Material Failure Equipment For Monitoring And Testing Available In Canada
-
Manufactured by Greenbank Energy Solutions, Inc.based in USA
These devices can be used for the early recognition of flow disturbances in the transport of powders, dust, pellets and granules. This can reliably prevent problems caused by blockages, an absence of material or system failures, for instance. The measurement process of the FlowSwitch 510M is based on the physical principle of the Doppler Effect. This device can reliably prevent problems caused by ...
-
Manufactured by KUS USA, INCbased in USA
Liquid Level Sender with American standard output (240 ohms at empty, 33 ohms at full). For customized outputs range, such as other ohm values or voltage (V) or current (mA), or if you need lengths other than 4″ – 60″, please contact us directly for more ...
-
Manufactured by Instron – Division of ITW Ltd.based in UNITED KINGDOM
Many materials exhibit different behaviors under various strain rates, i.e. they have strain rate dependent properties. Characterizing these dynamic properties across a wide range of velocities becomes very important in applications where components are exposed to high strain rates, especially on investigating material failure and also identifying the most optimal design for ...
-
Manufactured by Loglogicbased in UNITED KINGDOM
A variant of the original Softrak 65, which has proved invaluable in managing Fens, uplands and other delicate habitats over the last 10 years, the Softrak 75 with a 75 hp Deutz engine is designed to satisfy the needs of the contractor or reserve manager who needs to manage larger areas but still maintain the extremely low ground pressure and minimal damage to sensitive terrains of the original. ...
-
Manufactured by CECO Environmentalbased in USA
With Venturi scrubbers, the dirty gas entering a scrubber is forced at high velocity through a Venturi where it collides with scrubbing water. The tiny water droplets capture particles through impaction and diffusion. The dirty water is then removed in a cyclonic separator and discharged into a recycle tank. Some of the liquid is continuously purged to limit the solids concentration and allow ...
-
Manufactured by Chongqing Leeb Instruments Co., Ltd.based in CHINA
English menu, convenient and easy for operation.. Hardness standards HL.HRB.HRC.HB.HV.HS can be used, free conversion between different standards. Can calibrate HL ,HRC,HB.. On the basis of Leeb hardness measurement principle, can be used to detect a variety of metal materials for accurate and. Automatically identify the 8 types of impact devices, replacing without re-calibration.. Small, ...
-
Manufactured by Sapcon Instruments Pvt. Ltdbased in INDIA
Compact vibrating fork level switch for free-flowing solids, granules and powders. The working principle of vibrating fork level switch is based on vibrating tuning fork’s natural frequency and amplitude measurement. A specially shaped tuning fork is continuously vibrating at its natural frequency using piezo-electric elements and changes in amplitude in the presence of application media ...
-
Manufactured by SPECTRO Analytical Instruments - AMETEK, Incbased in GERMANY
The new SPECTRO iSORT is a battery-powered, hand-held spectrometer for on-site identification and analysis of all common metal alloys. It uses an efficient arc excitation and requires neither argon nor a radioactive ...
-
Manufactured by Global Wrapbased in USA
Winter is no doubt the most challenging season for the construction industry. High winds, snow, sleet and ice work against the critical path of a project. Heavy winds can tear traditional tarps apart and have them flapping dangerously off the face of the structure, or pulling the scaffolding down. ...
-
Manufactured by Loglogicbased in UNITED KINGDOM
Based on the original Softrak, which has proved invaluable in managing Fens, uplands and other delicate habitats over the last 10 years, the Softrak 120 with extended chassis and undercarriage and high-powered engine is designed to satisfy the needs of the contractor or reserve manager who needs to manage larger areas but still maintain the extremely low ground pressure and minimal damage to ...
-
Manufactured by Pipetech Corporationbased in CANADA
The Pikotek PGE is a non-critical service gasket designed for electrical flange isolation and/or general sealing applications. This gasket is suitable for use in raised-face flanges up to ANSI class 600 (or equivalent) and is excellent for isolating flanges made of dissimilar metals or where prevention of flange face corrosion is ...
-
Manufactured by DeepMaterial (ShenZhen) Co.,Ltdbased in CHINA
DeepMaterial provides a comprehensive range of one-component and two-component epoxy and acrylic structural adhesives, suitable for structural bonding, sealing and protection operations. DeepMaterial's full range of structural adhesive products have high adhesion, good fluidity, low odor, high definition clarity, high bonding strength and excellent stickiness. Regardless of curing speed or high ...
-
Manufactured by Mütec Instruments GmbHbased in GERMANY
These devices can be used for the early recognition of flow disturbances in the transport of powders, dust, pellets and granules. This can reliably prevent problems caused by blockages, an absence of material or system failures, for instance. The measurement process of the FlowSwitch 510M is based on the physical principle of the Doppler effect. This device can reliably prevent problems caused by ...
-
Manufactured by Mütec Instruments GmbHbased in GERMANY
These devices can be used for the early recognition of flow disturbances in the transport of powders, dust, pellets and granules. This can reliably prevent problems caused by blockages, an absence of material or system failures, for instance. The FlowSwitch 600E is used to monitor the flow of solids in pipelines, such as pneumatic conveyor systems or falling distances, from a few g/h to several ...
-
Manufactured by Eltek Limitedbased in UNITED KINGDOM
The Eltek VTS Voltage Transducer enables Squirrel voltage inputs to be safely connected to an AC supply for AC voltage measurements. The VTS is potted for rugged and reliable performance. The item is non-repairable in the unlikely event of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you