry

    The Heating Ventilation and Air-condition (HVAC) market in the Building Automation industry focuses on controlling atmospheric conditions to make them more suitable. Among the conditions controlled by these systems are temperature and humidity. aIST’s thin film platinum and nickel temperature sensors are ideal for heat meter monitoring and control applications in HVAC because of their high resolution and long term accuracy. Additionally, IST’s thin film capacitive humidity sensors are ideal for...

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Raw-gas monitoring for scrubber optimizing

    The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing material.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Air pollution, emission and process monitoring systems for chemicals

    ENVEA’s long standing involvement with manufactures of powdered chemicals such as TiO2 and carbon black has led to the development of a wide range of ambient, emission and process monitoring systems designed to overcome often challenging monitoring conditions including acidic condensation and potential contamination. Approved measurement and monitoring systems not only protect our environment by meeting and exceeding regulatory requirements but also provide valuable feedback on process performance providing...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Air pollution, emission and process monitoring systems for metals

    ENVEA’s extensive range of ambient, emission and process monitoring systems are particularly suitable for use in the often harsh, high temperature and dusty environments found in the Metals Industry. A wide range of measurement technologies are available for monitoring process parameters such as the moisture content of fuels (coal), blast furnace efficiency, the continuous monitoring of sinter dust transfer and silo level indication. In addition, instruments to monitor and identify potential faults in dust...

    By ENVEA based in Poissy, FRANCE.

  • Air control for wastewater treatment aeration

    Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result,...

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Greenhouse gas monitoring for regulations and compliance consultancy

    Kurz thermal mass flow meters exceed the certification levels required by the Mandatory GHG Reporting regulation and are approved for these applications.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Flow Measurement instrumentation for superior natural gas measurement & control

    Precise measurement of natural gas requires high accuracy, low pressure drop and direct mass flow reading—all the hallmarks of Sierra’s immersible thermal, mass vortex and thermal mass flow controllers. Our mass flow controllers are ideal for natural gas flow measurement with 100:1 turndown and no moving parts, providing a robust MFC solution. Our natural gas flow measurement instruments can also handle liquefied natural gas (LNG) via our cryogenic mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Precision liquid flow sensor measurement technology

    Accurate liquid flow sensor measurement can reduce water bills, determine leakage rates, and increase system efficiency. Solve accurate water and industrial liquid flow measurement requirements with clamp-on or insertion ultrasonic flow liquid flow meters featuring precision sensing elements or our complete line of multivariable mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Argon mass flow meters flow solutions

    Thermal mass flowmeters and controllers are ideal for Argon application where precision is key. Sierra specializes in accurate mass flow measurement and/or control of Argon gas. Popular applications range from general industrial process control, inerting and steel purification processes to name a few.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Choose high accuracy gas flowmeter for increased precision and profitability

    Sierra designs and manufactures a wide range of today’s most advanced analog and digital gas flowmeters and controllers, including a high-pressure gas flowmeter. For gas mixing and blending applications, accuracy and precision control and measurement are always a central requirement. Sierra’s precise flow meters and controls provide end-users with high performance in gas mixing and blending applications like creating artificial atmospheres, gas mixing in manufacturing, inerting and gas chromatography.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Ultra low pressure drop MFC flow solutions

    Precision mass flow control with industry leading pressure drop of 4.5 psid (310 mBard) up to flows of 500 slpm (nlpm); Accuracy +/- 1.0% of full scale; 316 stainless steel construction; CE Approved

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Low flow control (down to 0.1 sccm) flow solutions

    Low flow measurement and control is a difficult application. Ultra low flow mass flow controllers can accurately control flows from 0.1 to 0.4 sccm which is ideal for measuring and controlling doping gases for pilot plants and other research houses.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Flow meters for the semiconductor processing

    From bulk gas delivery to cleaning to purging operations, Sierra`s mass flow meters and controllers offer the simplicity and robustness demanded in these applications. Our ability to handle corrosive gases, high flow rates and multiple gases with the same unit makes Sierra`s mass flow meters and controllers a tool-makers choice.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you