Material Sampling Applications available in New Mexico
-
Premium
Measurements Solutions for Optical Material Homogeneity
An important property of an optical component is the variation of the refractive index of the material from which it is made, broadly referred to as homogeneity. Material inhomogeneity causes variation of the refractive index in a glass, which can be in the form of sharp, cord-like regions called striae or it can occur as a gradient of the refractive index through a larger region of the sample. Material index variations must be qualified to ensure their impact is within tolerance for a particular optical design ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Recycling equipments for shredding hazardous waste
The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Flame Photometer for Measurement of Low Concentrations of Sodium in Cement
This method allows the direct measurement of low levels of sodium without prior extraction procedures, which minimises possible sources of contamination. ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
FT-NIR analysis for verifying raw materials through plastic and paper packaging industry
When raw materials are purchased it is critically important to verify that the correct materials have been received for quality, regulatory, and economic reasons. Often these raw materials, such as food or pharmaceutical ingredients, are transported in plastic bags or paper packaging. Packaging can be opened to perform a verification test using analytical techniques such as assays or infrared spectroscopy. ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Cleaners for Firearms industry
Safe and effective cleaners for all firearms including black powder and muzzle loaders. Quickly and easily removes carbon deposits, powder residue, bore foulants, oxidation stains, and old oil and grease deposits. Unsurpassed detergency on carbon blue and stainless ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Cleaners for Optics industry
Our precision cleaners provide consistent results with every use and leave surfaces completely clean. Our products have long been used in pre-sanitization washes of optical devices such as fiber-optic glass, microscope and telescope lenses and light detention instruments. Machining oils, burrs, metal fines, and other soils are easily removed from glass or quartz ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Cleaners & assembly lubricants for Laboratory industry
Whether you need to remove biological debris, fingerprints, protein, starch, or dye, our cleaners provide consistent results. An economical 1-2% concentration in water is effective in most cleaning applications. Our laboratory cleaners are excellent for use on flasks, pipettes, slides, stainless steel, plastic, and other laboratory equipment and surfaces. When rinsed properly, our cleaners leave no ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Cleaners for Food and beverage industry
IPC offers a full line of precision cleaners that provide consistent results with every use and leave surfaces completely clean. An economical 1-2% concentration in water is effective in most cleaning applications. Typical uses include removing protein, starch, grease, fat, gum, oil and baked on soil from processing equipment, lines, and filter ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Cleaners for Oil & gas industry
IPC’s cleaners are used throughout the oil and gas industry for cleaning equipment and filter membranes. They are excellent alternatives to hazardous, solvent based degreasers. Our cleaners remove oils and greases, sludge, mud, cutting fluids, flux, and petroleum residues. Clean equipment helps to ensure that operations run smoothly and ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Saran Bag application
Title : Preliminary Sampling Methodology and Analytical Procedures for Ambient Sulfur Hexafluoride, Corporate Author : ARMY MEDICAL ENVIRONMENTAL ENGINEERING RESEARCH UNIT EDGEWOOD ARSENAL MD Personal Author(s) : Luckan,Susan K. ; Cooper,William J. Report Date : JAN 1973 Pagination or Media Count : 23 Abstract : A preliminary evaluation of techniques of sampling and gas chromatographic analysis for low levels of sulfur hexafluoride was conducted to determine the most feasible method for available equipment. ...
By Analytical Specialties, Inc. based in Naples, FLORIDA (USA).
-
Laboratory and industrial ovens and furnaces solutions for food/feed industry
One of the most frequent applications for furnaces is the ashing of food and feedstuff samples – Carbolite’s AAF ashing furnaces remove all organic material from a sample through heating in air. The objective of the test is often to establish the total mineral content or is used as an intermediate step in sample preparation to allow subsequent characterisation by elemental analysis. Often the final objective is to determine the presence or absence of constituents which remain in the residual ash. This ...
By Carbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM.
-
Cleaners for Pharmaceuticals & biotechnology industry
Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven effective in critical cleaning applications including mixing tanks, tablet presses, fluid lines, batch process tanks, filter membranes, and other equipment. An economical 1-2% concentration in water is effective in removing gels, emulsifiers, oils, titanium dioxides, dyes, silicons, fragrances, petrolatum, paraffins, insoluble salts, oxides, blood and ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Cleaners for Parts cleaning industry
We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from parts and equipment without the hazards associated with solvents. When rinsed properly our cleaners leave no residue and your precision parts are ready for further processing. Products are available for manual and automated cleaning systems. only qualitative production for all transportAn economical 1-2% ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Cleaners for industrial Manufacturing industry
We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from stamped metal, parts and equipment without the hazards associated with solvents. Our cleaners are also proven in removing soils from filter membranes used in wastewater treatment ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Cleaners for Metalworking industry
Effective cleaning of machined or formed parts is a key step in all manufacturing processes. At IPC, we understand for a surface to be successfully plated or painted, it must first be free of contaminants. Our cleaners remove dirt, cutting oil, metal fines, flux, and other particulates from stamped metal and precision parts without the hazards associated with solvents. An economical 1-2% concentration in water is effective for most cleaning applications. Our cleaners are also proven in removing soils from filter ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Chemical identification solutions for the Material inspection and QA sector
Our solutions enable rapid on-the-spot verification of raw materials at the loading dock, so you can quickly identify any faulty or substandard deliveries. They also enable rapid quality assurance checks as end product leaves the factory. All the data is collected to provide you with a digital record that enables full traceability later on, if ...
By Serstech AB based in Lund, SWEDEN.
-
Stack Emission Sampling for Heavy Metal Sampling System
This method is dedicated to the sampling of discharged heavy metals in emissions coming from hazardous city waste incinerators. The elements analyzed are: Antimony, Arsenic, Cadmium, Chromium, Cobalt, Copper,Magnesium,Nickel, Lead, and Thallium. This method is applicable to each one of these specific elements in the concentration range of 0.005 mg/m3 to 0.5 mg/m3. ...
By AMS Analitica based in Pesaro, ITALY.
-
Gemstone Identification Using Raman Microscopy
The gemstone industry suffers massively from forgeries that even highly experienced jewellers cannot determine. Read this application note to discover how Raman microscopy offers itself as a useful technique in the identification of gemstones. Available: ...
By Edinburgh Instruments - TECHCOMP Group based in UNITED KINGDOM.
-
Discrimination of Cooking Oils Using Raman Spectroscopy
Cooking oils are one of the main components of the human diet. Adulteration of extra virgin olive oil with cheaper oils is a common problem in food fraud. This application note highlights how Raman spectroscopy in combination with chemometrics can be ...
By Edinburgh Instruments - TECHCOMP Group based in UNITED KINGDOM.
-
Whisky Analysis by Raman Spectroscopy
Raman spectroscopy is an analytical technique which can be used both quantitatively and qualitatively. This application note details the quantitative use of Raman spectroscopy to determine ethanol content in samples of whisky. Qualitatively, Raman ...
By Edinburgh Instruments - TECHCOMP Group based in UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you