Only show results in Virginia? Ok

material testing Applications

  • Premium

    Instruments and analyzers for outdoor material testing

    Weathering of materials is most often an irreversible process affecting the cosmetic properties or strength of materials. This aging process is mainly driven by UV radiation, Heat and reactive elements in the atmosphere, for example chemical contamination. The plastic fabric of the product can dry and therefore weakened. The solar load can overheat the products and change material properties irreversibly. A common method to test the deterioration of materials is to expose materials to sun light and...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Air monitoring equipments for material emissions and product testing

    A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals...

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Noise monitoring solutions for material testing

    With today`s growing focus on noise control issues and the emergence of sound quality as an important aspect of product design, acoustic material testing is becoming increasingly relevant to engineers, designers and manufacturers from a broad range of industries. Acoustic material testing is the process by which the acoustic characteristics of materials are determined in terms of absorption, reflection, impedance, and admittance, including transmission loss.

  • Stack Testing for Cement Kilns

    CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Asphalt Applications Testing PAH Content

    New regulations require testing asphalt for PAHs. Sitelab's UVF-3100D and TD-500D analyzers can test asphalt quickly and accurately. Results takes less than 5 minutes. The equipment is easy to operate.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Stack Testing for Cement Production Facility

    LIMESTONE AND CEMENT PRODUCTION INDUSTRY: Conducted a facility-wide evaluation and NSPS performance test program of a major limestone and portland cement production facility.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Smoke generator device for building envelope, energy studies & air tightness testing

    The air tightness or leakage rate of a building is the uncontrolled flow of air through holes, gaps and cracks in the fabric of a building, which may not be detectable simply by looking at the outside of the building. Filling a building or void with smoke and pressurising that volume, will result in a visible discharge of smoke from any problem areas. Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with...

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Premium

    Laboratory Weighing - Formulation

    No matter whether flavorings, spices, or pharmaceutical powders are involved, formulation requires precision. Incorrect mixtures are costly and may even be dangerous. Irrespective of the complexity of your formulas, how many materials you use, and whether the quantities are large or extremely small: METTLER TOLEDO formula-weighing solutions can fulfill all your requirements.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Determination of preservatives (benzoic, sorbic acids and their salts) and sweeteners (acesulfame K, saccharine and its salts) in food products and raw materials, and dietary supplements

    Various food additives – preservatives (benzoic acid, sorbic acid, and their salts), sweeteners (Acesulfame K, saccharine and its salts) and others are widely used in food industry for the improvement of food products properties and extension of storage life. The amount of these additives in food products is regulated by technical instructions and other norms. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Control Panel-Material Handling Applications

     Tredwell offer control panel design and manufacture, which allow us control the quality of every panel required for every project. Our experienced and professional team of design engineers and assembly technicians manufacture, test and ship control panels ranging from small push button enclosures, to large motor control panels.

    By Tredwell Electrical Ltd based in Limerick, IRELAND.

  • XRF analysis for positive material identification

    Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Premium

    Laboratory Weighing - Density Measurement

    Density determination using the buoyancy method. Density determination is used in many areas to characterize certain properties of a product or material. Density determination applications are not only numerous, but also frequently associated with very specific requirements. METTLER TOLEDO offers a range of hardware and software options for determination of density using the gravimetric measuring method.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    UV fluorescence technology for raw water intake monitoring industry

    Naturally occurring organics in raw water are typically removed with chemicals. Total Organic Carbon (TOC) analyzers in the water treatment system can alert technicians when generic organic material is present but cannot differentiate between natural organics, such as algae or decomposed plant matter, and hydrocarbons. Using UV fluorescence technology, a properly configured TD-4100XD can alert operators to upsets caused by hydrocarbons such as gasoline, diesel, fuel oil, and crude oil.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Construction Xray Inspection

    A non destructive test for concrete plays a central role in determining the quality of cement casting. Bubbles and sediment in the cement weaken the construction considerably. NDT testing equipment is also used in construction to determine the quality of the wired foundations. One of the challenges of construction NDT is the possible difficulty in reaching testing locations. A non destructive test for concrete conducted with a portable digital radiography system provides an excellent inspection tool. Combining...

    By Geomorph Instruments based in Piraeus, GREECE.

  • Premium

    Corrosion-resistant materials for Sulfur & capping compounds industry

    Sauereisen No. 600 flake Basolit Sulfur Capping Compound has been used for many years by concrete testing laboratories for testing concrete cylinders for comprehensive strength.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the construction industries

    Common examples of construction applications include curing concrete, structural testing, temperature monitoring of building materials, vibration monitoring, and more. CAS DataLogger offers many durable and weatherproof data logging solutions monitoring temperature, vibration, pressure, force, and more, along with vibrating wire strain gauge support.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Application package FLUXANA RAW

    This application package is a 'ready to go' calibration kit for xrf instruments. It can, for example, contain all parts to perform a complete raw material (oxidic materials) calibration with 14 elements for cement, glass, ceramic and raw materials industry: - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 7x control samples for validation - Flux FLUXANA application packages include always the...

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Laboratory instruments solutions for surface finishing industry

    The coating and finishing of surfaces using electroplating techniques is a highly sophisticated process. Be it the finishing of metal parts or the coating of printed circuit boards, the quality required in the intermediate and end products is only achieved if the composition of the process baths is right. At the same time, rising costs of raw materials and energy make it absolutely essential to drive production as efficiently as possible. As a leading manufacturer of instruments for chemical analysis we know...

    By Metrohm AG based in Herisau, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you