Mass Flow Sensors Equipment For Monitoring And Testing Available In Bolivia
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000P Particulate and Flow sensors report Air Flow and a general Particulate loading and percent opacity in virtually any operating condition. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s 5000 and 4000-Series 2 & 3 Stage Brushless Blower, Automatic Flow Control Retro-Fit Kits are intended to either upgrade existing mass flow control systems, or can completely convert existing standard Brushed & Brushless Manual Speed Control High Volume Air Samplers. HI-Q’s 5000 and 4000-Series Retro-Fit Kits include a 2 or 3 stage brush-less blower, mounted in series ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-5000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a maintenance free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed maintenance-free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-4000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-6000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a touch screen user interface with a maintenance-free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed, maintenance-free motor. The speed of the motor is controlled by a programmable logic controller (PLC) that accepts a signal from a mass flow ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing environment and safety monitoring instruments as well as the latest demand at home and abroad, our company has launched a new generation DPM-6000 pm 2.5 measurement device with high accuracy, reliability, stability and economy. Our PM monitor can measure PM10, ...
-
Manufactured by Yuden-Tech Co., Ltd. (eyc-tech)based in TAIWAN
Adopting the differential pressure principle for air flow measurement. Enable bi-direction air flow measurement. Measures differential pressure, pressure, and temperature simultaneously. Calculate medium density and mass flow rate. Rugged and durable design for high temperature and high-pressure ...
-
Manufactured by Enviro Technology Services Ltd - part of Cura Terraebased in UNITED KINGDOM
The ZRE NDIR analyser is based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, this analyser produces highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length containing the gas sample to be analysed. As the beam passes through the ...
-
Manufactured by SOLTEC Novomoskovsky Mechanical Plant Ltd.based in RUSSIA
BM dosing pumps are applied on the manufactures where the technological processes demand accurate dosage of viscous heterogeneous components with interval of no more than 0.1 %, taking into account the outlet pressure. BM dosing pumps can be automated and allow the installation of wide range of additional options, such as charging neck, supporting screw conveyer, heating system of current part ...
-
Manufactured by AMS Analiticabased in ITALY
The GasCheck Basic sorbent tubes sampling devices, should be connected with a portable AirCube sampling pump, in both models COM2-TH and Gas-Pro. Each GasCheck basic, consist of 6 sorbent tube sampling support for standar chemical sorbent tubes or thermal desorption 6,35 mm OD sorbent ...
-
Manufactured by MBV AGbased in SWITZERLAND
The MAS-100 NT is the world's best-selling air sampler and the premium version of the portable MAS-100 instruments. It is used for microbial monitoring of air. Equipped with a high-precision mass flow sensor it stands for highest safety and is therefore mainly used in sensitive areas and cleanrooms. ...
-
Manufactured by RKI Analytical Instruments GmbHbased in GERMANY
The NC-1737 O2 and CO2 analysers are especially suited to pharmaceutical, food and beverage applications including: Head space analysis in closed packages. Head space analysis in cans. Continuous process measurement. It incorporates a novel zirconia oxygen sensor and an infrared CO2 measuring cell and comes with a variety of gas measurement ranges. The sample gas flow rate is measured using a ...
-
Manufactured by McMillan Companybased in USA
McMillan Model 50S Thermal Mass FLO-SENSORS are capable of measuring virtually any clean, dry gas as low as 0-20 sccm or as high as 0-100 Lpm! Repeatable results are achieved using a patented thermal mass flow sensor design. This proven design minimizes zero drift while maintaining fast response and linear outputs. Because of the compact size and economical cost of these products, the Model 50S ...
-
Manufactured by First Sensor AGbased in GERMANY
The WBA sensors offer mass flow measurement for air and gases based on a highly sensitive thermal measuring principle. The WBA series includes unidirectional as well as bidirectional flow ranges. The sensors achieve a very high accuracy over the complete measuring range in the positive as well as negative flow direction and feature fast response times and low power consumption. Typical ...
-
Manufactured by LeakMaster, Inc.based in USA
It’s leak detection simplified. LeakMaster’s 700 series is not only extremely fast, it’s repeatable, and, best of all, it’s user friendly. Add the fact that the 700 series is configurable for pressure decay leak testing, mass flow leak testing, or differential pressure decay leak testing and you can be confident you have one of the most versatile precision air leak ...
-
Manufactured by Gastec Corporationbased in JAPAN
The Model GSP-300FT-2 has been designed small and compact air sampling pump available with an integrated flowmetre for Hand-held, Personal or site sampling. This small size air sampling pump can be possible to carry on constant flow rate for 10 hours continuous sampling. This air sampling pump employs an extremely low noise air pump and automatic shut-off air pump by preset timer or volume for ...
-
Manufactured by McMillan Companybased in USA
McMillan Model 80SD Mass FLO-CONTROLLERS are capable of measuring and controlling virtually any clean, dry gas as low as 0-50 sccm or as high as 0-10 L/minute! Repeatable results are achieved using a patented thermal mass flow sensor design. This proven design minimizes zero drift while maintaining fast response and linear outputs. Because of the compact size and economical cost of these ...
-
Manufactured by iCenta Controls Ltdbased in UNITED KINGDOM
The CMS is a highly reliable and versatile series of gas mass flow meters that uses a µF (Micro Flow) sensor as its sensing element. The µF sensor is a MEMS thermal mass flow sensor capable of measuring ultra low flow rates. The integration of the µF sensor and advanced channel design technology has achieved high accuracy and high rangeability at a low ...
-
Manufactured by TSI Incorporatedbased in USA
TSI's Flow Meter design team can develop the precise mechanical configuration, performance characteristics, and electronic interface you need to optimize your design. The exceptional performance of these embedded flow sensors can enhance your product's performance and improve the time to market on new product development. OEM Mass Flow Sensor that can be calibrated for O2 with accuracy of ...
-
Manufactured by TSI Incorporatedbased in USA
TSI Series 4200 mass flow sensors are specifically designed to measure gas flow rates in embedded applications. The rugged housing with sealed electronics and locking connector make them highly reliable in more demanding environments. They feature a very low pressure drop, wide flow rate range and 20 millisecond response time. Series 4200 mass flow sensors are 100% calibrated and completely ready ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you