Mass Flow Monitoring Applications available in British Columbia
-
Premium
Air pollution, emission and process monitoring systems for metals
ENVEA’s extensive range of ambient, emission and process monitoring systems are particularly suitable for use in the often harsh, high temperature and dusty environments found in the Metals Industry. A wide range of measurement technologies are available for monitoring process parameters such as the moisture content of fuels (coal), blast furnace efficiency, the continuous monitoring of sinter dust transfer and silo level indication. In addition, instruments to monitor and identify potential faults in dust ...
By ENVEA based in Poissy, FRANCE.
-
Premium
On-line gas, particulate analyzers, flow monitors, data acquisition for construction materials industry
The production of construction materials has a long tradition. Thus the production processes in some places have not yet been adapted in all areas to the present state of art. With our measuring systems we are improving and modernizing production processes in cement and mineral plants as well as in the construction material chemistry. Continuous mass flow measurement, online moisture measurement and dust monitoring systems are used frequently in this sector. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Gas flow management solutions for gas chromatography calibration sector
Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the required flow rates for single or multi-point calibration. In all cases, Environics mixers allow you to use less expensive single-gas cylinders or bulk tanks in place of ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
Ambient Monitor Gas Calibration with Ozone Generators
EnvironicsĀ® Ambient Monitor Calibrator with Ozone Generators facilitate dynamic calibration of ambient air analyzers. These instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. All ozone generators are factory calibrated using a NIST traceable ozone standard. The Series 6100, Series 6103 and Series 9100 all meet or exceed U.S. Environmental Protection Agency ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
Emissions testing for industrial boilers and burners
Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don't worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350's compact design is better for working on a platform or small ...
By Testo, Inc. based in West Chester, PENNSYLVANIA (USA).
-
Premium
Compressed air and industrial gases solutions for steel industry
Energy savings solutions in steel industry. Steel production is one of the most energy consuming industries. Learn how compressed air and gasses like argon and nitrogen weigh on the bills of steel companies and what you can do to reduce the energy consumption. The heat and power needed to produce steel give a burden on CO2 emissions and energy bills of steel companies. That’s why steel mills are looking for ways to reduce their energy usage. The first thing that comes to mind for metal companies like ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Raw-gas monitoring for scrubber optimizing
The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Compressed air and industrial gases solutions for manufacturing of materials sector
Ensure and improve production capacity using a flow meter in the industry of materials manufaturing. A flow meter show you where, when and how much how you can optimize and thus save ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Compressed air and industrial gases solutions for food & beverage industry
Ensure and improve production capacity using a flow meter in the food & beverage industry. A flow meter show you where, when and how much how you can optimize and thus save ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Air pollution, emission and process monitoring systems for chemicals
ENVEA’s long standing involvement with manufactures of powdered chemicals such as TiO2 and carbon black has led to the development of a wide range of ambient, emission and process monitoring systems designed to overcome often challenging monitoring conditions including acidic condensation and potential contamination. Approved measurement and monitoring systems not only protect our environment by meeting and exceeding regulatory requirements but also provide valuable feedback on process performance providing ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Gas flow management solutions for food packaging (MAP) sector
Equilibrium Modified Atmosphere Packaging and Other Food Packaging Applications. More and more food packaging companies are utilizing Modified Atmosphere Packaging (MAP) or Equilibrium Modified Atmosphere Packaging (EMAP) to preserve the shelf life and/or appearance of their packed food. At Environics, we know it is essential that your MAP/EMAP gases be consistent and accurate in order to guarantee the desired quality in the end ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
Static and rotary torque sensors solutions for marine & shipping - vessel monitoring industry
Datum Electronics are a world leader in the supply of Marine Torsion meters and Shaft Power Meters which measure both the static and dynamic on-shaft torque and shaft power of drive shafts, propeller shafts, intermediate shafts, and generator shafts. Datum Electronics have both permanent and temporary Marine Torsion meters and shaft power meters which are highly adaptable and offer a range of outputs to suit your requirements. ...
By Datum Electronics Ltd based in East Cowes, UNITED KINGDOM.
-
Premium
Continuous Emissions Monitoring Calibration Systems (CEMCS)
The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the calibration of gas analyzers. ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
Air pollution, emission and process monitoring systems for minerals
ENVEA’s experience of working in the Mineral Industry has led to the development of an extensive range of unique ambient, emission and process monitoring solutions to suit often challenging process conditions. In addition to main stack emission monitoring and measurement, by closely monitoring process conditions such as solids flow, the measurement of material mass via non-intrusive, solid state powder mass measuring systems and proactive baghouse performance monitoring can improve process ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Air pollution, emission and process monitoring systems for food & pharma
High accuracy measurement and reliability in monitoring instrumentation is called for by Food and Pharmaceutical Processes. ENVEA’s unique capabilities allow the observation and control of many of the manufacturing functions found in these industries. From the measurement and control of emitted dust from dryer filter plant to the non-intrusive, solid state measurement of powder mass flow and the monitoring of process gas quality, ENVEA instrumentation provides Plant Operators with the opportunity to fine ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Air pollution, emission and process monitoring systems for incineration
ENVEA’s long association with the Incineration Industry includes supporting Process Operators to meet environmental obligations and the requirement for high performance instrumentation with quality assurance features for compliance reporting. In addition to the importance of regulatory compliance, the control and treatment of emissions from Incineration processes represents a significant proportion of overall costs, therefore, quality data from emissions and process monitoring provides valuable feedback on ...
By ENVEA based in Poissy, FRANCE.
-
Flow meters for the semiconductor processing
From bulk gas delivery to cleaning to purging operations, Sierra's mass flow meters and controllers offer the simplicity and robustness demanded in these applications. Our ability to handle corrosive gases, high flow rates and multiple gases with the same unit makes Sierra's mass flow meters and controllers a tool-makers ...
By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Industrial solutions for the thin film coating
Thin film deposition processes, e.g. reactive PVD (Physical Vapor Deposition), require a repeatable gas flow of the reactive gas to ensure reproducible film properties. With its industry-leading repeatability of < ± 0.15% FS and very small long term drift the Axetris MFC 2100 series supports you in making your equipment stable and easy to use for your ...
By Axetris AG based in Kaegiswil, SWITZERLAND.
-
Flow Measurement instrumentation for mass flow measurement & control flow solutions
We manufacture a variety of mass flow technologies for precision measurement of gases, liquids, and ...
By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Industrial monitoring solutions for the flue gas desulphurisation areas
Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the ...
By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you