MCERTS Applications in Asia & Middle East
-
Premium
Ambient air quality monitoring solutions for street-level monitoring
To measure the air quality in a city is a challenge. A large number of gaseous components need to be measured with high accuracy. The monitoring site needs to be representative for the city and the system has to be easy to maintain and calibrate. The OPSIS open-path monitoring systems provide a flexible solution, giving the average concentration for an area. A single OPSIS system can measure all relevant gaseous components set by the authorities, such as NO, NO2, SO2, O3, BTX, ...
By OPSIS AB Distributor in Shanghai, CHINA.
-
Premium
Gas monitoring instruments and systems for stack testing
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
By Gasmet Technologies - a Nederman company Office in Kowloon Bay, CHINA.
-
Premium
Ambient stations for ambient air quality monitoring
Ambient air monitoring involves the measurement of 'representative' air in urban, industrial and rural areas. These measurements are used to determine the human exposure to pollutants and can be combined with trace/background ...
By OPSIS AB Distributor in Shanghai, CHINA.
-
Premium
Air pollution, emission and process monitoring systems for power generation
ENVEA’s involvement with the Power generation industry over many years has led to the development of a unique range of process optimization solutions, as well as approved (TÜV and MCERTS) technologies for in-stack measurement of gas, particulate and flow concentration. They allow to optimize the whole-plant’s efficiency through measurement & control, facilitate legislative compliance, support ISO 14000 objectives and save operational costs by reducing plant’s maintenance requirements and ...
By ENVEA Office in Chaoyang District, CHINA.
-
Premium
Gas analyzers for the food and beverage industry
Detecting CO2 impurities: Ammonia, Acetaldehyde, Benzene, Total Sulfur Content, Total Hydrocarbons, SO2, COS. Carbon dioxide (CO2) is a commonly used additive in food and beverage industry (e.g. for soft drink, brewery, and champagne carbonation). Its fabrication process can lead to the presence of impurities such as aromatics, BTEX, ammonia, acetaldehyde, Total Hydrocarbons and sulfur compounds (Total Sulfur Content, SO2, COS, ...
By Chromatotec Group Office in Beijing, CHINA.
-
Premium
Ambient air quality monitoring solutions for urban air quality monitoring
To measure air quality in the ambient air is a challenge. The monitoring site needs to be representative and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high ...
By OPSIS AB Distributor in Shanghai, CHINA.
-
Premium
Ambient air quality monitoring at airports
To measure the ambient air quality at airports is a challenge. The monitoring site needs to be representative for background levels and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high availability. The OPSIS DOAS system provides the user with a fast system that gives high availability at low cost. The impact of aircraft take-offs and landings can easily be followed on-line. The OPSIS system can also monitor fugitive emissions from ...
By OPSIS AB Distributor in Shanghai, CHINA.
-
Premium
Ambient air quality monitoring solutions for benzene fence-line monitoring
To monitor benzene emissions can be a challenge, but OPSIS makes it easy. Benzene is an aromatic hydrocarbon liquid that evaporates quickly if exposed to ambient air. It is one of the most commonly used substances in the chemical industry and it is known to cause cancer. For this reason, refineries in the United States must start monitoring fugitive emissions of benzene from January 30, 2018. This is part of the 2015 U.S. EPA Petroleum Refinery rule. In case a yearly rolling average of benzene concentrations ...
By OPSIS AB Distributor in Shanghai, CHINA.
-
Air quality monitoring for regulatory purposes
Air quality monitoring for regulatory purposes requires instrumentation, systems and procedures that meet international standards such as those described by the USEPA, MCERTS or the European Union. Ecotech offers solutions that meet this ...
By Acoem Australasia Distributor in Kota, INDIA.
-
EPR waste minimisation monitoring for wastewater treatment industry
The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a ...
By Pollution & Process Monitoring Ltd Distributor in Shanghai, CHINA.
-
Aerosol and particle technology for environment industries
Fine dust is generated by industrial exhaust gases but in particular due to traffic. Environmental pollution is therefore caused particularly by exhaust gases of diesel-engined vehicles (diesel soot) but on the other hand also by abrasion of street, tyres and brakes and its ...
By Palas GmbH Distributor in Bangalore, INDIA.
-
Ultrasonic Instrumentation for Flow Monitoring Applications
During many different processes throughout the metals and mining sector, there is often a lot of excess production of water. Some of this water may indeed be wastewater and will need treating before being discharged back into the environment. Pulsar Measurement offer a range of different flow solutions, from open channel flow, to full and partially filled non-contacting pipe flow. Some of the discharge may be required to be measured to an MCERT standard and we are proud to supply a number of accredited methods to ...
By Pulsar Measurement Office in Klang, MALAYSIA.
-
Liquid Level and Flow Sensors for Beverage Processing Plants
More and more food and beverage companies are now treating their own waste and being required to report on the effluent produced that is often discharged back into our water sources. Level and flow instrumentation is essential to ensure efficiency and compliance. Pulsar Measurement provides a wide range of measurement solutions, from non-contacting flow sensors that simply strap to the outside of a pipe, to high accuracy MCERT Certified flow measurement systems that help end-users track and monitor their ...
By Pulsar Measurement Office in Klang, MALAYSIA.
-
Measurement solution for CO2 capture by amine absorption
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the ...
By Protea Limited Distributor in Shanghai, CHINA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you