Material Testing Applications

24 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Material Testing ×

Stack Testing for Cement Kilns

by AirSource Technologies, Inc.     based in Shawnee, KANSAS (USA)

CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

Innovative pump technology for oil and gas industry

by EDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG     based in Kiel, GERMANY

Medium-specific solutions, equipped with oil and gas tested materials and components, dimensioned for each application. Our engineers have the task of finding an energy-efficient, safe and powerful EDUR solution for this.

Construction Xray Inspection

by Geomorph Instruments     based in Piraeus, GREECE

A non destructive test for concrete plays a central role in determining the quality of cement casting. Bubbles and sediment in the cement weaken the construction considerably. NDT testing equipment is also used in construction to determine the quality of the wired foundations. One of the challenges of construction NDT is the possible difficulty in reaching testing locations. A non destructive test for concrete conducted with a portable digital radiography system provides an excellent inspection tool. Combining mobility with phenomenal penetration capabilities and the highest quality digital radiology imaging, Our portable X-ray inspection systems provide a comprehensive solution to construction NDT technicians.

Positive material identification for the metal alloy industry

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

Positive Material Identification is a well accepted analytical materials testing and materials identification technique used within the metal alloy industry. It guarantees the materials chemical composition as required for quality control.

For Sports Facilities

by Troy Acoustics Corporation     based in Brunswick, GEORGIA (US) (USA)

Troy Acoustics and its personnel have been involved in the Broadcasting, Movie and Recording industries for well over thirty years. Troy Acoustics has designed and installed acoustical treatments for dozens of facilities, for both new and updating purposes. The Troy System products, designs and installation techniques have provided quality, noise free, environments for all types of facilities where original programming is produced, enhanced or modified.

Noise monitoring solutions for material testing

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

With today`s growing focus on noise control issues and the emergence of sound quality as an important aspect of product design, acoustic material testing is becoming increasingly relevant to engineers, designers and manufacturers from a broad range of industries. Acoustic material testing is the process by which the acoustic characteristics of materials are determined in terms of absorption, reflection, impedance, and admittance, including transmission loss.

Meteorological monitoring

by Casella     based in Kempston, UNITED KINGDOM

A range of traditional manually read instrumentation for the measurement of surface meteorological parameters.

Fence line monitoring around an industrial site or airport

by AQMesh     based in Stratford-upon-Avon, UNITED KINGDOM

Monitoring the potential escape of pollutant gases from industrial sites or from airports can be difficult to achieve due to changing weather conditions, which may require a large number of monitoring stations downwind of the escapes.

Application package raw materials

by Fluxana GmbH Co. KG     based in Bedburg-Hau, GERMANY

Fusion technology is ideal for analysing oxidic materials like minerals or raw materials. It performs with the highest precision possible in xrf sample preparation. However, many laboratories cannot specify exactly what material they have to analyse. Therefore FLUXANA has created a wide range oxidic application program to allow complete analysis of the unknown material. The concentration ranges and elements of interest can be adapted to customer needs. It contains all parts to perform a complete raw material (oxidic materials) calibration with 14 elements for cement, glass, ceramic and raw materials industry. FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

Continuous emissions monitoring for palm oil plants

by Opsis AB     based in Furulund, SWEDEN

Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several locations.

Continuous emissions monitoring for brick plants

by Opsis AB     based in Furulund, SWEDEN

Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of maintanence.

XRF analysis for positive material identification

by Niton UK Limited     based in Woodmancott, Winchester, UNITED KINGDOM

Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

Ground Penetrating Radars (GPR) for Ice and Snow

by Transient Technologies LLC     based in Kyiv, UKRAINE

GPRs can also be applied to measure ice and snow thickness and explore snow structure. Besides, you can explore ground surface relief that is located under ice and snow masses.

Weather Monitoring Systems for calibration and test fixtures

by Climatronics Corporation     based in Bohemia, NEW YORK (USA)

Climatronics remains committed to the needs of our customers and the requirements of the regulatory compliance markets that we serve. We offer a full compliment of test equipment to support field audits and calibration of our sensors and systems. Additionally we maintain a calibrated wind tunnel at our headquarters and offer documented NIST-traceable calibrations on most of our sensors. We have a fully developed and approved quality assurance program which insures the validity and integrity of our calibration procedures.

Asphalt Applications Testing PAH Content

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

New regulations require testing asphalt for PAHs. Sitelab's UVF-3100D and TD-500D analyzers can test asphalt quickly and accurately. Results takes less than 5 minutes. The equipment is easy to operate.

Ground Penetrating Radars (GPR) for Roads and Bridges Construction

by Transient Technologies LLC     based in Kyiv, UKRAINE

The roads and bridges construction and repair demand of careful investigation of road surfacing state, quality of used concrete and geological assessment of ground structure under roads to find any heterogeneity. GPRs can be applied here for: tunnels, road surface thickness measure, runways state assessment. The important advantage of GPRs using – quick road surface assessment.

Meteorological systems for weather sensors, components & accessories

by Climatronics Corporation     based in Bohemia, NEW YORK (USA)

At the core of Climatronics’ meteorological monitoring systems is a complete complement of weather sensors, components and accessories. These weather sensors cover the range of each variables’ environmental range, and can be provided with a level of accuracy that matches each user’s requirements.

Air monitoring equipments for material emissions and product testing

by Gradko International Ltd     based in Winchester, UNITED KINGDOM

A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals into the air we breathe. The REACH regulation places the responsibility on manufacturers and importers to test their products and provide safety information to the purchaser, end user or consumers.

Continuous Monitoring of Surface Water

by SORBISENSE     based in Tjele, DENMARK

The Sorbisense method is especially suitable for measurements in dynamic environments. For example, in rivers, streams and lakes.

The method is innovative and allows you to implement continuous and cost effective measurements in both urban and in rural areas. For example, measuring the leaching of nutrients from the cultivation of wetlands and measuring water quality in rainwater and sewage.

Need help finding the right suppliers?

Let the XPRTs do the work for you