Showing results for: GC-MS (Mass Spectrometry) Equipment In Latin America
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Diam. 10 mm, pkg of 250 ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG RACK 19“ 2U PRO is able to generate up to 600cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG RACK 19 inch 2U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 10 mm, pkg of 50 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 11 mm, pack of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 11 mm, pack of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 9.5 mm, pack of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 9.5 mm, pack of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 10 mm, pack of 250 ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
L × I.D. 60 m × 0.32 mm, df 0.20 μm Application: A highly polar cyanosiloxane column specially tested for analyses of dioxins, specifically tetrachlorodibenzodioxin (TCDD) isomers. Because the phase is stabilized, it has a maximum temperature slightly higher than non-bonded cyanosiloxane columns USP Code: none Phase: • Stabilized • Proprietary Temp. Limits: • ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
L × I.D. 30 m × 0.25 mm, df 0.20 μm (Supelco) Application: A highly polar cyanosiloxane column specially tested for analyses of dioxins, specifically tetrachlorodibenzodioxin (TCDD) isomers. Because the phase is stabilized, it has a maximum temperature slightly higher than non-bonded cyanosiloxane columns USP Code: none Phase: • Stabilized • Proprietary Temp. ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
L × I.D. 60 m × 0.25 mm, df 0.20 μm Application: A highly polar cyanosiloxane column specially tested for analyses of dioxins, specifically tetrachlorodibenzodioxin (TCDD) isomers. Because the phase is stabilized, it has a maximum temperature slightly higher than non-bonded cyanosiloxane columns USP Code: none Phase: • Stabilized • Proprietary Temp. Limits: • ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Polymerically bonded, ethylenediamine-N-propyl phase that contains both primary and secondary ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG BASIC is able to generate up to 700 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). The HG BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
, and is completely maintenance-free. The HG 4U PRO is the ideal Hydrogen for all GC-FID detectors. The on-board CPU constantly control the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Dual layer SPE tube that contains both Supelclean ENVI-Carb (upper layer) & PSA (lower layer) SPE sorbents (separated by PE ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 9.5 mm, with injection hole, pack of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 10 mm, with injection hole, pack of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 11 mm, with injection hole, pack of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 9.5 mm, with injection hole, pack of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Molded Thermogreen LB-2 Septa diam. 11 mm, with injection hole, pack of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you