Material Flow Monitoring Applications available in Oregon
-
Premium
Air pollution, emission and process monitoring systems for minerals
ENVEA’s experience of working in the Mineral Industry has led to the development of an extensive range of unique ambient, emission and process monitoring solutions to suit often challenging process conditions. In addition to main stack emission monitoring and measurement, by closely monitoring process conditions such as solids flow, the measurement of material mass via non-intrusive, solid state powder mass measuring systems and proactive baghouse performance monitoring can improve process ...
By ENVEA based in Poissy, FRANCE.
-
Premium
On-line gas, particulate analyzers, flow monitors, data acquisition for construction materials industry
The production of construction materials has a long tradition. Thus the production processes in some places have not yet been adapted in all areas to the present state of art. With our measuring systems we are improving and modernizing production processes in cement and mineral plants as well as in the construction material chemistry. Continuous mass flow measurement, online moisture measurement and dust monitoring systems are used frequently in this sector. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Compressed air and industrial gases solutions for manufacturing of materials sector
Ensure and improve production capacity using a flow meter in the industry of materials manufaturing. A flow meter show you where, when and how much how you can optimize and thus save ...
By VPInstruments based in Delft, NETHERLANDS.
-
SFD-2 - Microwave Solids Flow Monitor for Detecting Coal Flow Problems in Power Plants
A coal-fired power plant in India, Hidalco Industries, needed a sure-fire way to detect the flow or no-flow of coal from the feeders to the furnaces. A plugged chute or equipment failure would possibly go unnoticed until a more serious problem occurred. Knowing whether the coal was positively feeding into the furnaces was of paramount importance to the efficient operation of the power plant. How can a coal-fired power plant economically and reliably determine if coal feed is flowing when needed? ...
By Monitor Technologies, LLC based in Elburn, ILLINOIS (USA).
-
Analytical instruments for mass spectrometry
A variety of MS techniques – such as Quadrupole MS, Time-of-Flight (TOF) MS, Ion Mobility Spectroscopy (IMS), etc. have been developed in the past decades, providing new tools for materials analyses. Flow control for mass spectrometry (MS) requires high repeatability and small temperature- and pressure dependency. This is important to achieve a high resolution and instrument resolution. Depending on the size and electrical interface requirements, the Axetris MFC modules or MFC standalone types are the ideal ...
By Axetris AG based in Kaegiswil, SWITZERLAND.
-
Dry bulk material processing for the cement industry
The manufacture of cement combines a variety of raw ingredients such as limestone, clay or shale. These raw materials are extracted from the quarry crushed to a very fine powder and then blended in the correct proportions. The resulting raw mix is fed into a cement kiln which heats them to extremely high temperatures of about 1400 C to 1500 C. The abrasiveness of the material is a major factor on the wear of equipment and the extreme high temperatures of the process require specialized ...
By Wm. W. Meyer & Sons, Inc. based in Libertyville, ILLINOIS (USA).
-
Liquid/solid separation equipment for precious metals - gold and silver
Countercurrent Decantation (CCD): Rock passes into a dump hopper and is then transferred to a vibrating grizzly screen. The oversized material is sent to a jaw crusher. The crushed product is combined with the grizzly undersize and the ore is conveyed to the coarse ore bin. ...
By WesTech Engineering, LLC based in Salt Lake City, UTAH (USA).
-
Real Time Tracking Systems for Mining, Oil & Gas, Underground Construction Sites
Managers in mining industry are under pressure to optimize maintenance, workforce, reduce costs, and establish a safe working environment. Litum can help monitor usage of every equipment, location and movement of employees, and create analytics help improve workflows and ...
By Litum IoT - a Subsidiary of the Litum Group based in Alsancak, TURKEY.
-
Industrial screening solutions for recycling industry
Since our founding, VibraScreener has been committed to creating innovative products that help our clients meet the challenges of a changing world. With all the global environment trends and limitation of resources we face today, recycling has become necessary to the preservation of our planet and to be able to get the most out of our materials. Therefore our commitment to the industry is serious, and we take pride in helping our customers contribute to a more environmentally friendly ...
By VibraScreener Inc. based in Charlotte, NORTH CAROLINA (USA).
-
Liquid Storage Tanks for Oilfield
Tanks used in this field are typically referred to as ‘frac’ tanks, the 500 barrel Frac Master being the industry benchmark. ‘Frac’ is an abbreviation for fractionation, a term that refers to an actions which occur when bringing a new well online or reworking an existing well to stimulate existing ...
By MJK Custom Fabrication and Coatings, LLC based in Ogden, UTAH (USA).
-
Ultrasonic Instrumentation for Fracking Liquid and Solid Flow Applications
Fracking is another method used to extract oil and gas, using the process of injecting high pressure into subterranean rocks and boreholes so as to force open existing fissures and extract the oil or gas. Pulsar Measurement provide many different flow and level solutions to this market, from flow monitoring, to level monitoring, pump control and sand in oil detection. There is plenty of choice within our portfolio for a measurement solution perfectly suited to your ...
By Pulsar Measurement based in Birmingham, UNITED KINGDOM.
-
Ultrasonic instrumentation for solids flow and level monitoring applications
Solids flow and level monitoring refers to any application where solids and/or liquids need to be measured to record flow rate or detect potential blockages. PulsarGuard acoustically detects solids and clogs in the vacuum ...
By Pulsar Measurement based in Birmingham, UNITED KINGDOM.
-
Continuous Material Flow Monitoring for Production Plants
By Seid based in Sandnes, NORWAY.
-
SFD-2 - Microwave Solids Flow Monitor for Plugged Chute or Blocked Chute Detection
Plugged chute or blocked chute detection...If properly implemented, a level sensor / switch or solids flow monitor can indicate a condition consistent with a flow stoppage within a chute, hopper or conveying line. Depicted here are some of the more common methods for plugged chute detection. ...
By Monitor Technologies, LLC based in Elburn, ILLINOIS (USA).
-
DDI Solutions for Grey Water Heat Recovery
Heating water for showers, laundry, dish-washing and other uses costs you money - and it's money that literally flows right out of your building and into the sewers. Fight back by installing a DDI heat exchanger that circulates that waste heat past the incoming cold water flow. The heat exchanger warms the incoming flow, reducing the operating cost of your water heaters, boilers, laundry operations, dishwashers and other energy users. Savings can be considerable, and ongoing. For example, consider a hotel, with ...
By DDI Heat Exchangers Inc. based in Dollard-Des-Ormeaux (Montreal), QUEBEC (CANADA).
-
Electrical Based Tomography Systems for Slurry Flow
Slurry transportation is required in a diverse range of sectors, from food to minerals processing; and oil sands processing to nuclear waste management. As a process it requires significant levels of energy and the abrasive nature of materials used can lead to ongoing issues of pipeline ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
ENiGMA - Physical Water Treatment System for Industrial
Most industrial companies use significant volumes of cooling and/or hot water in their facility. In 70% of the UK, it is often difficult or expensive to maintain efficient heat exchanger performance. Chemical treatment is both expensive and potentially ecologically damaging and has a negative impact on ...
By Environmental Treatment Concepts Ltd (ETC) based in Knowle, UNITED KINGDOM.
-
Industrial Analyzers for Iron and Steel
Real-time continuous analysis in production of iron and steel. Many producers of iron and steel are struggling with unstable content of such elements as Si, Ca, Al, Mg, C etc. in iron ore, sinter, fluxes, coal and other raw materials, as their use in the production process not only lead to customer claims due to lower and unstable quality of sinter, pellets, iron and steel, but may also significantly increase production costs, i.e. coke and energy consumption in sintering and blast furnace production. Thanks to ...
By Lyncis based in Vilnius, LITHUANIA.
-
High-solids cross flow filtration and separation solutions for metals finishing sector
Industries including automotive, aerospace and electronics utilize processes that include metal finishing and metal working to produce or plate products and components. These processes, such as electroplating, can often result in wastewater contaminated with heavy metals that require treatment prior to recycling or discharge. Porex Tubular Membrane Filters (TMF™) provide the best option for many recycling or discharge treatment systems. The Porex membranes combine extremely rugged, durable construction for ...
By Porex - Filtration Group based in Fairburn, GEORGIA (US) (USA).
-
High-solids cross flow filtration and separation solutions for lime softening / RO reclaim sector
RO Reclaim/Zero Liquid Discharge (ZLD) with Lime Softening for Industrial Processes including Power Plants, Mining Industry, Steel Industry. Typical recycling, reuse and process water systems use Reverse Osmosis (RO) technology as the method of decreasing the level of ions in process water. RO recovery rates normally range from 50-75%, therefore 25-50% of the RO feed water is discharged as wastewater. With the increasing cost of water and waste discharge, more companies are looking to recover and reuse RO reject ...
By Porex - Filtration Group based in Fairburn, GEORGIA (US) (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you